This is nettle.info, produced by makeinfo version 7.1.1 from
nettle.texinfo.

This manual is for the Nettle library (version 4.0), a low-level
cryptographic library.

   Originally written 2001 by Niels Möller, updated 2026.

     This manual is placed in the public domain.  You may freely copy
     it, in whole or in part, with or without modification.  Attribution
     is appreciated, but not required.
INFO-DIR-SECTION Encryption
START-INFO-DIR-ENTRY
* Nettle: (nettle).             A low-level cryptographic library.
END-INFO-DIR-ENTRY


File: nettle.info,  Node: Top,  Next: Introduction,  Up: (dir)

Nettle
******

This document describes the Nettle low-level cryptographic library.  You
can use the library directly from your C programs, or write or use an
object-oriented wrapper for your favorite language or application.

   This manual is for the Nettle library (version 4.0), a low-level
cryptographic library.

   Originally written 2001 by Niels Möller, updated 2026.

     This manual is placed in the public domain.  You may freely copy
     it, in whole or in part, with or without modification.  Attribution
     is appreciated, but not required.

* Menu:

* Introduction::                What is Nettle?
* Copyright::                   Your rights.
* Using Nettle::                Example and conventions.
* Reference::                   All Nettle functions and features.
* Nettle soup::                 For the serious nettle hacker.
* Installation::                How to install Nettle.
* Index::                       Function and concept index.

 -- The Detailed Node Listing --

Using Nettle

* Example::                     An example program.
* Conventions::                 General interface conventions.
* Linking::                     Linking with libnettle and libhogweed.
* Compatibility::               On API and ABI compatibility between versions.

Reference

* Hash functions::
* Cipher functions::
* Cipher modes::
* Authenticated encryption::
* Keyed hash functions::
* Key derivation functions::
* Public-key algorithms::
* Randomness::
* ASCII encoding::
* Miscellaneous functions::

Hash functions

* Recommended hash functions::
* Miscellaneous hash functions::
* Legacy hash functions::
* nettle_hash abstraction::

Cipher functions

* AES::
* Arcfour::
* Arctwo::
* Blowfish::
* Camellia::
* CAST128::
* ChaCha::
* DES::
* DES3::
* Salsa20::
* Serpent::
* SM4::
* Twofish::
* nettle_cipher abstraction::

Cipher modes

* CBC::
* CTR::
* CFB and CFB8::
* XTS::

Authenticated encryption with associated data

* EAX::
* GCM::
* CCM::
* ChaCha-Poly1305::
* OCB::
* SIV-CMAC::
* SIV-GCM::
* nettle_aead abstraction::

Keyed Hash Functions

* HMAC::
* UMAC::
* CMAC::
* Poly1305::

Public-key algorithms

* RSA::                         The RSA public key algorithm.
* DSA::                         The DSA digital signature algorithm.
* Elliptic curves::             Elliptic curves and ECDSA.
* SLH-DSA::                     Stateless hash-based digital signatures.

Elliptic curves

* Side-channel silence::
* ECDSA::
* GOSTDSA::
* Curve 25519 and Curve 448::



File: nettle.info,  Node: Introduction,  Next: Copyright,  Prev: Top,  Up: Top

1 Introduction
**************

Nettle is a cryptographic library that is designed to fit easily in more
or less any context: In crypto toolkits for object-oriented languages
(C++, Python, Pike, ...), in applications like LSH or GNUPG, or even in
kernel space.  In most contexts, you need more than the basic
cryptographic algorithms, you also need some way to keep track of
available algorithms, their properties and variants.  You often have
some algorithm selection process, often dictated by a protocol you want
to implement.

   And as the requirements of applications differ in subtle and not so
subtle ways, an API that fits one application well can be a pain to use
in a different context.  And that is why there are so many different
cryptographic libraries around.

   Nettle tries to avoid this problem by doing one thing, the low-level
crypto stuff, and providing a _simple_ but general interface to it.  In
particular, Nettle doesn't do algorithm selection.  It doesn't do memory
allocation.  It doesn't do any I/O.

   The idea is that one can build several application and context
specific interfaces on top of Nettle, and share the code, test cases,
benchmarks, documentation, etc.  Examples are the Nettle module for the
Pike language, and LSH, which both use an object-oriented abstraction on
top of the library.

   This manual explains how to use the Nettle library.  It also tries to
provide some background on the cryptography, and advice on how to best
put it to use.


File: nettle.info,  Node: Copyright,  Next: Using Nettle,  Prev: Introduction,  Up: Top

2 Copyright
***********

Nettle is dual licenced under the GNU General Public License version 2
or later, and the GNU Lesser General Public License version 3 or later.
When using Nettle, you must comply fully with all conditions of at least
one of these licenses.  A few of the individual files are licensed under
more permissive terms, or in the public domain.  To find the current
status of particular files, you have to read the copyright notices at
the top of the files.

   This manual is in the public domain.  You may freely copy it in whole
or in part, e.g., into documentation of programs that build on Nettle.
Attribution, as well as contribution of improvements to the text, is of
course appreciated, but it is not required.


File: nettle.info,  Node: Using Nettle,  Next: Reference,  Prev: Copyright,  Up: Top

3 Using Nettle
**************

* Menu:

* Example::                     An example program.
* Conventions::                 General interface conventions.
* Linking::                     Linking with libnettle and libhogweed.
* Compatibility::               On API and ABI compatibility between versions.


File: nettle.info,  Node: Example,  Next: Conventions,  Up: Using Nettle

3.1 Example
===========

A simple example program that reads a file from standard input and
writes its SHA256 checksum on standard output should give the flavor of
Nettle.

     #include <stdio.h>
     #include <stdlib.h>
     
     #include <nettle/sha2.h>
     
     #define BUF_SIZE 1000
     
     static void
     display_hex(unsigned length, uint8_t *data)
     {
       unsigned i;
     
       for (i = 0; i<length; i++)
         printf("%02x ", data[i]);
     
       printf("\n");
     }
     
     int
     main(int argc, char **argv)
     {
       struct sha256_ctx ctx;
       uint8_t buffer[BUF_SIZE];
       uint8_t digest[SHA256_DIGEST_SIZE];
       
       sha256_init(&ctx);
       for (;;)
       {
         int done = fread(buffer, 1, sizeof(buffer), stdin);
         sha256_update(&ctx, done, buffer);
         if (done < sizeof(buffer))
           break;
       }
       if (ferror(stdin))
         return EXIT_FAILURE;
     
       sha256_digest(&ctx, digest);
     
       display_hex(SHA256_DIGEST_SIZE, digest);
       return EXIT_SUCCESS;  
     }

   On a typical Unix system, this program can be compiled and linked
with the command line
     gcc sha-example.c -o sha-example -lnettle


File: nettle.info,  Node: Conventions,  Next: Linking,  Prev: Example,  Up: Using Nettle

3.2 Conventions
===============

For each supported algorithm, there is an include file that defines a
_context struct_, a few constants, and declares functions for operating
on the context.  The context struct encapsulates all information needed
by the algorithm, and it can be copied or moved in memory with no
unexpected effects.

   For consistency, functions for different algorithms are very similar,
but there are some differences, for instance reflecting if the key setup
or encryption function differ for encryption and decryption, and whether
or not key setup can fail.  There are also differences between
algorithms that don't show in function prototypes, but which the
application must nevertheless be aware of.  There is no big difference
between the functions for stream ciphers and for block ciphers, although
they should be used quite differently by the application.

   If your application uses more than one algorithm of the same type,
you should probably create an interface that is tailor-made for your
needs, and then write a few lines of glue code on top of Nettle.

   By convention, for an algorithm named ‘foo’, the struct tag for the
context struct is ‘foo_ctx’, constants and functions uses prefixes like
‘FOO_BLOCK_SIZE’ (a constant) and ‘foo_set_key’ (a function).

   In all functions, strings are represented with an explicit length, of
type ‘size_t’, and a pointer of type ‘uint8_t *’ or ‘const uint8_t *’.
For functions that transform one string to another, the argument order
is length, destination pointer and source pointer.  Source and
destination areas are usually of the same length.  When they differ,
e.g., for ‘ccm_encrypt_message’, the length argument specifies the size
of the destination area.  Source and destination pointers may be equal,
so that you can process strings in place, but source and destination
areas _must not_ overlap in any other way.

   Many of the functions lack return value and can never fail.  Those
functions which can fail, return one on success and zero on failure.


File: nettle.info,  Node: Linking,  Next: Compatibility,  Prev: Conventions,  Up: Using Nettle

3.3 Linking
===========

Nettle actually consists of two libraries, ‘libnettle’ and ‘libhogweed’.
The ‘libhogweed’ library contains those functions of Nettle that uses
bignum operations, and depends on the GMP library.  With this division,
linking works the same for both static and dynamic libraries.

   If an application uses only the symmetric crypto algorithms of Nettle
(i.e., block ciphers, hash functions, and the like), it's sufficient to
link with ‘-lnettle’.  If an application also uses public-key
algorithms, the recommended linker flags are ‘-lhogweed -lnettle -lgmp’.
If the involved libraries are installed as dynamic libraries, it may be
sufficient to link with just ‘-lhogweed’, and the loader will resolve
the dependencies automatically.

   To the linker, all external symbols in the ‘libnettle’ and
‘libhogweed’ libraries are prefixed with ‘nettle_’ (or ‘_nettle_’ for
library internals).  This reduces the risk of link-time name collisions
with other libraries you want to link in the same program.  However, you
rarely see these prefixes, since header files define shorter
preprocessor aliases.  E.g., ‘nettle/sha2.h’, which declares
‘sha256_init’ among other functions, also includes a ‘#define
sha256_init nettle_sha256_init’.  You can used either name, but the
shorter names are recommended, and those are the ones used in this
documentation.


File: nettle.info,  Node: Compatibility,  Prev: Linking,  Up: Using Nettle

3.4 Compatibility
=================

When you write a program using the Nettle library, it's desirable to
have it work together not only with exactly the same version of Nettle
you had at hand, but with other current and future versions.  If a
different version of Nettle is used at compile time, i.e., you recompile
it using the header and library files belonging to a different version,
we talk about API compatibility (for Application Programming Interface).
If a different version of Nettle isn't used until link time, we talk
about ABI compatibility (Application Binary Interface) or binary
compatibility.  ABI compatibility matters mainly when using dynamic
linking with a shared library.  E.g., a user has an executable linking
at run-time with ‘libnettle.so’, and then updates to a later version of
the shared library, without updating or recompiling the executable.

   Nettle aims to provide backwards compatibility, i.e., a program
written for a particular version of the Nettle library should usually
work fine with later version of the library.  Note that the opposite is
not supported: The program should _not_ be expected to work with older
versions of the Nettle library; and ABI breakage can be unobvious.  E.g,
the later version may define a new library symbol, and let header files
redefine an old API name as an alias for the new symbol.  If the later
version ensures that the old symbol is still defined in the library,
this change is backwards compatible: A program compiled using headers
from the older version can be successfully linked with either version of
the library.  But if you compile the same program using headers from the
later version of the library, and attempt to link with the older
version, you'll get an undefined reference to the new symbol.

   API compatibility is rarely broken; exceptions are noted in the NEWS
file.  For example, the key size argument to the function
‘cast128_set_key’ was dropped in the Nettle-3.0 release, and all
programs using that function had to be updated to work with the new
version.

   ABI compatibility is broken occasionally.  This is also noted in the
NEWS file, and the name of the shared library is updated to prevent
accidental run-time linking with the wrong version.  All programs have
to be recompiled before they can link with the new version.  Since names
are different, multiple versions can be installed on the same system,
with a mix of programs linking to one version or the other.

