GPSD_JSON(5)

NAME
gpsd_json - gpsd request/response protocol

OVERVIEW

gpsd is a service daemon that can be used to monitor GPSes, DGPS receivers, Marine AIS broadcasts, and various other location-related and kinematic sensors.

Clients may communicate with gpsd via textual requests and responses over a socket. It is a bad idea for applications to speak the protocol directly: rather, they should use the libgps client library (for C; bindings also exist for other languages) and take appropriate care to conditionalize their code on the major and minor protocol version symbols.

The GPSD protocol is built on top of JSON, JavaScript Object Notation, as specified in RFC 7159: The JavaScript Object Notation (JSON) Data Interchange Format. GPSD's use of JSON is restricted in some ways that make parsing it in fixed-extent languages (such as C) easier.

A request line is introduced by "?" and may include multiple commands. Commands begin with a command identifier, followed either by a terminating ';' or by an equal sign "=" and a JSON object treated as an argument. Any ';' or newline indication (either LF or CR-LF) after the end of a command is ignored. All request lines must be composed of US-ASCII characters and may be no more than 80 characters in length, exclusive of the trailing newline.

Responses are JSON objects all of which have a "class" attribute the value of which is either the name of the invoking command. There are reports (including but not limited to as "TPV", "SKY", "DEVICE", and "ERROR") which are not direct responses to commands.

The order of JSON attributes within a response object is never significant, and you may specify attributes in commands in any order. Responses never contain the special JSON value null; instead, attributes with empty or undefined values are omitted. The length limit for responses and reports is 1536 characters, including trailing newline; longer responses will be truncated, so client code must be prepared for the possibility of invalid JSON fragments.

In JSON reports, if an attribute is present only if the parent attribute is present or has a particular range, then the parent attribute is emitted first.

There is one constraint on the order in which attributes will be omitted. If an optional attribute is present only when a parent attribute has a specified value or range of values, the parent attribute will be emitted first to make parsing easier.

The next subsection section documents the core GPSD protocol. Extensions are documented in the following subsections. The extensions may not be supported in your gpsd instance if it has been compiled with a restricted feature set.

CORE SOCKET PROTOCOL

Here are the core-protocol responses:

TPV A TPV object is a time-position-velocity report. The "class" and "mode" fields will reliably be present. The "mode" field will be emitted before optional fields that may be absent when there is no fix. Error estimates will be emitted after the fix components they're associated with. Others may be reported or not depending on the fix quality. All error estimates (epc, epd, epe, eph, ept, epv, epx, epy) are assumed to be 95% confidence, may also be 50%, one sigma, or two sigma confidence. Many GPS do not specify a confidence level. No GPS specifies how the value is calculated. Use error estimates with caution, and only as relative "goodness" indicators. If the GPS reports a value to gpsd, then gpsd will report that value. Otherwise gpsd will try to compute the value from the skyview. Table&#160;1.&#160;TPV objectNameAlways?TypeDescriptionclassYesstringFixed: "TPV"deviceNostringName of originating device.statusNonumericGPS status: %d, 2=DGPS fix, otherwise not present.modeYesnumericNMEA mode: %d, 0=no mode value yet seen, 1=no fix, 2=2D, 3=3D.timeNostringTime/date stamp in ISO8601 format, UTC. May have a
        fractional part of up to .001sec precision. May be absent if mode
            is not 2 or 3.altNonumericAltitude in meters. Present if mode is 3.climbNonumericClimb (positive) or sink (negative) rate, meters per
        second.datumNostringCurrent datum.epcNonumericEstimated climb error in meters per second. Present
            if consecutive 3D fixes.epdNonumericEstimated track (direction) error in degrees. Present if
            consecutive 2D fixes.ephNonumericEstimated horizontal Position (2D) Error in meters.
            Also known as Estimated Position Error (epe). Present
            if mode is 2D or 3D and DOPs can be calculated from the satellite
            view.epsNonumericEstimated speed error in meters per second. Present
            for consecutive 2D or 3D fixes.eptNonumericEstimated timestamp error in seconds.
            Present if time is present.epxNonumericLongitude error estimate in meters. Present
            if mode is 2D or 3D and DOPs can be calculated from the satellite
            view.epyNonumericLatitude error estimate in meters. Present
            if mode is 2 or 3 and DOPs can be calculated from the satellite
            view.epvNonumericEstimated vertical error in meters. Present
            if mode is 3 and DOPs can be calculated from the satellite
            view.latNonumericLatitude in degrees: +/- signifies North/South. Present
            when mode is 2 or 3.leapsecondsintegerCurrent leap seconds. &#160;lonNonumericLongitude in degrees: +/- signifies East/West. Present
            when mode is 2 or 3.trackNonumericCourse over ground, degrees from true north.magtrackNonumericCourse over ground, degrees magnetic.speedNonumericSpeed over ground, meters per second.ecefxNonumericECEF X position in meters.ecefyNonumericECEF Y position in meters.ecefzNonumericECEF Z position in meters.ecefpAccNonumericECEF position error in meters.ecefvxNonumericECEF X velocity in meters/second.ecefvyNonumericECEF Y velocity in meters/second.ecefvzNonumericECEF Z velocity in meters/second.ecefvAccNonumericECEF velocity error in meters/second.sepNonumericEstimated Spherical (3D) Position Error in meters.
             Present if mode is 3D and DOPs can be calculated from the satellite
            view. Assumed to be 95% confidence, but many GPS do not specify.
            When the C client library parses a response of this kind, it will assert validity bits in the top-level set member for each field actually received; see gps.h for bitmask names and values. Here's an example:
    {"class":"TPV","device":"/dev/pts/1",
        "time":"2005-06-08T10:34:48.283Z","ept":0.005,
        "lat":46.498293369,"lon":7.567411672,"alt":1343.127,
        "eph":36.000,"epv":32.321,
        "track":10.3788,"speed":0.091,"climb":-0.085,"mode":3}