   Under some circumstances, it is possible to have a single program
linking dynamically with two binary incompatible versions of the Nettle
library, thanks to the use of symbol versioning.  Consider a program
calling functions in both Nettle and GnuTLS. For the direct dependency
on Nettle, the program is linked with a particular version of the Nettle
shared library.  GnuTLS uses Nettle internally, but does not expose any
Nettle data structures or the like in its own ABI. In this situation,
the GnuTLS shared library may link with a different version of the
Nettle library.  Then both versions of the Nettle library will be loaded
into the program's address space, and each reference to a symbol will be
resolved to the correct version.

   Finally, some of Nettle's symbols are internal.  They carry a leading
underscore, and are not declared in installed header files.  They can be
used for local or experimental purposes, but programs referring directly
to those symbols get neither API nor ABI compatibility, not even between
minor versions.


File: nettle.info,  Node: Reference,  Next: Nettle soup,  Prev: Using Nettle,  Up: Top

4 Reference
***********

This chapter describes all the Nettle functions, grouped by family.

* Menu:

* Hash functions::
* Cipher functions::
* Cipher modes::
* Authenticated encryption::
* Keyed hash functions::
* Key derivation functions::
* Public-key algorithms::
* Randomness::
* ASCII encoding::
* Miscellaneous functions::


File: nettle.info,  Node: Hash functions,  Next: Cipher functions,  Up: Reference

4.1 Hash functions
==================

A cryptographic “hash function” is a function that takes variable size
strings, and maps them to strings of fixed, short, length.  There are
naturally lots of collisions, as there are more possible 1MB files than
20 byte strings.  But the function is constructed such that is hard to
find the collisions.  More precisely, a cryptographic hash function ‘H’
should have the following properties:

_One-way_
     Given a hash value ‘H(x)’ it is hard to find a string ‘x’ that
     hashes to that value.

_Collision-resistant_
     It is hard to find two different strings, ‘x’ and ‘y’, such that
     ‘H(x)’ = ‘H(y)’.

   Hash functions are useful as building blocks for digital signatures,
message authentication codes, pseudo random generators, association of
unique ids to documents, and many other things.

   The SHA1 hash function is still quite commonly used, even though it
fails the collision-resistance requirement; cryptologists have found
ways to construct colliding inputs.  The recommended hash functions for
new applications are SHA2 (with main variants SHA256 and SHA512) and
SHA3 (several variants, including SHA3-256, SHAKE256 and SHA3-512).

* Menu:

* Recommended hash functions::
* Miscellaneous hash functions::
* Legacy hash functions::
* nettle_hash abstraction::


File: nettle.info,  Node: Recommended hash functions,  Next: Miscellaneous hash functions,  Up: Hash functions

4.1.1 Recommended hash functions
--------------------------------

The following hash functions have no known weaknesses, and are suitable
for new applications.  The SHA2 family of hash functions were specified
by “NIST”, intended as a replacement for SHA1.

4.1.1.1 SHA256
..............

SHA256 is a member of the SHA2 family.  It outputs hash values of 256
bits, or 32 octets.  Nettle defines SHA256 in ‘<nettle/sha2.h>’.

 -- Context struct: struct sha256_ctx

 -- Constant: SHA256_DIGEST_SIZE
     The size of a SHA256 digest, i.e.  32.

 -- Constant: SHA256_BLOCK_SIZE
     The internal block size of SHA256.  Useful for some special
     constructions, in particular HMAC-SHA256.

 -- Function: void sha256_init (struct sha256_ctx *CTX)
     Initialize the SHA256 state.

 -- Function: void sha256_update (struct sha256_ctx *CTX, size_t LENGTH,
          const uint8_t *DATA)
     Hash some more data.

 -- Function: void sha256_digest (struct sha256_ctx *CTX, uint8_t
          *DIGEST)
     Performs final processing and extracts the message digest, writing
     ‘SHA256_DIGEST_SIZE’ octets to DIGEST.

     This function also resets the context in the same way as
     ‘sha256_init’.

 -- Function: void sha256_compress (const uint32_t *STATE, uint8_t
          *INPUT)
     Perform a raw SHA256 compress on SHA256_BLOCK_SIZE bytes fromINPUT
     using STATE as IV (an array of 8 uint32_t).  The output is stored
     in STATE.  This function provides access to the underlying
     compression function, for the rare applications that need that
     (e.g., using different IV from standard SHA256).

4.1.1.2 SHA224
..............

SHA224 is a variant of SHA256, with a different initial state, and with
the output truncated to 224 bits, or 28 octets.  Nettle defines SHA224
in ‘<nettle/sha2.h>’.

 -- Context struct: struct sha224_ctx

 -- Constant: SHA224_DIGEST_SIZE
     The size of a SHA224 digest, i.e.  28.

 -- Constant: SHA224_BLOCK_SIZE
     The internal block size of SHA224.  Useful for some special
     constructions, in particular HMAC-SHA224.

 -- Function: void sha224_init (struct sha224_ctx *CTX)
     Initialize the SHA224 state.

 -- Function: void sha224_update (struct sha224_ctx *CTX, size_t LENGTH,
          const uint8_t *DATA)
     Hash some more data.

 -- Function: void sha224_digest (struct sha224_ctx *CTX, uint8_t
          *DIGEST)
     Performs final processing and extracts the message digest, writing
     ‘SHA224_DIGEST_SIZE’ octets to DIGEST.

     This function also resets the context in the same way as
     ‘sha224_init’.

4.1.1.3 SHA512
..............

SHA512 is a larger sibling to SHA256, with a very similar structure but
with both the output and the internal variables of twice the size.  The
internal variables are 64 bits rather than 32, making it significantly
slower on 32-bit computers.  It outputs hash values of 512 bits, or 64
octets.  Nettle defines SHA512 in ‘<nettle/sha2.h>’.

 -- Context struct: struct sha512_ctx

 -- Constant: SHA512_DIGEST_SIZE
     The size of a SHA512 digest, i.e.  64.

 -- Constant: SHA512_BLOCK_SIZE
     The internal block size of SHA512, 128.  Useful for some special
     constructions, in particular HMAC-SHA512.

 -- Function: void sha512_init (struct sha512_ctx *CTX)
     Initialize the SHA512 state.

 -- Function: void sha512_update (struct sha512_ctx *CTX, size_t LENGTH,
          const uint8_t *DATA)
     Hash some more data.

 -- Function: void sha512_digest (struct sha512_ctx *CTX, uint8_t
          *DIGEST)
     Performs final processing and extracts the message digest, writing
     ‘SHA512_DIGEST_SIZE’ octets to DIGEST.

     This function also resets the context in the same way as
     ‘sha512_init’.

 -- Function: void sha512_compress (const uint64_t *STATE, uint8_t
          *INPUT)
     Perform a raw SHA512 compress on SHA512_BLOCK_SIZE bytes from INPUT
     using STATE as IV (an array of 8 uint64_t).  The output is stored
     in STATE.  This function provides access to the underlying
     compression function, for the rare applications that need that
     (e.g., using different IV from standard SHA512).

4.1.1.4 SHA384 and other variants of SHA512
...........................................

Several variants of SHA512 have been defined, with a different initial
state, and with the output truncated to shorter length than 512 bits.
Naming is a bit confused, these algorithms are called SHA512-224,
SHA512-256 and SHA384, for output sizes of 224, 256 and 384 bits,
respectively.  Nettle defines these in ‘<nettle/sha2.h>’.

 -- Context struct: struct sha512_224_ctx
 -- Context struct: struct sha512_256_ctx
 -- Context struct: struct sha384_ctx
     These context structs are all the same as sha512_ctx.  They are
     defined as simple preprocessor aliases, which may cause some
     problems if used as identifiers for other purposes.  So avoid doing
     that.

 -- Constant: SHA512_224_DIGEST_SIZE
 -- Constant: SHA512_256_DIGEST_SIZE
 -- Constant: SHA384_DIGEST_SIZE
     The digest size for each variant, i.e., 28, 32, and 48,
     respectively.

 -- Constant: SHA512_224_BLOCK_SIZE
 -- Constant: SHA512_256_BLOCK_SIZE
 -- Constant: SHA384_BLOCK_SIZE
     The internal block size, same as SHA512_BLOCK_SIZE, i.e., 128.
     Useful for some special constructions, in particular HMAC-SHA384.

 -- Function: void sha512_224_init (struct sha512_224_ctx *CTX)
 -- Function: void sha512_256_init (struct sha512_256_ctx *CTX)
 -- Function: void sha384_init (struct sha384_ctx *CTX)
     Initialize the context struct.

 -- Function: void sha512_224_update (struct sha512_224_ctx *CTX, size_t
          LENGTH, const uint8_t *DATA)
 -- Function: void sha512_256_update (struct sha512_256_ctx *CTX, size_t
          LENGTH, const uint8_t *DATA)
 -- Function: void sha384_update (struct sha384_ctx *CTX, size_t LENGTH,
          const uint8_t *DATA)
     Hash some more data.  These are all aliases for sha512_update,
     which does the same thing.

 -- Function: void sha512_224_digest (struct sha512_224_ctx *CTX,
          uint8_t *DIGEST)
 -- Function: void sha512_256_digest (struct sha512_256_ctx *CTX,
          uint8_t *DIGEST)
 -- Function: void sha384_digest (struct sha384_ctx *CTX, uint8_t
          *DIGEST)
     Performs final processing and extracts the message digest, writing
     a digest of the corresponding size to DIGEST.

     These function also reset the context in the same way as the
     corresponding init function.

4.1.1.5 SHA3
............

The SHA3 hash functions were specified by NIST in response to weaknesses
in SHA1, and doubts about SHA2 hash functions which structurally are
very similar to SHA1.  SHA3 is a result of a competition, where the
winner, also known as Keccak, was designed by Guido Bertoni, Joan
Daemen, Michaël Peeters and Gilles Van Assche.  It is structurally very
different from all widely used earlier hash functions.  Like SHA2, there
are several variants, with output sizes of 224, 256, 384 and 512 bits
(28, 32, 48 and 64 octets, respectively).  In August 2015, it was
formally standardized by NIST, as FIPS 202,
<https://dx.doi.org/10.6028/NIST.FIPS.202>.

   Nettle uses the same context struct for all SHA3-variants.
 -- Context struct: struct sha3_ctx

   The corresponding initialization function must be called before any
other of the sha3 functions.
 -- Function: void sha3_init (struct sha3_ctx *CTX)
     Initialize the SHA3 state.

   Notes on the SHA3 implementation in older versions of Nettle:
   • Prior to Nettle version 4.0, there were different context structs
     and initialization functions for each variant, e.g., ‘struct
     sha3_256_ctx’ and ‘sha3_256_init’.  For backwards compatibility,
     the old names are now defined as preprocessor aliases.

   • Prior to Nettle version 3.2, the SHA3 implementation was based on
     the specification at the time Keccak was announced as the winner of
     the competition, which is incompatible with the final standard and
     hence with current versions of Nettle.  The ‘nette/sha3.h’ defines
     a preprocessor symbol ‘NETTLE_SHA3_FIPS202’ to indicate conformance
     with the standard.

 -- Constant: NETTLE_SHA3_FIPS202
     Defined to 1 in Nettle versions supporting FIPS 202.  Undefined in
     earlier versions.

4.1.1.6 SHA3-224
................

This is SHA3 with 224-bit output size.  Nettle defines SHA3-224 in
‘<nettle/sha3.h>’.

 -- Constant: SHA3_224_DIGEST_SIZE
     The size of a SHA3_224 digest, i.e., 28.

 -- Constant: SHA3_224_BLOCK_SIZE
     The internal block size of SHA3_224.

 -- Function: void sha3_224_update (struct sha3_ctx *CTX, size_t LENGTH,
          const uint8_t *DATA)
     Hash some more data.

 -- Function: void sha3_224_digest (struct sha3_ctx *CTX, uint8_t
          *DIGEST)
     Performs final processing and extracts the message digest, writing
     ‘SHA3_224_DIGEST_SIZE’ octets to DIGEST.

     This function also resets the context.

4.1.1.7 SHA3-256
................

This is SHA3 with 256-bit output size, and possibly the most useful of
the SHA3 hash functions.  Nettle defines SHA3-256 in ‘<nettle/sha3.h>’.

 -- Constant: SHA3_256_DIGEST_SIZE
     The size of a SHA3_256 digest, i.e., 32.

 -- Constant: SHA3_256_BLOCK_SIZE
     The internal block size of SHA3_256.

 -- Function: void sha3_256_update (struct sha3_ctx *CTX, size_t LENGTH,
          const uint8_t *DATA)
     Hash some more data.

 -- Function: void sha3_256_digest (struct sha3_ctx *CTX, uint8_t
          *DIGEST)
     Performs final processing and extracts the message digest, writing
     ‘SHA3_256_DIGEST_SIZE’ octets to DIGEST.

     This function also resets the context.

4.1.1.8 SHA3-384
................

This is SHA3 with 384-bit output size.  Nettle defines SHA3-384 in
‘<nettle/sha3.h>’.

 -- Constant: SHA3_384_DIGEST_SIZE
     The size of a SHA3_384 digest, i.e., 48.

 -- Constant: SHA3_384_BLOCK_SIZE
     The internal block size of SHA3_384.

 -- Function: void sha3_384_update (struct sha3_ctx *CTX, size_t LENGTH,
          const uint8_t *DATA)
     Hash some more data.

 -- Function: void sha3_384_digest (struct sha3_ctx *CTX, uint8_t
          *DIGEST)
     Performs final processing and extracts the message digest, writing
     ‘SHA3_384_DIGEST_SIZE’ octets to DIGEST.

     This function also resets the context.

4.1.1.9 SHA3-512
................

This is SHA3 with 512-bit output size.  Nettle defines SHA3-512 in
‘<nettle/sha3.h>’.

 -- Constant: SHA3_512_DIGEST_SIZE
     The size of a SHA3_512 digest, i.e.  64.

 -- Constant: SHA3_512_BLOCK_SIZE
     The internal block size of SHA3_512.

 -- Function: void sha3_512_update (struct sha3_ctx *CTX, size_t LENGTH,
          const uint8_t *DATA)
     Hash some more data.

 -- Function: void sha3_512_digest (struct sha3_ctx *CTX, uint8_t
          *DIGEST)
     Performs final processing and extracts the message digest, writing
     ‘SHA3_512_DIGEST_SIZE’ octets to DIGEST.

     This function also resets the context.

4.1.1.10 SHAKE
..............

In addition to those SHA-3 hash functions, Nettle also supports a SHA-3
extendable-output function (XOF) called SHAKE. Unlike hash functions,
SHAKE can produce an output digest of any desired length.  There are two
variants, SHAKE-128 and SHAKE-256, with different security strengths in
terms of collision or preimage resistance: SHAKE-128 internally uses a
SHA-3 hash function with 128-bit security, while SHAKE-256 corresponds
to SHA3-256 which provides 256-bit security.

   To use SHAKE, the context struct needs to be initialized with the
‘init’ function and data is hashed using the ‘update’ function.
Afterwards, a digest can be generated using either the ‘shake’ or
‘shake_ouput’ function, where the former generates the digest at once
and resets the context, while the latter can be called multiple times to
generate the digest in an incremental manner.

   For SHAKE-128 they are defined as follows.

 -- Function: void sha3_128_update (struct sha3_ctx *CTX, size_t LENGTH,
          const uint8_t *DATA)
     Hash some more data.

 -- Function: void sha3_128_shake (struct sha3_ctx *CTX, size_t LENGTH,
          uint8_t *DIGEST)
     Performs final processing and produces a SHAKE-128 digest, writing
     it to DIGEST.  LENGTH can be of arbitrary size.

     This function also resets the context.

 -- Function: void sha3_128_shake_output (struct sha3_ctx *CTX, size_t
          LENGTH, uint8_t *DIGEST)
     Performs final processing and produces a SHAKE-128 digest, writing
     it to DIGEST.  LENGTH can be of arbitrary size.

     This function does not reset the context.

   For SHAKE-256, the ‘update’ function is the same as SHA3-256.  To
generate a digest, use either the ‘shake’ or ‘shake_output’ function.

 -- Function: void sha3_256_shake (struct sha3_ctx *CTX, size_t LENGTH,
          uint8_t *DIGEST)
     Performs final processing and produces a SHAKE-256 digest, writing
     it to DIGEST.  LENGTH can be of arbitrary size.

     This function also resets the context.

 -- Function: void sha3_256_shake_output (struct sha3_ctx *CTX, size_t
          LENGTH, uint8_t *DIGEST)
     Performs final processing and produces a SHAKE-256 digest, writing
     it to DIGEST.  LENGTH can be of arbitrary size.

     This function does not reset the context.


File: nettle.info,  Node: Miscellaneous hash functions,  Next: Legacy hash functions,  Prev: Recommended hash functions,  Up: Hash functions

4.1.2 Miscellaneous hash functions
----------------------------------

4.1.2.1 STREEBOG512
...................

STREEBOG512 is a member of the Streebog (GOST R 34.11-2012) family.  It
outputs hash values of 512 bits, or 64 octets.  Nettle defines
STREEBOG512 in ‘<nettle/streebog.h>’.

 -- Context struct: struct streebog512_ctx

 -- Constant: STREEBOG512_DIGEST_SIZE
     The size of a STREEBOG512 digest, i.e.  64.

 -- Constant: STREEBOG512_BLOCK_SIZE
     The internal block size of STREEBOG512.  Useful for some special
     constructions, in particular HMAC-STREEBOG512.

 -- Function: void streebog512_init (struct streebog512_ctx *CTX)
     Initialize the STREEBOG512 state.

 -- Function: void streebog512_update (struct streebog512_ctx *CTX,
          size_t LENGTH, const uint8_t *DATA)
     Hash some more data.

 -- Function: void streebog512_digest (struct streebog512_ctx *CTX,
          uint8_t *DIGEST)
     Performs final processing and extracts the message digest, writing
     ‘STREEBOG512_DIGEST_SIZE’ octets to DIGEST.

     This function also resets the context in the same way as
     ‘streebog512_init’.

4.1.2.2 STREEBOG256
...................

STREEBOG256 is a variant of STREEBOG512, with a different initial state,
and with the output truncated to 256 bits, or 32 octets.  Nettle defines
STREEBOG256 in ‘<nettle/streebog.h>’.

 -- Context struct: struct streebog256_ctx

 -- Constant: STREEBOG256_DIGEST_SIZE
     The size of a STREEBOG256 digest, i.e.  32.

 -- Constant: STREEBOG256_BLOCK_SIZE
     The internal block size of STREEBOG256.  Useful for some special
     constructions, in particular HMAC-STREEBOG256.

 -- Function: void streebog256_init (struct streebog256_ctx *CTX)
     Initialize the STREEBOG256 state.

 -- Function: void streebog256_update (struct streebog256_ctx *CTX,
          size_t LENGTH, const uint8_t *DATA)
     Hash some more data.

 -- Function: void streebog256_digest (struct streebog256_ctx *CTX,
          uint8_t *DIGEST)
     Performs final processing and extracts the message digest, writing
     ‘STREEBOG256_DIGEST_SIZE’ octets to DIGEST.

     This function also resets the context in the same way as
     ‘streebog256_init’.

4.1.2.3 SM3
...........

SM3 is a cryptographic hash function standard adopted by the government
of the People's Republic of China, which was issued by the Cryptography
Standardization Technical Committee of China on December 17, 2010.  The
corresponding standard is GM/T 0004-2012 "SM3 Cryptographic Hash
Algorithm".

   SM3 algorithm is a hash algorithm in ShangMi cryptosystems.  SM3 is
mainly used for digital signature and verification, message
authentication code generation and verification, random number
generation, and the RFC 8998 specification defines the usage of ShangMi
algorithm suite in TLS 1.3, etc.  According to the State Cryptography
Administration of China, its security and efficiency are equivalent to
SHA-256.

   Nettle defines SM3 in ‘<nettle/sm3.h>’.

 -- Context struct: struct sm3_ctx

 -- Constant: SM3_DIGEST_SIZE
     The size of a SM3 digest, i.e.  32.

 -- Constant: SM3_BLOCK_SIZE
     The internal block size of SM3.  Useful for some special
     constructions, in particular HMAC-SM3.

 -- Function: void sm3_init (struct sm3_ctx *CTX)
     Initialize the SM3 state.

 -- Function: void sm3_update (struct sm3_ctx *CTX, size_t LENGTH, const
          uint8_t *DATA)
     Hash some more data.

 -- Function: void sm3_digest (struct sm3_ctx *CTX, uint8_t *DIGEST)
     Performs final processing and extracts the message digest, writing
     ‘SM3_DIGEST_SIZE’ octets to DIGEST.

     This function also resets the context in the same way as
     ‘sm3_init’.


File: nettle.info,  Node: Legacy hash functions,  Next: nettle_hash abstraction,  Prev: Miscellaneous hash functions,  Up: Hash functions

4.1.3 Legacy hash functions
---------------------------

The hash functions in this section all have some known weaknesses, and
should be avoided for new applications.  These hash functions are mainly
useful for compatibility with old applications and protocols.  Some are
still considered safe as building blocks for particular constructions,
e.g., there seems to be no known attacks against HMAC-SHA1 or even
HMAC-MD5.  In some important cases, use of a "legacy" hash function does
not in itself make the application insecure; if a known weakness is
relevant depends on how the hash function is used, and on the threat
model.

4.1.3.1 MD5
...........

MD5 is a message digest function constructed by Ronald Rivest, and
described in ‘RFC 1321’.  It outputs message digests of 128 bits, or 16
octets.  Nettle defines MD5 in ‘<nettle/md5.h>’.

 -- Context struct: struct md5_ctx

 -- Constant: MD5_DIGEST_SIZE
     The size of an MD5 digest, i.e.  16.

 -- Constant: MD5_BLOCK_SIZE
     The internal block size of MD5.  Useful for some special
     constructions, in particular HMAC-MD5.

 -- Function: void md5_init (struct md5_ctx *CTX)
     Initialize the MD5 state.

 -- Function: void md5_update (struct md5_ctx *CTX, size_t LENGTH, const
          uint8_t *DATA)
     Hash some more data.

 -- Function: void md5_digest (struct md5_ctx *CTX, uint8_t *DIGEST)
     Performs final processing and extracts the message digest, writing
     ‘MD5_DIGEST_SIZE’ octets to DIGEST.

     This function also resets the context in the same way as
     ‘md5_init’.

 -- Function: void md5_compress (const uint32_t *STATE, uint8_t *INPUT)
     Perform a raw MD5 compress on MD5_BLOCK_SIZE bytes from INPUT using
     STATE as IV (an array of 4 uint32_t).  The output is stored in
     STATE.  This function provides access to the underlying compression
     function, for the rare applications that need that (e.g., using
     different IV from standard MD5).