SKY A SKY object reports a sky view of the GPS satellite positions. If there is no GPS device available, or no skyview has been reported yet, only the "class" field will reliably be present. Table&#160;2.&#160;SKY objectNameAlways?TypeDescriptionclassYesstringFixed: "SKY"deviceNostringName of originating devicetimeNostringTime/date stamp in ISO8601 format, UTC. May have a
        fractional part of up to .001sec precision.gdopNonumericGeometric (hyperspherical) dilution of precision, a
            combination of PDOP and TDOP. A dimensionless factor which
            should be multiplied by a base UERE
            to get an error estimate.hdopNonumericHorizontal dilution of precision, a dimensionless
        factor which should be multiplied by a base UERE to get a
        circular error estimate.pdopNonumericPosition (spherical/3D) dilution of precision, a dimensionless
        factor which should be multiplied by a base UERE to get an
        error estimate.tdopNonumericTime dilution of precision, a dimensionless
        factor which should be multiplied by a base UERE to get an
        error estimate.vdopNonumericVertical (altitude) dilution of precision, a dimensionless
        factor which should be multiplied by a base UERE to get an
        error estimate.xdopNonumericLongitudinal dilution of precision, a dimensionless
        factor which should be multiplied by a base UERE to get an
        error estimate.ydopNonumericLatitudinal dilution of precision, a dimensionless
        factor which should be multiplied by a base UERE to get an
        error estimate.satellitesYeslistList of satellite objects in skyviewMany devices compute dilution of precision factors but do not include them in their reports. Many that do report DOPs report only HDOP, two-dimensional circular error. gpsd always passes through whatever the device actually reports, then attempts to fill in other DOPs by calculating the appropriate determinants in a covariance matrix based on the satellite view. DOPs may be missing if some of these determinants are singular. It can even happen that the device reports an error estimate in meters when the corresponding DOP is unavailable; some devices use more sophisticated error modeling than the covariance calculation. The satellite list objects have the following elements: Table&#160;3.&#160;Satellite objectNameAlways?TypeDescriptionPRNYesnumericPRN ID of the satellite. 1-63 are GNSS satellites,
        64-96 are GLONASS satellites, 100-164 are SBAS satellitesazYesnumericAzimuth, degrees from true north.elYesnumericElevation in degrees.ssYesnumericSignal strength in dB.usedYesbooleanUsed in current solution? (SBAS/WAAS/EGNOS satellites
        may be flagged used if the solution has corrections from them,
        but not all drivers make this information available.)gnssidNonumericThe GNSS ID, as defined by u-blox, not NMEA. 0=GPS,
            2=Galileo, 3=Beidou, 5=QZSS, 6-GLONASS.svidnonumericThe satellite ID within its constellation. As defined
            by u-blox, not NMEA).sigidnonumericThe signal ID of this signal. As defined by u-blox, not
            NMEA. See u-blox doc for details.Note that satellite objects do not have a "class" field, as they are never shipped outside of a SKY object. When the C client library parses a SKY response, it will assert the SATELLITE_SET bit in the top-level set member. Here's an example:
    {"class":"SKY","device":"/dev/pts/1",
        "time":"2005-07-08T11:28:07.114Z",
        "xdop":1.55,"hdop":1.24,"pdop":1.99,
        "satellites":[
            {"PRN":23,"el":6,"az":84,"ss":0,"used":false},
            {"PRN":28,"el":7,"az":160,"ss":0,"used":false},
            {"PRN":8,"el":66,"az":189,"ss":44,"used":true},
            {"PRN":29,"el":13,"az":273,"ss":0,"used":false},
            {"PRN":10,"el":51,"az":304,"ss":29,"used":true},
            {"PRN":4,"el":15,"az":199,"ss":36,"used":true},
            {"PRN":2,"el":34,"az":241,"ss":43,"used":true},
            {"PRN":27,"el":71,"az":76,"ss":43,"used":true}]}

GST A GST object is a pseudorange noise report. Table&#160;4.&#160;GST objectNameAlways?TypeDescriptionclassYesstringFixed: "GST"deviceNostringName of originating devicetimeNostringTime/date stamp in ISO8601 format, UTC. May have a
        fractional part of up to .001sec precision.rmsNonumericValue of the standard deviation of the range inputs to the navigation process (range inputs include pseudoranges and DGPS corrections).majorNonumericStandard deviation of semi-major axis of error ellipse, in meters.minorNonumericStandard deviation of semi-minor axis of error ellipse, in meters.orientNonumericOrientation of semi-major axis of error ellipse, in degrees from true north.latNonumericStandard deviation of latitude error, in meters.lonNonumericStandard deviation of longitude error, in meters.altNonumericStandard deviation of altitude error, in meters.Here's an example:
    {"class":"GST","device":"/dev/ttyUSB0",
            "time":"2010-12-07T10:23:07.096Z","rms":2.440,
            "major":1.660,"minor":1.120,"orient":68.989,
            "lat":1.600,"lon":1.200,"alt":2.520}