   The normal way to use MD5 is to call the functions in order: First
‘md5_init’, then ‘md5_update’ zero or more times, and finally
‘md5_digest’.  After ‘md5_digest’, the context is reset to its initial
state, so you can start over calling ‘md5_update’ to hash new data.

   To start over, you can call ‘md5_init’ at any time.

4.1.3.2 MD2
...........

MD2 is another hash function of Ronald Rivest's, described in ‘RFC
1319’.  It outputs message digests of 128 bits, or 16 octets.  Nettle
defines MD2 in ‘<nettle/md2.h>’.

 -- Context struct: struct md2_ctx

 -- Constant: MD2_DIGEST_SIZE
     The size of an MD2 digest, i.e.  16.

 -- Constant: MD2_BLOCK_SIZE
     The internal block size of MD2.

 -- Function: void md2_init (struct md2_ctx *CTX)
     Initialize the MD2 state.

 -- Function: void md2_update (struct md2_ctx *CTX, size_t LENGTH, const
          uint8_t *DATA)
     Hash some more data.

 -- Function: void md2_digest (struct md2_ctx *CTX, uint8_t *DIGEST)
     Performs final processing and extracts the message digest, writing
     ‘MD2_DIGEST_SIZE’ octets to DIGEST.

     This function also resets the context in the same way as
     ‘md2_init’.

4.1.3.3 MD4
...........

MD4 is a predecessor of MD5, described in ‘RFC 1320’.  Like MD5, it is
constructed by Ronald Rivest.  It outputs message digests of 128 bits,
or 16 octets.  Nettle defines MD4 in ‘<nettle/md4.h>’.  Use of MD4 is
not recommended, but it is sometimes needed for compatibility with
existing applications and protocols.

 -- Context struct: struct md4_ctx

 -- Constant: MD4_DIGEST_SIZE
     The size of an MD4 digest, i.e.  16.

 -- Constant: MD4_BLOCK_SIZE
     The internal block size of MD4.

 -- Function: void md4_init (struct md4_ctx *CTX)
     Initialize the MD4 state.

 -- Function: void md4_update (struct md4_ctx *CTX, size_t LENGTH, const
          uint8_t *DATA)
     Hash some more data.

 -- Function: void md4_digest (struct md4_ctx *CTX, uint8_t *DIGEST)
     Performs final processing and extracts the message digest, writing
     ‘MD4_DIGEST_SIZE’ octets to DIGEST.

     This function also resets the context in the same way as
     ‘md4_init’.

4.1.3.4 RIPEMD160
.................

RIPEMD160 is a hash function designed by Hans Dobbertin, Antoon
Bosselaers, and Bart Preneel, as a strengthened version of RIPEMD
(which, like MD4 and MD5, fails the collision-resistance requirement).
It produces message digests of 160 bits, or 20 octets.  Nettle defined
RIPEMD160 in ‘nettle/ripemd160.h’.

 -- Context struct: struct ripemd160_ctx

 -- Constant: RIPEMD160_DIGEST_SIZE
     The size of a RIPEMD160 digest, i.e.  20.

 -- Constant: RIPEMD160_BLOCK_SIZE
     The internal block size of RIPEMD160.

 -- Function: void ripemd160_init (struct ripemd160_ctx *CTX)
     Initialize the RIPEMD160 state.

 -- Function: void ripemd160_update (struct ripemd160_ctx *CTX, size_t
          LENGTH, const uint8_t *DATA)
     Hash some more data.

 -- Function: void ripemd160_digest (struct ripemd160_ctx *CTX, uint8_t
          *DIGEST)
     Performs final processing and extracts the message digest, writing
     ‘RIPEMD160_DIGEST_SIZE’ octets to DIGEST.

     This function also resets the context in the same way as
     ‘ripemd160_init’.

4.1.3.5 SHA1
............

SHA1 is a hash function specified by “NIST” (The U.S. National Institute
for Standards and Technology).  It outputs hash values of 160 bits, or
20 octets.  Nettle defines SHA1 in ‘<nettle/sha1.h>’.

 -- Context struct: struct sha1_ctx

 -- Constant: SHA1_DIGEST_SIZE
     The size of a SHA1 digest, i.e.  20.

 -- Constant: SHA1_BLOCK_SIZE
     The internal block size of SHA1.  Useful for some special
     constructions, in particular HMAC-SHA1.

 -- Function: void sha1_init (struct sha1_ctx *CTX)
     Initialize the SHA1 state.

 -- Function: void sha1_update (struct sha1_ctx *CTX, size_t LENGTH,
          const uint8_t *DATA)
     Hash some more data.

 -- Function: void sha1_digest (struct sha1_ctx *CTX, uint8_t *DIGEST)
     Performs final processing and extracts the message digest, writing
     ‘SHA1_DIGEST_SIZE’ octets to DIGEST.

     This function also resets the context in the same way as
     ‘sha1_init’.

 -- Function: void sha1_compress (const uint32_t *STATE, uint8_t *INPUT)
     Perform a raw SHA1 compress on SHA1_BLOCK_SIZE bytes from INPUT
     using STATE as IV (an array of 5 uint32_t).  The output is stored
     in STATE.  This function provides access to the underlying
     compression function, for the rare applications that need that
     (e.g., using different IV from standard SHA1).

4.1.3.6 GOSTHASH94 and GOSTHASH94CP
...................................

The GOST94 or GOST R 34.11-94 hash algorithm is a Soviet-era algorithm
used in Russian government standards (see ‘RFC 4357’).  It outputs
message digests of 256 bits, or 32 octets.  The standard itself does not
fix the S-box used by the hash algorith, so there are two popular
variants (the testing S-box from the standard itself and the S-box
defined by CryptoPro company, see RFC 4357).  Nettle provides support
for the former S-box in the form of GOSTHASH94 hash algorithm and for
the latter in the form of GOSTHASH94CP hash algorithm.  Nettle defines
GOSTHASH94 and GOSTHASH94CP in ‘<nettle/gosthash94.h>’.

 -- Context struct: struct gosthash94_ctx

 -- Constant: GOSTHASH94_DIGEST_SIZE
     The size of a GOSTHASH94 digest, i.e.  32.

 -- Constant: GOSTHASH94_BLOCK_SIZE
     The internal block size of GOSTHASH94, i.e., 32.

 -- Function: void gosthash94_init (struct gosthash94_ctx *CTX)
     Initialize the GOSTHASH94 state.

 -- Function: void gosthash94_update (struct gosthash94_ctx *CTX, size_t
          LENGTH, const uint8_t *DATA)
     Hash some more data.

 -- Function: void gosthash94_digest (struct gosthash94_ctx *CTX,
          uint8_t *DIGEST)
     Performs final processing and extracts the message digest, writing
     ‘GOSTHASH94_DIGEST_SIZE’ octets to DIGEST.

     This function also resets the context in the same way as
     ‘gosthash94_init’.

 -- Context struct: struct gosthash94cp_ctx

 -- Constant: GOSTHASH94CP_DIGEST_SIZE
     The size of a GOSTHASH94CP digest, i.e.  32.

 -- Constant: GOSTHASH94CP_BLOCK_SIZE
     The internal block size of GOSTHASH94CP, i.e., 32.

 -- Function: void gosthash94cp_init (struct gosthash94cp_ctx *CTX)
     Initialize the GOSTHASH94CP state.

 -- Function: void gosthash94cp_update (struct gosthash94cp_ctx *CTX,
          size_t LENGTH, const uint8_t *DATA)
     Hash some more data.

 -- Function: void gosthash94cp_digest (struct gosthash94cp_ctx *CTX,
          uint8_t *DIGEST)
     Performs final processing and extracts the message digest, writing
     ‘GOSTHASH94CP_DIGEST_SIZE’ octets to DIGEST.

     This function also resets the context in the same way as
     ‘gosthash94cp_init’.


File: nettle.info,  Node: nettle_hash abstraction,  Prev: Legacy hash functions,  Up: Hash functions

4.1.4 The ‘struct nettle_hash’ abstraction
------------------------------------------

Nettle includes a struct including information about the supported hash
functions.  It is defined in ‘<nettle/nettle-meta.h>’, and is used by
Nettle's implementation of HMAC (*note Keyed hash functions::).

 -- Meta struct: struct nettle_hash name context_size digest_size
          block_size init update digest
     The last three attributes are function pointers, of types
     ‘nettle_hash_init_func *’, ‘nettle_hash_update_func *’, and
     ‘nettle_hash_digest_func *’.  The first argument to these functions
     is ‘void *’ pointer to a context struct, which is of size
     ‘context_size’.

 -- Constant Struct: struct nettle_hash nettle_md2
 -- Constant Struct: struct nettle_hash nettle_md4
 -- Constant Struct: struct nettle_hash nettle_md5
 -- Constant Struct: struct nettle_hash nettle_ripemd160
 -- Constant Struct: struct nettle_hash nettle_sha1
 -- Constant Struct: struct nettle_hash nettle_sha224
 -- Constant Struct: struct nettle_hash nettle_sha256
 -- Constant Struct: struct nettle_hash nettle_sha384
 -- Constant Struct: struct nettle_hash nettle_sha512
 -- Constant Struct: struct nettle_hash nettle_sha3_256
 -- Constant Struct: struct nettle_hash nettle_gosthash94
 -- Constant Struct: struct nettle_hash nettle_gosthash94cp
 -- Constant Struct: struct nettle_hash nettle_sm3
     These are all the hash functions that Nettle implements.

   Nettle also exports a list of all these hashes.

 -- Function: const struct nettle_hash ** nettle_get_hashes (void)
     Returns a NULL-terminated list of pointers to supported hash
     functions.  This list can be used to dynamically enumerate or
     search the supported algorithms.

 -- Macro: nettle_hashes
     A macro expanding to a call to nettle_get_hashes, so that one could
     write, e.g., ‘nettle_hashes[0]->name’ for the name of the first
     hash function on the list.  In earlier versions, this was not a
     macro but the actual array of pointers.  However, referring
     directly to the array makes the array size leak into the ABI in
     some cases.


File: nettle.info,  Node: Cipher functions,  Next: Cipher modes,  Prev: Hash functions,  Up: Reference

4.2 Cipher functions
====================

A “cipher” is a function that takes a message or “plaintext” and a
secret “key” and transforms it to a “ciphertext”.  Given only the
ciphertext, but not the key, it should be hard to find the plaintext.
Given matching pairs of plaintext and ciphertext, it should be hard to
find the key.

   There are two main classes of ciphers: Block ciphers and stream
ciphers.

   A block cipher can process data only in fixed size chunks, called
“blocks”.  Typical block sizes are 8 or 16 octets.  To encrypt arbitrary
messages, you usually have to pad it to an integral number of blocks,
split it into blocks, and then process each block.  The simplest way is
to process one block at a time, independent of each other.  That mode of
operation is called “ECB”, Electronic Code Book mode.  However, using
ECB is usually a bad idea.  For a start, plaintext blocks that are equal
are transformed to ciphertext blocks that are equal; that leaks
information about the plaintext.  Usually you should apply the cipher is
some "feedback mode", “CBC” (Cipher Block Chaining) and “CTR” (Counter
mode) being two of of the most popular.  See *Note Cipher modes::, for
information on how to apply CBC and CTR with Nettle.

   A stream cipher can be used for messages of arbitrary length.  A
typical stream cipher is a keyed pseudo-random generator.  To encrypt a
plaintext message of N octets, you key the generator, generate N octets
of pseudo-random data, and XOR it with the plaintext.  To decrypt,
regenerate the same stream using the key, XOR it to the ciphertext, and
the plaintext is recovered.

   *Caution:* The first rule for this kind of cipher is the same as for
a One Time Pad: _never_ ever use the same key twice.

   A common misconception is that encryption, by itself, implies
authentication.  Say that you and a friend share a secret key, and you
receive an encrypted message.  You apply the key, and get a plaintext
message that makes sense to you.  Can you then be sure that it really
was your friend that wrote the message you're reading?  The answer is
no.  For example, if you were using a block cipher in ECB mode, an
attacker may pick up the message on its way, and reorder, delete or
repeat some of the blocks.  Even if the attacker can't decrypt the
message, he can change it so that you are not reading the same message
as your friend wrote.  If you are using a block cipher in CBC mode
rather than ECB, or are using a stream cipher, the possibilities for
this sort of attack are different, but the attacker can still make
predictable changes to the message.

   It is recommended to _always_ use an authentication mechanism in
addition to encrypting the messages.  Popular choices are Message
Authentication Codes like HMAC-SHA1 (*note Keyed hash functions::), or
digital signatures like RSA.

   Some ciphers have so called "weak keys", keys that results in
undesirable structure after the key setup processing, and should be
avoided.  In Nettle, most key setup functions have no return value, but
for ciphers with weak keys, the return value indicates whether or not
the given key is weak.  For good keys, key setup returns 1, and for weak
keys, it returns 0.  When possible, avoid algorithms that have weak
keys.  There are several good ciphers that don't have any weak keys.

   To encrypt a message, you first initialize a cipher context for
encryption or decryption with a particular key.  You then use the
context to process plaintext or ciphertext messages.  The initialization
is known as “key setup”.  With Nettle, it is recommended to use each
context struct for only one direction, even if some of the ciphers use a
single key setup function that can be used for both encryption and
decryption.

* Menu:

* AES::
* Arcfour::
* Arctwo::
* Blowfish::
* Camellia::
* CAST128::
* ChaCha::
* DES::
* DES3::
* Salsa20::
* Serpent::
* SM4::
* Twofish::
* nettle_cipher abstraction::


File: nettle.info,  Node: AES,  Next: Arcfour,  Up: Cipher functions

4.2.1 AES
---------

AES is a block cipher, specified by NIST as a replacement for the older
DES standard.  The standard is the result of a competition between
cipher designers.  The winning design, also known as RIJNDAEL, was
constructed by Joan Daemen and Vincent Rijnmen.

   Like all the AES candidates, the winning design uses a block size of
128 bits, or 16 octets, and three possible key-size, 128, 192 and 256
bits (16, 24 and 32 octets) being the allowed key sizes.  It does not
have any weak keys.  Nettle defines AES in ‘<nettle/aes.h>’, and there
is one context struct for each key size.

 -- Context struct: struct aes128_ctx
 -- Context struct: struct aes192_ctx
 -- Context struct: struct aes256_ctx

 -- Constant: AES_BLOCK_SIZE
     The AES block-size, 16.

 -- Constant: AES128_KEY_SIZE
 -- Constant: AES192_KEY_SIZE
 -- Constant: AES256_KEY_SIZE

 -- Constant: AES_KEY_SIZE
     Default AES key size, 32.

 -- Function: void aes128_set_encrypt_key (struct aes128_ctx *CTX, const
          uint8_t *KEY)
 -- Function: void aes128_set_decrypt_key (struct aes128_ctx *CTX, const
          uint8_t *KEY)
 -- Function: void aes192_set_encrypt_key (struct aes192_ctx *CTX, const
          uint8_t *KEY)
 -- Function: void aes192_set_decrypt_key (struct aes192_ctx *CTX, const
          uint8_t *KEY)
 -- Function: void aes256_set_encrypt_key (struct aes256_ctx *CTX, const
          uint8_t *KEY)
 -- Function: void aes256_set_decrypt_key (struct aes256_ctx *CTX, const
          uint8_t *KEY)
     Initialize the cipher, for encryption or decryption, respectively.

 -- Function: void aes128_invert_key (struct aes128_ctx *DST, const
          struct aes128_ctx *SRC)
 -- Function: void aes192_invert_key (struct aes192_ctx *DST, const
          struct aes192_ctx *SRC)
 -- Function: void aes256_invert_key (struct aes256_ctx *DST, const
          struct aes256_ctx *SRC)
     Given a context SRC initialized for encryption, initializes the
     context struct DST for decryption, using the same key.  If the same
     context struct is passed for both ‘src’ and ‘dst’, it is converted
     in place.  These functions are mainly useful for applications which
     needs to both encrypt and decrypt using the _same_ key, because
     calling, e.g., ‘aes128_set_encrypt_key’ and ‘aes128_invert_key’, is
     more efficient than calling ‘aes128_set_encrypt_key’ and
     ‘aes128_set_decrypt_key’.

 -- Function: void aes128_encrypt (struct aes128_ctx *CTX, size_t
          LENGTH, uint8_t *DST, const uint8_t *SRC)
 -- Function: void aes192_encrypt (struct aes192_ctx *CTX, size_t
          LENGTH, uint8_t *DST, const uint8_t *SRC)
 -- Function: void aes256_encrypt (struct aes256_ctx *CTX, size_t
          LENGTH, uint8_t *DST, const uint8_t *SRC)
     Encryption function.  LENGTH must be an integral multiple of the
     block size.  If it is more than one block, the data is processed in
     ECB mode.  ‘src’ and ‘dst’ may be equal, but they must not overlap
     in any other way.

 -- Function: void aes128_decrypt (struct aes128_ctx *CTX, size_t
          LENGTH, uint8_t *DST, const uint8_t *SRC)
 -- Function: void aes192_decrypt (struct aes192_ctx *CTX, size_t
          LENGTH, uint8_t *DST, const uint8_t *SRC)
 -- Function: void aes256_decrypt (struct aes256_ctx *CTX, size_t
          LENGTH, uint8_t *DST, const uint8_t *SRC)
     Analogous to the encryption functions above.


File: nettle.info,  Node: Arcfour,  Next: Arctwo,  Prev: AES,  Up: Cipher functions

4.2.2 Arcfour
-------------

ARCFOUR is a historic stream cipher, also known under the trade marked
name RC4, and was a widely used fast stream cipher.

   We do not recommend the use of ARCFOUR; the Nettle implementation is
provided primarily for interoperability with existing applications and
standards.

   One problem is that the key setup of ARCFOUR is quite weak, you
should never use keys with structure, keys that are ordinary passwords,
or sequences of keys like "secret:1", "secret:2", ....  If you have keys
that don't look like random bit strings, and you want to use ARCFOUR,
always hash the key before feeding it to ARCFOUR.

   Another problem is that the output is distinguishable from random
data, and that the initial bytes of the generated key stream leak
information about the key; for this reason, it was sometimes recommended
to discard the first 512, 768 or 1024 bytes of the key stream.

     /* A more robust key setup function for ARCFOUR */
     void
     arcfour_set_key_hashed(struct arcfour_ctx *ctx,
                            size_t length, const uint8_t *key)
     {
       struct sha256_ctx hash;
       uint8_t digest[SHA256_DIGEST_SIZE];
       uint8_t buffer[0x200];

       sha256_init(&hash);
       sha256_update(&hash, length, key);
       sha256_digest(&hash, digest);

       arcfour_set_key(ctx, SHA256_DIGEST_SIZE, digest);
       arcfour_crypt(ctx, sizeof(buffer), buffer, buffer);
     }

   Nettle defines ARCFOUR in ‘<nettle/arcfour.h>’.

 -- Context struct: struct arcfour_ctx

 -- Constant: ARCFOUR_MIN_KEY_SIZE
     Minimum key size, 1.

 -- Constant: ARCFOUR_MAX_KEY_SIZE
     Maximum key size, 256.

 -- Constant: ARCFOUR_KEY_SIZE
     Default ARCFOUR key size, 16.

 -- Function: void arcfour_set_key (struct arcfour_ctx *CTX, size_t
          LENGTH, const uint8_t *KEY)
     Initialize the cipher.  The same function is used for both
     encryption and decryption.

 -- Function: void arcfour_crypt (struct arcfour_ctx *CTX, size_t
          LENGTH, uint8_t *DST, const uint8_t *SRC)
     Encrypt some data.  The same function is used for both encryption
     and decryption.  Unlike the block ciphers, this function modifies
     the context, so you can split the data into arbitrary chunks and
     encrypt them one after another.  The result is the same as if you
     had called ‘arcfour_crypt’ only once with all the data.


File: nettle.info,  Node: Arctwo,  Next: Blowfish,  Prev: Arcfour,  Up: Cipher functions

4.2.3 Arctwo
------------

ARCTWO (also known as the trade marked name RC2) is a block cipher
specified in RFC 2268.  Nettle also include a variation of the ARCTWO
set key operation that lack one step, to be compatible with the reverse
engineered RC2 cipher description, as described in a Usenet post to
‘sci.crypt’ by Peter Gutmann.

   ARCTWO uses a block size of 64 bits, and variable key-size ranging
from 1 to 128 octets.  Besides the key, ARCTWO also has a second
parameter to key setup, the number of effective key bits, ‘ekb’.  This
parameter can be used to artificially reduce the key size.  In practice,
‘ekb’ is usually set equal to the input key size.  Nettle defines ARCTWO
in ‘<nettle/arctwo.h>’.

   We do not recommend the use of ARCTWO; the Nettle implementation is
provided primarily for interoperability with existing applications and
standards.

 -- Context struct: struct arctwo_ctx

 -- Constant: ARCTWO_BLOCK_SIZE
     The ARCTWO block-size, 8.

 -- Constant: ARCTWO_MIN_KEY_SIZE

 -- Constant: ARCTWO_MAX_KEY_SIZE

 -- Constant: ARCTWO_KEY_SIZE
     Default ARCTWO key size, 8.

 -- Function: void arctwo_set_key_ekb (struct arctwo_ctx *CTX, size_t
          LENGTH, const uint8_t *KEY, unsigned EKB)
 -- Function: void arctwo_set_key (struct arctwo_ctx *CTX, size_t
          LENGTH, const uint8_t *KEY)
 -- Function: void arctwo_set_key_gutmann (struct arctwo_ctx *CTX,
          size_t LENGTH, const uint8_t *KEY)
     Initialize the cipher.  The same function is used for both
     encryption and decryption.  The first function is the most general
     one, which lets you provide both the variable size key, and the
     desired effective key size (in bits).  The maximum value for EKB is
     1024, and for convenience, ‘ekb = 0’ has the same effect as ‘ekb =
     1024’.

     ‘arctwo_set_key(ctx, length, key)’ is equivalent to
     ‘arctwo_set_key_ekb(ctx, length, key, 8*length)’, and
     ‘arctwo_set_key_gutmann(ctx, length, key)’ is equivalent to
     ‘arctwo_set_key_ekb(ctx, length, key, 1024)’

 -- Function: void arctwo_encrypt (struct arctwo_ctx *CTX, size_t
          LENGTH, uint8_t *DST, const uint8_t *SRC)
     Encryption function.  LENGTH must be an integral multiple of the
     block size.  If it is more than one block, the data is processed in
     ECB mode.  ‘src’ and ‘dst’ may be equal, but they must not overlap
     in any other way.