ATT An ATT object is a vehicle-attitude report. It is returned by digital-compass and gyroscope sensors; depending on device, it may include: heading, pitch, roll, yaw, gyroscope, and magnetic-field readings. Because such sensors are often bundled as part of marine-navigation systems, the ATT response may also include water depth. The "class" and "mode" fields will reliably be present. Others may be reported or not depending on the specific device type. Table&#160;5.&#160;ATT objectNameAlways?TypeDescriptionclassYesstringFixed: "ATT"deviceYesstringName of originating devicetimeNostringTime/date stamp in ISO8601 format, UTC. May have a
        fractional part of up to .001sec precision.headingNonumericHeading, degrees from true north.mag_stNostringMagnetometer status.pitchNonumericPitch in degrees.pitch_stNostringPitch sensor status.yawNonumericYaw in degreesyaw_stNostringYaw sensor status.rollNonumericRoll in degrees.roll_stNostringRoll sensor status.dipNonumericLocal magnetic inclination, degrees, positive when the magnetic field points downward (into the Earth).mag_lenNonumericScalar magnetic field strength.mag_xNonumericX component of magnetic field strength.mag_yNonumericY component of magnetic field strength.mag_zNonumericZ component of magnetic field strength.acc_lenNonumericScalar acceleration.acc_xNonumericX component of acceleration.acc_yNonumericY component of acceleration.acc_zNonumericZ component of acceleration.gyro_xNonumericX component of acceleration.gyro_yNonumericY component of acceleration.depthNonumericWater depth in meters.tempNonumericTemperature at sensor, degrees centigrade.The heading, pitch, and roll status codes (if present) vary by device. For the TNT Revolution digital compasses, they are coded as follows: Table&#160;6.&#160;Device flagsCodeDescriptionCmagnetometer calibration alarmLlow alarmMlow warningNnormalOhigh warningPhigh alarmVmagnetometer voltage level alarmWhen the C client library parses a response of this kind, it will assert ATT_IS. Here's an example:
    {"class":"ATT","time":1270938096.843,
        "heading":14223.00,"mag_st":"N",
        "pitch":169.00,"pitch_st":"N", "roll":-43.00,"roll_st":"N",
        "dip":13641.000,"mag_x":2454.000}

And here are the commands:

?VERSION;
    Returns an object with the following attributes: Table&#160;7.&#160;VERSION objectNameAlways?TypeDescriptionclassYesstringFixed: "VERSION"releaseYesstringPublic release levelrevYesstringInternal revision-control level.proto_majorYesnumericAPI major revision level.proto_minorYesnumericAPI minor revision level.remoteNostringURL of the remote daemon reporting this version. If
            empty, this is the version of the local daemon.The daemon ships a VERSION response to each client when the client first connects to it. When the C client library parses a response of this kind, it will assert the VERSION_SET bit in the top-level set member. Here's an example:
    {"class":"VERSION","version":"2.40dev",
        "rev":"06f62e14eae9886cde907dae61c124c53eb1101f",
        "proto_major":3,"proto_minor":1
    }

?DEVICES;
    Returns a device list object with the following elements: Table&#160;8.&#160;DEVICES objectNameAlways?TypeDescriptionclassYesstringFixed: "DEVICES"devicesYeslistList of device descriptionsremoteNostringURL of the remote daemon reporting the device set. If
            empty, this is a DEVICES response from the local daemon.When the C client library parses a response of this kind, it will assert the DEVICELIST_SET bit in the top-level set member. Here's an example:
    {"class"="DEVICES","devices":[
        {"class":"DEVICE","path":"/dev/pts/1","flags":1,"driver":"SiRF binary"},
        {"class":"DEVICE","path":"/dev/pts/3","flags":4,"driver":"AIVDM"}]}
    The daemon occasionally ships a bare DEVICE object to the client (that is, one not inside a DEVICES wrapper). The data content of these objects will be described later as a response to the ?DEVICE command.

?WATCH;
    This command sets watcher mode. It also sets or elicits a report of per-subscriber policy and the raw bit. An argument WATCH object changes the subscriber's policy. The response describes the subscriber's policy. The response will also include a DEVICES object. A WATCH object has the following elements: Table&#160;9.&#160;WATCH objectNameAlways?TypeDescriptionclassYesstringFixed: "WATCH"enableNobooleanEnable (true) or disable (false) watcher mode. Default
        is true.jsonNobooleanEnable (true) or disable (false) dumping of JSON reports.
        Default is false.nmeaNobooleanEnable (true) or disable (false) dumping of binary
        packets as pseudo-NMEA. Default
        is false.rawNointegerControls 'raw' mode. When this attribute is set to 1
        for a channel, gpsd reports the
        unprocessed NMEA or AIVDM data stream from whatever device is attached.
        Binary GPS packets are hex-dumped. RTCM2 and RTCM3
            packets are not dumped in raw mode. When this attribute is set to
        2 for a channel that processes binary data,
        gpsd reports the received data verbatim
        without hex-dumping.scaledNobooleanIf true, apply scaling divisors to output before
        dumping; default is false.split24NobooleanIf true, aggregate AIS type24 sentence parts. If false,
            report each part as a separate JSON object, leaving the
            client to match MMSIs and aggregate. Default is
            false. Applies only to AIS reports.ppsNobooleanIf true, emit the TOFF JSON message on each cycle and a
        PPS JSON message when the device issues 1PPS. Default is false.deviceNostringIf present, enable watching only of the specified device
        rather than all devices. Useful with raw and NMEA modes
        in which device responses aren't tagged. Has no effect when
        used with enable:false.remoteNostringURL of the remote daemon reporting the watch set. If
            empty, this is a WATCH response from the local daemon.There is an additional boolean "timing" attribute which is undocumented because that portion of the interface is considered unstable and for developer use only. In watcher mode, GPS reports are dumped as TPV and SKY responses. AIS, Subframe and RTCM reporting is described in the next section. When the C client library parses a response of this kind, it will assert the POLICY_SET bit in the top-level set member. Here's an example:
    {"class":"WATCH", "raw":1,"scaled":true}