 -- Function: void arctwo_decrypt (struct arctwo_ctx *CTX, size_t
          LENGTH, uint8_t *DST, const uint8_t *SRC)
     Analogous to ‘arctwo_encrypt’


File: nettle.info,  Node: Blowfish,  Next: Camellia,  Prev: Arctwo,  Up: Cipher functions

4.2.4 Blowfish
--------------

BLOWFISH is a block cipher designed by Bruce Schneier.  It uses a block
size of 64 bits (8 octets), and a variable key size, up to 448 bits.  It
has some weak keys.  Nettle defines BLOWFISH in ‘<nettle/blowfish.h>’.

 -- Context struct: struct blowfish_ctx

 -- Constant: BLOWFISH_BLOCK_SIZE
     The BLOWFISH block-size, 8.

 -- Constant: BLOWFISH_MIN_KEY_SIZE
     Minimum BLOWFISH key size, 8.

 -- Constant: BLOWFISH_MAX_KEY_SIZE
     Maximum BLOWFISH key size, 56.

 -- Constant: BLOWFISH_KEY_SIZE
     Default BLOWFISH key size, 16.

 -- Function: int blowfish_set_key (struct blowfish_ctx *CTX, size_t
          LENGTH, const uint8_t *KEY)
     Initialize the cipher.  The same function is used for both
     encryption and decryption.  Checks for weak keys, returning 1 for
     good keys and 0 for weak keys.  Applications that don't care about
     weak keys can ignore the return value.

     ‘blowfish_encrypt’ or ‘blowfish_decrypt’ with a weak key will crash
     with an assert violation.

 -- Function: void blowfish_encrypt (struct blowfish_ctx *CTX, size_t
          LENGTH, uint8_t *DST, const uint8_t *SRC)
     Encryption function.  LENGTH must be an integral multiple of the
     block size.  If it is more than one block, the data is processed in
     ECB mode.  ‘src’ and ‘dst’ may be equal, but they must not overlap
     in any other way.

 -- Function: void blowfish_decrypt (struct blowfish_ctx *CTX, size_t
          LENGTH, uint8_t *DST, const uint8_t *SRC)
     Analogous to ‘blowfish_encrypt’

 -- Function: int blowfish_bcrypt_hash (char *DST, size_t LENKEY, const
          char *KEY, size_t LENSCHEME, const char *SCHEME, int
          LOG2ROUNDS, const uint8_t *SALT)
     Compute the bcrypt password hash.  The function will return ‘0’ if
     the hash cannot be computed due to invalid input.  The function
     will return ‘1’ and store the computed hash in the array pointed to
     by DST.  The hash is computed based on the chosen SCHEME, number of
     rounds LOG2ROUNDS and specified SALT.

     DST must point to a character array of at least
     ‘BLOWFISH_BCRYPT_HASH_SIZE’ bytes.

     KEY contains the plaintext password string of size LENKEY.

     SCHEME is of size LENSCHEME and contains either just the chosen
     scheme (valid schemes are: ‘2a’, ‘2b’, ‘2x’ or ‘2y’), or (the
     prefix of) an existing hashed password (typically ‘$2b$10$...’).

     LOG2ROUNDS contains the log2 of the number of encryption rounds
     that must be used to compute the hash.  If it is ‘-1’ the value
     will be extracted from SCHEME.

     SALT should point to an array of ‘BLOWFISH_BCRYPT_BINSALT_SIZE’
     random bytes to be used to perturb the hash computation.  If it is
     ‘NULL’ the salt will be extracted from SCHEME.

     Sample code to generate a bcrypt hash:
          char password[] = "ExamplePassword";
          char scheme[] = "2b";
          uint8_t salt[BLOWFISH_BCRYPT_BINSALT_SIZE];
          ...
          /* Make sure that salt is filled with random bytes */
          ...
          char hash[BLOWFISH_BCRYPT_HASH_SIZE];
          int result = blowfish_bcrypt(hash,
                                       sizeof(password) - 1, password,
                                       sizeof(scheme) - 1, scheme, 10, salt);
          if (result)
            printf("%s\n", hash);

 -- Function: int blowfish_bcrypt_verify (size_t LENKEY, const char
          *KEY, size_t LENHASHED, const char *HASHED)
     Verifies the bcrypt password hash against the supplied plaintext
     password.  The function will return ‘0’ if the password does not
     match.  The function will return ‘1’ if the password matches.

     KEY contains the plaintext password string of size LENKEY.

     HASHED contains the hashed string of size LENHASHED to compare
     with.

     Sample code to verify a bcrypt hash:
          char password[] = "ExamplePassword";
          char hash[] =
            "$2y$"  /* Hash algorithm version */
            "10"   /* 2^10 hash rounds (strength) */
            "$"   /* separator */
            "1b2lPgo4XumibnJGN3r3sO" /* base64 encoded 16-byte salt */
            "u7wE7xNfYDKlAxZffJDCJdVfFTAyevu"; /* Hashedpart */
          if (blowfish_bcrypt_verify(sizeof(password) - 1, password,
                                     sizeof(hash) - 1, hash))
            printf("Password is correct.");
          else
            printf("Password is incorrect.");


File: nettle.info,  Node: Camellia,  Next: CAST128,  Prev: Blowfish,  Up: Cipher functions

4.2.5 Camellia
--------------

Camellia is a block cipher developed by Mitsubishi and Nippon Telegraph
and Telephone Corporation, described in ‘RFC3713’.  It is recommended by
some Japanese and European authorities as an alternative to AES, and it
is one of the selected algorithms in the New European Schemes for
Signatures, Integrity and Encryption (NESSIE) project.  The algorithm is
patented.  The implementation in Nettle is derived from the
implementation released by NTT under the GNU LGPL (v2.1 or later), and
relies on the implicit patent license of the LGPL. There is also a
statement of royalty-free licensing for Camellia at
<https://www.ntt.co.jp/news/news01e/0104/010417.html>, but this
statement has some limitations which seem problematic for free software.

   Camellia uses a the same block size and key sizes as AES: The block
size is 128 bits (16 octets), and the supported key sizes are 128, 192,
and 256 bits.  The variants with 192 and 256 bit keys are identical,
except for the key setup.  Nettle defines Camellia in
‘<nettle/camellia.h>’, and there is one context struct for each key
size.  (Earlier versions of Nettle used a single context struct, ‘struct
camellia_ctx’, for all key sizes.  This interface kept for backwards
compatibility).

 -- Context struct: struct camellia128_ctx
 -- Context struct: struct camellia192_ctx
 -- Context struct: struct camellia256_ctx
     Contexts structs.  Actually, ‘camellia192_ctx’ is an alias for
     ‘camellia256_ctx’.

 -- Context struct: struct camellia_ctx
     Alternative struct, for the old Camellia interface.

 -- Constant: CAMELLIA_BLOCK_SIZE
     The CAMELLIA block-size, 16.

 -- Constant: CAMELLIA128_KEY_SIZE
 -- Constant: CAMELLIA192_KEY_SIZE
 -- Constant: CAMELLIA256_KEY_SIZE
 -- Constant: CAMELLIA_MIN_KEY_SIZE
 -- Constant: CAMELLIA_MAX_KEY_SIZE

 -- Constant: CAMELLIA_KEY_SIZE
     Default CAMELLIA key size, 32.

 -- Function: void camellia128_set_encrypt_key (struct camellia128_ctx
          *CTX, const uint8_t *KEY)
 -- Function: void camellia128_set_decrypt_key (struct camellia128_ctx
          *CTX, const uint8_t *KEY)
 -- Function: void camellia192_set_encrypt_key (struct camellia192_ctx
          *CTX, const uint8_t *KEY)
 -- Function: void camellia192_set_decrypt_key (struct camellia192_ctx
          *CTX, const uint8_t *KEY)
 -- Function: void camellia256_set_encrypt_key (struct camellia256_ctx
          *CTX, const uint8_t *KEY)
 -- Function: void camellia256_set_decrypt_key (struct camellia256_ctx
          *CTX, const uint8_t *KEY)
 -- Function: void camellia_set_encrypt_key (struct camellia_ctx *CTX,
          size_t LENGTH, const uint8_t *KEY)
 -- Function: void camellia_set_decrypt_key (struct camellia_ctx *CTX,
          size_t LENGTH, const uint8_t *KEY)
     Initialize the cipher, for encryption or decryption, respectively.

 -- Function: void camellia128_invert_key (struct camellia128_ctx *DST,
          const struct camellia128_ctx *SRC)
 -- Function: void camellia192_invert_key (struct camellia192_ctx *DST,
          const struct camellia192_ctx *SRC)
 -- Function: void camellia256_invert_key (struct camellia256_ctx *DST,
          const struct camellia256_ctx *SRC)
 -- Function: void camellia_invert_key (struct camellia_ctx *DST, const
          struct camellia_ctx *SRC)
     Given a context SRC initialized for encryption, initializes the
     context struct DST for decryption, using the same key.  If the same
     context struct is passed for both ‘src’ and ‘dst’, it is converted
     in place.  These functions are mainly useful for applications which
     needs to both encrypt and decrypt using the _same_ key.

 -- Function: void camellia128_crypt (struct camellia128_ctx *CTX,
          size_t LENGTH, uint8_t *DST, const uint8_t *SRC)
 -- Function: void camellia192_crypt (struct camellia192_ctx *CTX,
          size_t LENGTH, uint8_t *DST, const uint8_t *SRC)
 -- Function: void camellia256_crypt (struct camellia256_ctx *CTX,
          size_t LENGTH, uint8_t *DST, const uint8_t *SRC)
 -- Function: void camellia_crypt (struct camellia_ctx *CTX, size_t
          LENGTH, uint8_t *DST, const uint8_t *SRC)
     The same function is used for both encryption and decryption.
     LENGTH must be an integral multiple of the block size.  If it is
     more than one block, the data is processed in ECB mode.  ‘src’ and
     ‘dst’ may be equal, but they must not overlap in any other way.


File: nettle.info,  Node: CAST128,  Next: ChaCha,  Prev: Camellia,  Up: Cipher functions

4.2.6 CAST128
-------------

CAST-128 is a block cipher, specified in ‘RFC 2144’.  It uses a 64 bit
(8 octets) block size, and a key size of 128 bits.  It is possible, but
discouraged, to use the same algorithm with shorter keys.  Nettle refers
to the variant with variable key size as CAST-5.  Keys for CAST-5 are
zero padded to 128 bits, and with very short keys, less than 80 bits,
encryption also uses fewer rounds than CAST128.  Nettle defines cast128
in ‘<nettle/cast128.h>’.

 -- Context struct: struct cast128_ctx

 -- Constant: CAST128_BLOCK_SIZE
     The CAST128 block-size, 8.

 -- Constant: CAST128_KEY_SIZE
     The CAST128 key size, 16.

 -- Constant: CAST5_MIN_KEY_SIZE
     Minimum CAST5 key size, 5.

 -- Constant: CAST5_MAX_KEY_SIZE
     Maximum CAST5 key size, 16.  With 16 octets key (128 bits), CAST-5
     is the same as CAST-128.

 -- Function: void cast128_set_key (struct cast128_ctx *CTX, const
          uint8_t *KEY)
     Initialize the cipher.  The same function is used for both
     encryption and decryption.

 -- Function: void cast128_encrypt (struct cast128_ctx *CTX, size_t
          LENGTH, uint8_t *DST, const uint8_t *SRC)
     Encryption function.  LENGTH must be an integral multiple of the
     block size.  If it is more than one block, the data is processed in
     ECB mode.  ‘src’ and ‘dst’ may be equal, but they must not overlap
     in any other way.