?POLL;
    The POLL command requests data from the last-seen fixes on all active GPS devices. Devices must previously have been activated by ?WATCH to be pollable. Polling can lead to possibly surprising results when it is used on a device such as an NMEA GPS for which a complete fix has to be accumulated from several sentences. If you poll while those sentences are being emitted, the response will contain the last complete fix data and may be as much as one cycle time (typically 1 second) stale. The POLL response will contain a timestamped list of TPV objects describing cached data, and a timestamped list of SKY objects describing satellite configuration. If a device has not seen fixes, it will be reported with a mode field of zero. Table&#160;10.&#160;POLL objectNameAlways?TypeDescriptionclassYesstringFixed: "POLL"timeYesNumericTimestamp in ISO 8601 format. May have a
        fractional part of up to .001sec precision.activeYesNumericCount of active devices.tpvYesJSON arrayComma-separated list of TPV objects.skyYesJSON arrayComma-separated list of SKY objects.Here's an example of a POLL response:
    {"class":"POLL","time":"2010-06-04T10:31:00.289Z","active":1,
        "tpv":[{"class":"TPV","device":"/dev/ttyUSB0",
                "time":"2010-09-08T13:33:06.095Z",
    	    "ept":0.005,"lat":40.035093060,
                "lon":-75.519748733,"track":99.4319,"speed":0.123,"mode":2}],
        "sky":[{"class":"SKY","device":"/dev/ttyUSB0",
                "time":1270517264.240,"hdop":9.20,
                "satellites":[{"PRN":16,"el":55,"az":42,"ss":36,"used":true},
                              {"PRN":19,"el":25,"az":177,"ss":0,"used":false},
                              {"PRN":7,"el":13,"az":295,"ss":0,"used":false},
                              {"PRN":6,"el":56,"az":135,"ss":32,"used":true},
                              {"PRN":13,"el":47,"az":304,"ss":0,"used":false},
                              {"PRN":23,"el":66,"az":259,"ss":0,"used":false},
                              {"PRN":20,"el":7,"az":226,"ss":0,"used":false},
                              {"PRN":3,"el":52,"az":163,"ss":32,"used":true},
                              {"PRN":31,"el":16,"az":102,"ss":0,"used":false}
    ]}]}

  Note
Client software should not assume the field inventory of the POLL response is fixed for all time. As gpsd collects and caches more data from more sensor types, those data are likely to find their way into this response.

TOFF
    This message is emitted on each cycle and reports the offset between the host's clock time and the GPS time at top of second (actually, when the first data for the reporting cycle is received). This message exactly mirrors the PPS message except for two details. TOFF emits no NTP precision, this is assumed to be -2. See the NTP documentation for their definition of precision. The TOFF message reports the GPS time as derived from the GPS serial data stream. The PPS message reports the GPS time as derived from the GPS PPS pulse. A TOFF object has the following elements: Table&#160;11.&#160;TOFF objectNameAlways?TypeDescriptionclassYesstringFixed: "TOFF"deviceYesstringName of originating devicereal_secYesnumericseconds from the GPS clockreal_nsecYesnumericnanoseconds from the GPS clockclock_secYesnumericseconds from the system clockclock_nsecYesnumericnanoseconds from the system clockThis message is emitted once per second to watchers of a device and is intended to report the time stamps of the in-band report of the GPS and seconds as reported by the system clock (which may be NTP-corrected) when the first valid timestamp of the reporting cycle was seen. The message contains two second/nanosecond pairs: real_sec and real_nsec contain the time the GPS thinks it was at the start of the current cycle; clock_sec and clock_nsec contain the time the system clock thinks it was on receipt of the first timing message of the cycle. real_nsec is always to nanosecond precision. clock_nsec is nanosecond precision on most systems. Here's an example:
    {"class":"TOFF","device":"/dev/ttyUSB0",
         "real_sec":1330212592, "real_nsec":343182,
         "clock_sec":1330212592,"clock_nsec":343184,
         "precision":-2}}