 -- Function: void cast128_decrypt (struct cast128_ctx *CTX, size_t
          LENGTH, uint8_t *DST, const uint8_t *SRC)
     Analogous to ‘cast128_encrypt’

 -- Function: void cast5_set_key (struct cast128_ctx *CTX, size_t
          LENGTH, const uint8_t *KEY)
     Initialize the cipher.  This variant of the key setup takes the key
     size as argument.  The same function is used for both encryption
     and decryption.


File: nettle.info,  Node: ChaCha,  Next: DES,  Prev: CAST128,  Up: Cipher functions

4.2.7 ChaCha
------------

ChaCha is a variant of the stream cipher Salsa20 (*note Salsa20::),
below, also designed by D. J. Bernstein.  Nettle defines ChaCha in
‘<nettle/chacha.h>’.

 -- Context struct: struct chacha_ctx

 -- Constant: CHACHA_KEY_SIZE
     ChaCha key size, 32.

 -- Constant: CHACHA_BLOCK_SIZE
     ChaCha block size, 64.

 -- Constant: CHACHA_NONCE_SIZE
     Size of the nonce, 8.

 -- Constant: CHACHA_COUNTER_SIZE
     Size of the counter, 8.

 -- Function: void chacha_set_key (struct chacha_ctx *CTX, const uint8_t
          *KEY)
     Initialize the cipher.  The same function is used for both
     encryption and decryption.  Before using the cipher, you _must_
     also call ‘chacha_set_nonce’, see below.

 -- Function: void chacha_set_nonce (struct chacha_ctx *CTX, const
          uint8_t *NONCE)
     Sets the nonce.  It is always of size ‘CHACHA_NONCE_SIZE’, 8
     octets.  This function also initializes the block counter, setting
     it to zero.

 -- Function: void chacha_set_counter (struct chacha_ctx *CTX, const
          uint8_t *COUNTER)
     Sets the block counter.  It is always of size
     ‘CHACHA_COUNTER_SIZE’, 8 octets.  This is rarely needed since
     ‘chacha_set_nonce’ initializes the block counter to zero.  When it
     is still necessary, this function must be called after
     ‘chacha_set_nonce’.

 -- Function: void chacha_crypt (struct chacha_ctx *CTX, size_t LENGTH,
          uint8_t *DST, const uint8_t *SRC)
     Encrypts or decrypts the data of a message, using ChaCha.  When a
     message is encrypted using a sequence of calls to ‘chacha_crypt’,
     all but the last call _must_ use a length that is a multiple of
     ‘CHACHA_BLOCK_SIZE’.

4.2.7.1 32-bit counter variant
..............................

While the original paper uses 64-bit counter value, the variant defined
in ‘RFC 8439’ uses 32-bit counter value.  This variant is particularly
useful for *note ChaCha-Poly1305:: AEAD construction, which supports
12-octet nonces.

 -- Constant: CHACHA_NONCE96_SIZE
     Size of the nonce, 12.

 -- Constant: CHACHA_COUNTER32_SIZE
     Size of the counter, 4.

 -- Function: void chacha_set_nonce96 (struct chacha_ctx *CTX, const
          uint8_t *NONCE)
     Sets the nonce.  This is similar to the above ‘chacha_set_nonce’,
     but the input is always of size ‘CHACHA_NONCE96_SIZE’, 12 octets.

 -- Function: void chacha_set_counter32 (struct chacha_ctx *CTX, const
          uint8_t *COUNTER)
     Sets the block counter.  This is similar to the above
     ‘chacha_set_counter’, but the input is always of size
     ‘CHACHA_COUNTER32_SIZE’, 4 octets.

 -- Function: void chacha_crypt32 (struct chacha_ctx *CTX, size_t
          LENGTH, uint8_t *DST, const uint8_t *SRC)
     Encrypts or decrypts the data of a message, using ChaCha.  This is
     similar to the above ‘chacha_crypt’, but it assumes the internal
     counter value is 32-bit long and the nonce is 96-bit long.


File: nettle.info,  Node: DES,  Next: DES3,  Prev: ChaCha,  Up: Cipher functions

4.2.8 DES
---------

DES is the old Data Encryption Standard, specified by NIST. It uses a
block size of 64 bits (8 octets), and a key size of 56 bits.  However,
the key bits are distributed over 8 octets, where the least significant
bit of each octet may be used for parity.  A common way to use DES is to
generate 8 random octets in some way, then set the least significant bit
of each octet to get odd parity, and initialize DES with the resulting
key.

   The key size of DES is so small that keys can be found by brute
force, using specialized hardware or lots of ordinary work stations in
parallel.  One shouldn't be using plain DES at all today, if one uses
DES at all one should be using "triple DES", see DES3 below.

   DES also has some weak keys.  Nettle defines DES in ‘<nettle/des.h>’.

 -- Context struct: struct des_ctx

 -- Constant: DES_BLOCK_SIZE
     The DES block-size, 8.

 -- Constant: DES_KEY_SIZE
     DES key size, 8.

 -- Function: int des_set_key (struct des_ctx *CTX, const uint8_t *KEY)
     Initialize the cipher.  The same function is used for both
     encryption and decryption.  Parity bits are ignored.  Checks for
     weak keys, returning 1 for good keys and 0 for weak keys.
     Applications that don't care about weak keys can ignore the return
     value.

 -- Function: void des_encrypt (struct des_ctx *CTX, size_t LENGTH,
          uint8_t *DST, const uint8_t *SRC)
     Encryption function.  LENGTH must be an integral multiple of the
     block size.  If it is more than one block, the data is processed in
     ECB mode.  ‘src’ and ‘dst’ may be equal, but they must not overlap
     in any other way.

 -- Function: void des_decrypt (struct des_ctx *CTX, size_t LENGTH,
          uint8_t *DST, const uint8_t *SRC)
     Analogous to ‘des_encrypt’

 -- Function: int des_check_parity (size_t LENGTH, const uint8_t *KEY)
     Checks that the given key has correct, odd, parity.  Returns 1 for
     correct parity, and 0 for bad parity.

 -- Function: void des_fix_parity (size_t LENGTH, uint8_t *DST, const
          uint8_t *SRC)
     Adjusts the parity bits to match DES's requirements.  You need this
     function if you have created a random-looking string by a key
     agreement protocol, and want to use it as a DES key.  DST and SRC
     may be equal.


File: nettle.info,  Node: DES3,  Next: Salsa20,  Prev: DES,  Up: Cipher functions

4.2.9 DES3
----------

The inadequate key size of DES has already been mentioned.  One way to
increase the key size is to pipe together several DES boxes with
independent keys.  It turns out that using two DES ciphers is not as
secure as one might think, even if the key size of the combination is a
respectable 112 bits.

   The standard way to increase DES's key size is to use three DES
boxes.  The mode of operation is a little peculiar: the middle DES box
is wired in the reverse direction.  To encrypt a block with DES3, you
encrypt it using the first 56 bits of the key, then _decrypt_ it using
the middle 56 bits of the key, and finally encrypt it again using the
last 56 bits of the key.  This is known as "ede" triple-DES, for
"encrypt-decrypt-encrypt".

   The "ede" construction provides some backward compatibility, as you
get plain single DES simply by feeding the same key to all three boxes.
That should help keeping down the gate count, and the price, of hardware
circuits implementing both plain DES and DES3.

   DES3 has a key size of 168 bits, but just like plain DES, useless
parity bits are inserted, so that keys are represented as 24 octets (192
bits).  As a 112 bit key is large enough to make brute force attacks
impractical, some applications uses a "two-key" variant of triple-DES.
In this mode, the same key bits are used for the first and the last DES
box in the pipe, while the middle box is keyed independently.  The
two-key variant is believed to be secure, i.e.  there are no known
attacks significantly better than brute force.

   Naturally, it's simple to implement triple-DES on top of Nettle's DES
functions.  Nettle includes an implementation of three-key "ede"
triple-DES, it is defined in the same place as plain DES,
‘<nettle/des.h>’.

 -- Context struct: struct des3_ctx

 -- Constant: DES3_BLOCK_SIZE
     The DES3 block-size is the same as DES_BLOCK_SIZE, 8.

 -- Constant: DES3_KEY_SIZE
     DES key size, 24.

 -- Function: int des3_set_key (struct des3_ctx *CTX, const uint8_t
          *KEY)
     Initialize the cipher.  The same function is used for both
     encryption and decryption.  Parity bits are ignored.  Checks for
     weak keys, returning 1 if all three keys are good keys, and 0 if
     one or more key is weak.  Applications that don't care about weak
     keys can ignore the return value.

   For random-looking strings, you can use ‘des_fix_parity’ to adjust
the parity bits before calling ‘des3_set_key’.

 -- Function: void des3_encrypt (struct des3_ctx *CTX, size_t LENGTH,
          uint8_t *DST, const uint8_t *SRC)
     Encryption function.  LENGTH must be an integral multiple of the
     block size.  If it is more than one block, the data is processed in
     ECB mode.  ‘src’ and ‘dst’ may be equal, but they must not overlap
     in any other way.

 -- Function: void des3_decrypt (struct des3_ctx *CTX, size_t LENGTH,
          uint8_t *DST, const uint8_t *SRC)
     Analogous to ‘des_encrypt’


File: nettle.info,  Node: Salsa20,  Next: Serpent,  Prev: DES3,  Up: Cipher functions

4.2.10 Salsa20
--------------

Salsa20 is a fairly recent stream cipher designed by D. J. Bernstein.
It is built on the observation that a cryptographic hash function can be
used for encryption: Form the hash input from the secret key and a
counter, xor the hash output and the first block of the plaintext, then
increment the counter to process the next block (similar to CTR mode,
*note CTR::).  Bernstein defined an encryption algorithm, Snuffle, in
this way to ridicule United States export restrictions which treated
hash functions as nice and harmless, but ciphers as dangerous munitions.

   Salsa20 uses the same idea, but with a new specialized hash function
to mix key, block counter, and a couple of constants.  It's also
designed for speed; on x86_64, it is currently the fastest cipher
offered by nettle.  It uses a block size of 512 bits (64 octets) and
there are two specified key sizes, 128 and 256 bits (16 and 32 octets).

   *Caution:* The hash function used in Salsa20 is _not_ directly
applicable for use as a general hash function.  It's _not_ collision
resistant if arbitrary inputs are allowed, and furthermore, the input
and output is of fixed size.

   When using Salsa20 to process a message, one specifies both a key and
a “nonce”, the latter playing a similar rôle to the initialization
vector (IV) used with CBC or CTR mode.  One can use the same key for
several messages, provided one uses a unique random iv for each message.
The iv is 64 bits (8 octets).  The block counter is initialized to zero
for each message, and is also 64 bits (8 octets).  Nettle defines
Salsa20 in ‘<nettle/salsa20.h>’.

 -- Context struct: struct salsa20_ctx

 -- Constant: SALSA20_128_KEY_SIZE
 -- Constant: SALSA20_256_KEY_SIZE
     The two supported key sizes, 16 and 32 octets.

 -- Constant: SALSA20_KEY_SIZE
     Recommended key size, 32.

 -- Constant: SALSA20_BLOCK_SIZE
     Salsa20 block size, 64.

 -- Constant: SALSA20_NONCE_SIZE
     Size of the nonce, 8.