PPS This message is emitted each time the daemon sees a valid PPS (Pulse Per Second) strobe from a device. This message exactly mirrors the TOFF message except for two details. PPS emits the NTP precision. See the NTP documentation for their definition of precision. The TOFF message reports the GPS time as derived from the GPS serial data stream. The PPS message reports the GPS time as derived from the GPS PPS pulse. There are various sources of error in the reported clock times. The speed of the serial connection between the GPS and the system adds a delay to start of cycle detection. An even bigger error is added by the variable computation time inside the GPS. Taken together the time derived from the start of the GPS cycle can have offsets of 10 millisecond to 700 milliseconds and combined jjitter and wander of 100 to 300 millisecond. A PPS object has the following elements: Table&#160;12.&#160;PPS objectNameAlways?TypeDescriptionclassYesstringFixed: "PPS"deviceYesstringName of originating devicereal_secYesnumericseconds from the PPS sourcereal_nsecYesnumericnanoseconds from the PPS sourceclock_secYesnumericseconds from the system clockclock_nsecYesnumericnanoseconds from the system clockprecisionYesnumericNTP style estimate of PPS precisionThis message is emitted once per second to watchers of a device emitting PPS, and reports the time of the start of the GPS second (when the 1PPS arrives) and seconds as reported by the system clock (which may be NTP-corrected) at that moment. The message contains two second/nanosecond pairs: real_sec and real_nsec contain the time the GPS thinks it was at the PPS edge; clock_sec and clock_nsec contain the time the system clock thinks it was at the PPS edge. real_nsec is always to nanosecond precision. clock_nsec is nanosecond precision on most systems. There are various sources of error in the reported clock times. For PPS delivered via a real serial-line strobe, serial-interrupt latency plus processing time to the timer call should be bounded above by about 10 microseconds; that can be reduced to less than 1 microsecond if your kernel supports RFC 2783. USB1.1-to-serial control-line emulation is limited to about 1 millisecond. seconds. Here's an example:
    {"class":"PPS","device":"/dev/ttyUSB0",
         "real_sec":1330212592, "real_nsec":343182,
         "clock_sec":1330212592,"clock_nsec":343184,
         "precision":-3}

OSC This message reports the status of a GPS-disciplined oscillator (GPSDO). The GPS PPS output (which has excellent long-term stability) is typically used to discipline a local oscillator with much better short-term stability (such as a rubidium atomic clock). An OSC object has the following elements: Table&#160;13.&#160;OSC objectNameAlways?TypeDescriptionclassYesstringFixed: "OSC"deviceYesstringName of originating device.runningYesbooleanIf true, the oscillator is currently running. Oscillators may require warm-up time at start of day.referenceYesbooleanIf true, the oscillator is receiving a GPS PPS signal.disciplinedYesbooleanIf true, the GPS PPS signal is sufficiently stable and is being used to discipline the local oscillator.deltaYesnumericThe time difference (in nanoseconds) between the GPS-disciplined oscillator PPS output pulse and the most recent GPS PPS input pulse.Here's an example:
    {"class":"OSC","running":true,"device":"/dev/ttyUSB0",
        "reference":true,"disciplined":true,"delta":67}

?DEVICE
    This command reports (when followed by ';') the state of a device, or sets (when followed by '=' and a DEVICE object) device-specific control bits, notably the device's speed and serial mode and the native-mode bit. The parameter-setting form will be rejected if more than one client is attached to the channel. Pay attention to the response, because it is possible for this command to fail if the GPS does not support a speed-switching command or only supports some combinations of serial modes. In case of failure, the daemon and GPS will continue to communicate at the old speed. Use the parameter-setting form with caution. On USB and Bluetooth GPSes it is also possible for serial mode setting to fail either because the serial adaptor chip does not support non-8N1 modes or because the device firmware does not properly synchronize the serial adaptor chip with the UART on the GPS chipset when the speed changes. These failures can hang your device, possibly requiring a GPS power cycle or (in extreme cases) physically disconnecting the NVRAM backup battery. A DEVICE object has the following elements: Table&#160;14.&#160;DEVICE objectNameAlways?TypeDescriptionclassYesstringFixed: "DEVICE"pathNostringName the device for which the control bits are
        being reported, or for which they are to be applied. This
            attribute may be omitted only when there is exactly one
            subscribed channel.activatedNostringTime the device was activated as an ISO8601
            timestamp. If the device is inactive this attribute is
            absent.flagsNointegerBit vector of property flags. Currently defined flags are:
            describe packet types seen so far (GPS, RTCM2, RTCM3,
        AIS). Won't be reported if empty, e.g. before
        gpsd has seen identifiable packets
        from the device.driverNostringGPSD's name for the device driver type. Won't be reported before
        gpsd has seen identifiable packets
        from the device.subtypeWhen the daemon sees a delayed response to a probe for
        subtype or firmware-version information.stringWhatever version information the device returned.bpsNointegerDevice speed in bits per second.parityNostringN, O or E for no parity, odd, or even. stopbitsYesstringStop bits (1 or 2). nativeNointeger0 means NMEA mode and 1 means
        alternate mode (binary if it has one, for SiRF and Evermore chipsets
        in particular). Attempting to set this mode on a non-GPS
        device will yield an error.cycleNorealDevice cycle time in seconds.mincycleNorealDevice minimum cycle time in seconds. Reported from
        ?DEVICE when (and only when) the rate is switchable. It is
        read-only and not settable.The serial parameters will (bps, parity, stopbits) be omitted in a response describing a TCP/IP source such as an Ntrip, DGPSIP, or AIS feed; on a serial device they will always be present. The contents of the flags field should be interpreted as follows: Table&#160;15.&#160;Device flagsC #defineValueDescriptionSEEN_GPS0x01GPS data has been seen on this deviceSEEN_RTCM20x02RTCM2 data has been seen on this deviceSEEN_RTCM30x04RTCM3 data has been seen on this deviceSEEN_AIS0x08AIS data has been seen on this deviceWhen the C client library parses a response of this kind, it will assert the DEVICE_SET bit in the top-level set member. Here's an example:
    {"class":"DEVICE","bps":4800,"parity":"N","stopbits":1,"native":0}

When a client is in watcher mode, the daemon will ship it DEVICE notifications when a device is added to the pool or deactivated.

When the C client library parses a response of this kind, it will assert the DEVICE_SET bit in the top-level set member.

Here's an example:
{"class":"DEVICE","path":"/dev/pts1","activated":0}

The daemon may ship an error object in response to a syntactically invalid command line or unknown command. It has the following elements: Table&#160;16.&#160;ERROR notification objectNameAlways?TypeDescriptionclassYesstringFixed: "ERROR"messageYesstringTextual error message

Here's an example:
{"class":"ERROR","message":"Unrecognized request '?FOO'"}

When the C client library parses a response of this kind, it will assert the ERR_SET bit in the top-level set member.

RTCM2

RTCM-104 is a family of serial protocols used for broadcasting pseudorange corrections from differential-GPS reference stations. Many GPS receivers can accept these corrections to improve their reporting accuracy.

RTCM-104 comes in two major and incompatible flavors, 2.x and 3.x. Each major flavor has minor (compatible) revisions.

The applicable standard for RTCM Version 2.x is RTCM Recommended Standards for Differential NAVSTAR GPS Service RTCM Paper 194-93/SC 104-STD. For RTCM 3.1 it is RTCM Paper 177-2006-SC104-STD. Ordering instructions for both standards are accessible from the website of the Radio Technical Commission for Maritime Services: http://www.rtcm.org/ under "Publications".

  RTCM WIRE TRANSMISSIONS

Differential-GPS correction stations consist of a GPS reference receiver coupled to a low frequency (LF) transmitter. The GPS reference receiver is a survey-grade GPS that does GPS carrier tracking and can work out its own position to a few millimeters. It generates range and range-rate corrections and encodes them into RTCM104. It ships the RTCM104 to the LF transmitter over serial rs-232 signal at 100 baud or 200 baud depending on the requirements of the transmitter.

The LF transmitter broadcasts the approximately 300khz radio signal that differential-GPS radio receivers pick up. Transmitters that are meant to have a higher range will need to transmit at the slower rate. The higher the data rate the harder it will be for the remote radio receiver to receive with a good signal-to-noise ration. (Higher data rate signals can't be averaged over as long a time frame, hence they appear noisier.)

  RTCM WIRE FORMATS

An RTCM 2.x message consists of a sequence of up to 33 30-bit words. The 24 most significant bits of each word are data and the six least significant bits are parity. The parity algorithm used is the same ISGPS-2000 as that used on GPS satellite downlinks. Each RTCM 2.x message consists of two header words followed by zero or more data words, depending upon message type.

An RTCM 3.x message begins with a fixed leader byte 0xD3. That is followed by six bits of version information and 10 bits of payload length information. Following that is the payload; following the payload is a 3-byte checksum of the payload using the Qualcomm CRC-24Q algorithm.

  RTCM2 JSON FORMAT

Each RTCM2 message is dumped as a single JSON object per message, with the message fields as attributes of that object. Arrays of satellite, station, and constellation statistics become arrays of JSON sub-objects. Each sentence will normally also have a "device" field containing the pathname of the originating device.

All attributes other than the device field are mandatory. Header attributes are emitted before others. Table&#160;17.&#160;SKY objectNameType

Description classstring

Fixed: "RTCM2". typeinteger

Message type (1-9). station_idinteger

The id of the GPS reference receiver. The LF transmitters also have (different) id numbers. zcountreal

The reference time of the corrections in the message in seconds within the current hour. Note that it is in GPS time, which is some seconds ahead of UTC (see the U.S. Naval Observatory's table of leap second corrections: ftp://maia.usno.navy.mil/ser7/tai-utc.dat). seqnuminteger

Sequence number. Only 3 bits wide, wraps after 7. lengthinteger

The number of words after the header that comprise the message. station_healthinteger

Station transmission status. Indicates the health of the beacon as a reference source. Any nonzero value means the satellite is probably transmitting bad data and should not be used in a fix. 6 means the transmission is unmonitored. 7 means the station is not working properly. Other values are defined by the beacon operator.

<message type> is one of

1   full corrections - one message containing corrections for all GPS satellites in view. This is not common.

3   reference station parameters - the position of the reference station GPS antenna.

4   datum -- the datum to which the DGPS data is referred.

5   constellation health -- information about the satellites the beacon can see.

6   null message -- just a filler.

7   radio beacon almanac -- information about this or other beacons.

9   subset corrections -- a message containing corrections for only a subset of the GPS satellites in view.

16  special message -- a text message from the beacon operator.

31  GLONASS subset corrections -- a message containing corrections for a set of the GLONASS satellites in view.

One or more satellite objects follow the header for type 1 or type 9 messages. Here is the format: Table&#160;18.&#160;Satellite objectNameType

Description identinteger

The PRN number of the satellite for which this is correction data. udreinteger

User Differential Range Error (0-3). See the table following for values. iodinteger

Issue Of Data, matching the IOD for the current ephemeris of this satellite, as transmitted by the satellite. The IOD is a unique tag that identifies the ephemeris; the GPS using the DGPS correction and the DGPS generating the data must use the same orbital positions for the satellite. prcreal

The pseudorange error in meters for this satellite as measured by the beacon reference receiver at the epoch indicated by the z_count in the parent record. rrcreal

The rate of change of pseudorange error in meters/sec for this satellite as measured by the beacon reference receiver at the epoch indicated by the z_count field in the parent record. This is used to calculate pseudorange errors at other epochs, if required by the GPS receiver.

User Differential Range Error values are as follows:
Table&#160;19.&#160;UDRE values01-sigma error    <= 1m11-sigma error    <= 4m21-sigma error    <= 8m31-sigma error    >  8m

Here's an example:
{"class":"RTCM2","type":1,
    "station_id":688,"zcount":843.0,"seqnum":5,"length":19,"station_health":6,
    "satellites":[
	{"ident":10,"udre":0,"iod":46,"prc":-2.400,"rrc":0.000},
	{"ident":13,"udre":0,"iod":94,"prc":-4.420,"rrc":0.000},
	{"ident":7,"udre":0,"iod":22,"prc":-5.160,"rrc":0.002},
	{"ident":2,"udre":0,"iod":34,"prc":-6.480,"rrc":0.000},
	{"ident":4,"udre":0,"iod":47,"prc":-8.860,"rrc":0.000},
	{"ident":8,"udre":0,"iod":76,"prc":-7.980,"rrc":0.002},
	{"ident":5,"udre":0,"iod":99,"prc":-8.260,"rrc":0.002},
	{"ident":23,"udre":0,"iod":81,"prc":-8.060,"rrc":0.000},
	{"ident":16,"udre":0,"iod":70,"prc":-11.740,"rrc":0.000},
	{"ident":30,"udre":0,"iod":4,"prc":-18.960,"rrc":-0.006},
	{"ident":29,"udre":0,"iod":101,"prc":-24.960,"rrc":-0.002}
]}

Here are the payload members of a type 3 (Reference Station Parameters) message: Table&#160;20.&#160;Reference Station ParametersNameType

Description xreal

ECEF X coordinate. yreal

ECEF Y coordinate. zreal

ECEF Z coordinate.

The coordinates are the position of the station, in meters to two decimal places, in Earth Centred Earth Fixed coordinates. These are usually referred to the WGS84 reference frame, but may be referred to NAD83 in the US (essentially identical to WGS84 for all except geodesists), or to some other reference frame in other parts of the world.

An invalid reference message is represented by a type 3 header without payload fields.

Here's an example:
{"class":"RTCM2","type":3,
    "station_id":652,"zcount":1657.2,"seqnum":2,"length":4,"station_health":6,
    "x":3878620.92,"y":670281.40,"z":5002093.59
}

Here are the payload members of a type 4 (Datum) message: Table&#160;21.&#160;DatumNameType

Description dgnss_typestring

Either "GPS", "GLONASS", "GALILEO", or "UNKNOWN". datinteger

0 or 1 and indicates the sense of the offset shift given by dx, dy, dz. dat = 0 means that the station coordinates (in the reference message) are referred to a local datum and that adding dx, dy, dz to that position will render it in GNSS coordinates (WGS84 for GPS). If dat = 1 then the ref station position is in GNSS coordinates and adding dx, dy, dz will give it referred to the local datum. datum_namestring

A standard name for the datum. dxreal

X offset. dyreal

Y offset. dzreal

Z offset.

<dx> <dy> <dz> are offsets to convert from local datum to GNSS datum or vice versa. These fields are optional.

An invalid datum message is represented by a type 4 header without payload fields.

One or more of these follow the header for type 5 messages -- one for each satellite.

Here is the format: Table&#160;22.&#160;Constellation healthNameType

Description identinteger

The PRN number of the satellite. iodlbool

True indicates that this information relates to the satellite information in an accompanying type 1 or type 9 message. healthinteger0 indicates that the satellite is healthy. Any other value
    indicates a problem (coding is not known).

snrinteger

The carrier/noise ratio of the received signal in the range 25 to 55 dB(Hz). health_enbool

If set to True it indicates that the satellite is healthy even if the satellite navigation data says it is unhealthy. new_databoolTrue indicates that the IOD for this satellite will
        soon be updated in type 1 or 9 messages.

los_warningbool

Line-of-sight warning. True indicates that the satellite will shortly go unhealthy. touinteger

Healthy time remaining in seconds.

This just indicates a null message. There are no payload fields.

This format is used to dump message words in hexadecimal when the message type field doesn't match any of the known ones.

Here is the format: Table&#160;23.&#160;Unknown MessageNameType

Description datalist

A list of strings.

Each string in the array is a hex literal representing 30 bits of information, after parity checks and inversion. The high two bits should be ignored.

Here is the format: Table&#160;24.&#160;Contellation healthNameType

Description latreal

Latitude in degrees, of the LF transmitter antenna for the station for which this is an almanac. North is positive. lonreal

Longitude in degrees, of the LF transmitter antenna for the station for which this is an almanac. East is positive. rangeintegerPublished range of the station in km.

frequencyreal

Station broadcast frequency in kHz. healthinteger

<health> is the health of the station for which this is an almanac. If it is non-zero, the station is issuing suspect data and should not be used for fixes. The ITU and RTCM104 standards differ about the mode detailed interpretation of the <health> field and even about its bit width. station_idinteger

The id of the transmitter. This is not the same as the reference id in the header, the latter being the id of the reference receiver. bitrateinteger

The transmitted bitrate.

Here's an example:
{"class":"RTCM2","type":9,"station_id":268,"zcount":252.6,
        "seqnum":4,"length":5,"station_health":0,
        "satellites":[
            {"ident":13,"udre":0,"iod":3,"prc":-25.940,"rrc":0.066},
            {"ident":2,"udre":0,"iod":73,"prc":0.920,"rrc":-0.080},
            {"ident":8,"udre":0,"iod":22,"prc":23.820,"rrc":0.014}
]}

Here are the payload members of a type 13 (Groumf Tramitter Parameters) message: Table&#160;25.&#160;Grund Transmitter ParametersNameType

Description statusbool

If True, signals user to expect a type 16 explanatory message associated with this station. Probably indicates some sort of unusual event. rangeflagbool

If True, indicates that the estimated range is different from that found in the Type 7 message (which contains the beacon's listed range). Generally indicates a range reduction due to causes such as poor ionospheric conditions or reduced transmission power. latreal

Degrees latitude, signed. Positive is N, negative is S. lonreal

Degrees longitude, signed. Positive is E, negative is W. rangeinteger

Transmission range in km (1-1024).

This message type replaces message type 3 (Reference Station Parameters) in RTCM 2.3.

Here are the payload members of a type 14 (GPS Time of Week) message: Table&#160;26.&#160;Reference Station ParametersNameType

Description weekinteger

GPS week (0-123). hourinteger

Hour of week (0-167). leapsecsinteger

Leap Seconds (0-63).

Here's an example:
{"class":"RTCM2","type":14,"station_id":652,"zcount":1657.2,
        "seqnum":3,"length":1,"station_health":6,"week":601,"hour":109,
        "leapsecs":15}
Table&#160;27.&#160;Special MessageNameType

Description messagestring

A text message sent by the beacon operator.

One or more GLONASS satellite objects follow the header for type 1 or type 9 messages. Here is the format: Table&#160;28.&#160;Satellite objectNameType

Description identinteger

The PRN number of the satellite for which this is correction data. udreinteger

User Differential Range Error (0-3). See the table following for values. changeboolean

Change-of-ephemeris bit. toduinteger

Count of 30-second periods since the top of the hour. prcreal

The pseudorange error in meters for this satellite as measured by the beacon reference receiver at the epoch indicated by the z_count in the parent record. rrcreal

The rate of change of pseudorange error in meters/sec for this satellite as measured by the beacon reference receiver at the epoch indicated by the z_count field in the parent record. This is used to calculate pseudorange errors at other epochs, if required by the GPS receiver.

Here's an example:
{"class":"RTCM2","type":31,"station_id":652,"zcount":1642.2,
    "seqnum":0,"length":14,"station_health":6,
    "satellites":[
        {"ident":5,"udre":0,"change":false,"tod":0,"prc":132.360,"rrc":0.000},
        {"ident":15,"udre":0,"change":false,"tod":0,"prc":134.840,"rrc":0.002},
        {"ident":14,"udre":0,"change":false,"tod":0,"prc":141.520,"rrc":0.000},
        {"ident":6,"udre":0,"change":false,"tod":0,"prc":127.000,"rrc":0.000},
        {"ident":21,"udre":0,"change":false,"tod":0,"prc":128.780,"rrc":0.000},
        {"ident":22,"udre":0,"change":false,"tod":0,"prc":125.260,"rrc":0.002},
        {"ident":20,"udre":0,"change":false,"tod":0,"prc":117.280,"rrc":-0.004},
        {"ident":16,"udre":0,"change":false,"tod":17,"prc":113.460,"rrc":0.018}
]}

RTCM3 DUMP FORMAT

The support for RTCM104v3 dumping is incomplete and buggy. Do not attempt to use it for production! Anyone interested in it should read the source code.

AIS DUMP FORMATS

AIS support is an extension. It may not be present if your instance of gpsd has been built with a restricted feature set.

AIS packets are dumped as JSON objects with class "AIS". Each AIS report object contains a "type" field giving the AIS message type and a "scaled" field telling whether the remainder of the fields are dumped in scaled or unscaled form. (These will be emitted before any type-specific fields.) It will also contain a "device" field naming the data source. Other fields have names and types as specified in the AIVDM/AIVDO Protocol Decoding document on the GPSD project website; each message field table may be directly interpreted as a specification for the members of the corresponding JSON object type.

By default, certain scaling and conversion operations are performed for JSON output. Latitudes and longitudes are scaled to decimal degrees rather than the native AIS unit of 1/10000th of a minute of arc. Ship (but not air) speeds are scaled to knots rather than tenth-of-knot units. Rate of turn may appear as "nan" if is unavailable, or as one of the strings "fastright" or "fastleft" if it is out of the AIS encoding range; otherwise it is quadratically mapped back to the turn sensor number in degrees per minute. Vessel draughts are converted to decimal meters rather than native AIS decimeters. Various other scaling conversions are described in "AIVDM/AIVDO Protocol Decoding".

SUBFRAME DUMP FORMATS

Subframe support is always compiled into gpsd but many GPSes do not output subframe data or the gpsd driver may not support subframes.

Subframe packets are dumped as JSON objects with class "SUBFRAME". Each subframe report object contains a "frame" field giving the subframe number, a "tSV" field for the transmitting satellite number, a "TOW17" field containing the 17 MSBs of the start of the next 12-second message and a "scaled" field telling whether the remainder of the fields are dumped in scaled or unscaled form. It will also contain a "device" field naming the data source. Each SUBFRAME object will have a sub-object specific to that subframe page type. Those sub-object fields have names and types similar to those specified in the IS-GPS-200E document; each message field table may be directly interpreted as a specification for the members of the corresponding JSON object type.

SEE ALSO

 gpsd(8), libgps(3),

AUTHOR

The protocol was designed and documented by Eric S. Raymond.