 -- Function: void salsa20_128_set_key (struct salsa20_ctx *CTX, const
          uint8_t *KEY)
 -- Function: void salsa20_256_set_key (struct salsa20_ctx *CTX, const
          uint8_t *KEY)
 -- Function: void salsa20_set_key (struct salsa20_ctx *CTX, size_t
          LENGTH, const uint8_t *KEY)
     Initialize the cipher.  The same function is used for both
     encryption and decryption.  ‘salsa20_128_set_key’ and
     ‘salsa20_128_set_key’ use a fix key size each, 16 and 32 octets,
     respectively.  The function ‘salsa20_set_key’ is provided for
     backwards compatibility, and the LENGTH argument must be either 16
     or 32.  Before using the cipher, you _must_ also call
     ‘salsa20_set_nonce’, see below.

 -- Function: void salsa20_set_nonce (struct salsa20_ctx *CTX, const
          uint8_t *NONCE)
     Sets the nonce.  It is always of size ‘SALSA20_NONCE_SIZE’, 8
     octets.  This function also initializes the block counter, setting
     it to zero.

 -- Function: void salsa20_crypt (struct salsa20_ctx *CTX, size_t
          LENGTH, uint8_t *DST, const uint8_t *SRC)
     Encrypts or decrypts the data of a message, using salsa20.  When a
     message is encrypted using a sequence of calls to ‘salsa20_crypt’,
     all but the last call _must_ use a length that is a multiple of
     ‘SALSA20_BLOCK_SIZE’.

   The full salsa20 cipher uses 20 rounds of mixing.  Variants of
Salsa20 with fewer rounds are possible, and the 12-round variant is
specified by eSTREAM, see
<https://www.ecrypt.eu.org/stream/finallist.html>.  Nettle calls this
variant ‘salsa20r12’.  It uses the same context struct and key setup as
the full salsa20 cipher, but a separate function for encryption and
decryption.

 -- Function: void salsa20r12_crypt (struct salsa20_ctx *CTX, size_t
          LENGTH, uint8_t *DST, const uint8_t *SRC)
     Encrypts or decrypts the data of a message, using salsa20 reduced
     to 12 rounds.


File: nettle.info,  Node: Serpent,  Next: SM4,  Prev: Salsa20,  Up: Cipher functions

4.2.11 Serpent
--------------

SERPENT is one of the AES finalists, designed by Ross Anderson, Eli
Biham and Lars Knudsen.  Thus, the interface and properties are similar
to AES'. One peculiarity is that it is quite pointless to use it with
anything but the maximum key size, smaller keys are just padded to
larger ones.  Nettle defines SERPENT in ‘<nettle/serpent.h>’.

 -- Context struct: struct serpent_ctx

 -- Constant: SERPENT_BLOCK_SIZE
     The SERPENT block-size, 16.

 -- Constant: SERPENT_MIN_KEY_SIZE
     Minimum SERPENT key size, 16.

 -- Constant: SERPENT_MAX_KEY_SIZE
     Maximum SERPENT key size, 32.

 -- Constant: SERPENT_KEY_SIZE
     Default SERPENT key size, 32.

 -- Function: void serpent_set_key (struct serpent_ctx *CTX, size_t
          LENGTH, const uint8_t *KEY)
     Initialize the cipher.  The same function is used for both
     encryption and decryption.

 -- Function: void serpent_encrypt (struct serpent_ctx *CTX, size_t
          LENGTH, uint8_t *DST, const uint8_t *SRC)
     Encryption function.  LENGTH must be an integral multiple of the
     block size.  If it is more than one block, the data is processed in
     ECB mode.  ‘src’ and ‘dst’ may be equal, but they must not overlap
     in any other way.

 -- Function: void serpent_decrypt (struct serpent_ctx *CTX, size_t
          LENGTH, uint8_t *DST, const uint8_t *SRC)
     Analogous to ‘serpent_encrypt’


File: nettle.info,  Node: SM4,  Next: Twofish,  Prev: Serpent,  Up: Cipher functions

4.2.12 SM4
----------

SM4 is a block cipher standard adopted by the government of the People's
Republic of China, and it was issued by the State Cryptography
Administration on March 21, 2012.  The standard is GM/T 0002-2012 "SM4
block cipher algorithm".  Nettle defines it in ‘<nettle/sm4.h>’.

 -- Context struct: struct sm4_ctx

 -- Constant: SM4_BLOCK_SIZE
     The SM4 block-size, 16.

 -- Constant: SM4_KEY_SIZE
     Default SM4 key size, 16.

 -- Function: void sm4_set_encrypt_key (struct sm4_ctx *CTX, const
          uint8_t *KEY)
     Initialize the cipher.  The function is used for encryption.

 -- Function: void sm4_set_decrypt_key (struct sm4_ctx *CTX, const
          uint8_t *KEY)
     Initialize the cipher.  The function is used for decryption.

 -- Function: void sm4_crypt (const struct sm4_ctx *CTX, size_t LENGTH,
          uint8_t *DST, const uint8_t *SRC)
     Cryption function.  LENGTH must be an integral multiple of the
     block size.  If it is more than one block, the data is processed in
     ECB mode.  ‘src’ and ‘dst’ may be equal, but they must not overlap
     in any other way.  The same function is used for both encryption
     and decryption.


File: nettle.info,  Node: Twofish,  Next: nettle_cipher abstraction,  Prev: SM4,  Up: Cipher functions

4.2.13 Twofish
--------------

Another AES finalist, this one designed by Bruce Schneier and others.
Nettle defines it in ‘<nettle/twofish.h>’.

 -- Context struct: struct twofish_ctx

 -- Constant: TWOFISH_BLOCK_SIZE
     The TWOFISH block-size, 16.

 -- Constant: TWOFISH_MIN_KEY_SIZE
     Minimum TWOFISH key size, 16.

 -- Constant: TWOFISH_MAX_KEY_SIZE
     Maximum TWOFISH key size, 32.

 -- Constant: TWOFISH_KEY_SIZE
     Default TWOFISH key size, 32.

 -- Function: void twofish_set_key (struct twofish_ctx *CTX, size_t
          LENGTH, const uint8_t *KEY)
     Initialize the cipher.  The same function is used for both
     encryption and decryption.

 -- Function: void twofish_encrypt (struct twofish_ctx *CTX, size_t
          LENGTH, uint8_t *DST, const uint8_t *SRC)
     Encryption function.  LENGTH must be an integral multiple of the
     block size.  If it is more than one block, the data is processed in
     ECB mode.  ‘src’ and ‘dst’ may be equal, but they must not overlap
     in any other way.

 -- Function: void twofish_decrypt (struct twofish_ctx *CTX, size_t
          LENGTH, uint8_t *DST, const uint8_t *SRC)
     Analogous to ‘twofish_encrypt’


File: nettle.info,  Node: nettle_cipher abstraction,  Prev: Twofish,  Up: Cipher functions

4.2.14 The ‘struct nettle_cipher’ abstraction
---------------------------------------------

Nettle includes a struct including information about some of the more
regular cipher functions.  It can be useful for applications that need a
simple way to handle various algorithms.  Nettle defines these structs
in ‘<nettle/nettle-meta.h>’.

 -- Meta struct: struct nettle_cipher name context_size block_size
          key_size set_encrypt_key set_decrypt_key encrypt decrypt
     The last four attributes are function pointers, of types
     ‘nettle_set_key_func *’ and ‘nettle_cipher_func *’.  The first
     argument to these functions is a ‘const void *’ pointer to a
     context struct, which is of size ‘context_size’.

 -- Constant Struct: struct nettle_cipher nettle_aes128
 -- Constant Struct: struct nettle_cipher nettle_aes192
 -- Constant Struct: struct nettle_cipher nettle_aes256

 -- Constant Struct: struct nettle_cipher nettle_arctwo40
 -- Constant Struct: struct nettle_cipher nettle_arctwo64
 -- Constant Struct: struct nettle_cipher nettle_arctwo128
 -- Constant Struct: struct nettle_cipher nettle_arctwo_gutmann128

 -- Constant Struct: struct nettle_cipher nettle_arcfour128

 -- Constant Struct: struct nettle_cipher nettle_camellia128
 -- Constant Struct: struct nettle_cipher nettle_camellia192
 -- Constant Struct: struct nettle_cipher nettle_camellia256

 -- Constant Struct: struct nettle_cipher nettle_cast128

 -- Constant Struct: struct nettle_cipher nettle_serpent128
 -- Constant Struct: struct nettle_cipher nettle_serpent192
 -- Constant Struct: struct nettle_cipher nettle_serpent256

 -- Constant Struct: struct nettle_cipher nettle_twofish128
 -- Constant Struct: struct nettle_cipher nettle_twofish192
 -- Constant Struct: struct nettle_cipher nettle_twofish256
     Nettle includes such structs for all the _regular_ ciphers, i.e.
     ones without weak keys or other oddities.

   Nettle also exports a list of all these ciphers without weak keys or
other oddities.

 -- Function: const struct nettle_cipher ** nettle_get_ciphers (void)
     Returns a NULL-terminated list of pointers to supported block
     ciphers.  This list can be used to dynamically enumerate or search
     the supported algorithms.

 -- Macro: nettle_ciphers
     A macro expanding to a call to nettle_get_ciphers.  In earlier
     versions, this was not a macro but the actual array of pointers.


File: nettle.info,  Node: Cipher modes,  Next: Authenticated encryption,  Prev: Cipher functions,  Up: Reference

4.3 Cipher modes
================

Cipher modes of operation specifies the procedure to use when encrypting
a message that is larger than the cipher's block size.  As explained in
*Note Cipher functions::, splitting the message into blocks and
processing them independently with the block cipher (Electronic Code
Book mode, ECB), leaks information.

   Besides ECB, Nettle provides several other modes of operation: Cipher
Block Chaining (CBC), Counter mode (CTR), Cipher Feedback (CFB and
CFB8), XEX-based tweaked-codebook mode with ciphertext stealing (XTS)
and a couple of AEAD modes (*note Authenticated encryption::).  CBC is
widely used, but there are a few subtle issues of information leakage,
see, e.g., SSH CBC vulnerability
(https://www.kb.cert.org/vuls/id/958563).  Today, CTR is usually
preferred over CBC.

   Modes like CBC, CTR, CFB and CFB8 provide _no_ message
authentication, and should always be used together with a MAC (*note
Keyed hash functions::) or signature to authenticate the message.

* Menu:

* CBC::
* CTR::
* CFB and CFB8::
* XTS::


File: nettle.info,  Node: CBC,  Next: CTR,  Up: Cipher modes

4.3.1 Cipher Block Chaining
---------------------------

When using CBC mode, plaintext blocks are not encrypted independently of
each other, like in Electronic Cook Book mode.  Instead, when encrypting
a block in CBC mode, the previous ciphertext block is XORed with the
plaintext before it is fed to the block cipher.  When encrypting the
first block, a random block called an “IV”, or Initialization Vector, is
used as the "previous ciphertext block".  The IV should be chosen
randomly, but it need not be kept secret, and can even be transmitted in
the clear together with the encrypted data.

   In symbols, if ‘E_k’ is the encryption function of a block cipher,
and ‘IV’ is the initialization vector, then ‘n’ plaintext blocks
‘M_1’,... ‘M_n’ are transformed into ‘n’ ciphertext blocks ‘C_1’,...
‘C_n’ as follows:

     C_1 = E_k(IV  XOR M_1)
     C_2 = E_k(C_1 XOR M_2)

     ...

     C_n = E_k(C_(n-1) XOR M_n)

   Nettle provides two main functions for applying a block cipher in
Cipher Block Chaining (CBC) mode, one for encryption and one for
decryption.  These functions uses ‘const void *’ to pass cipher contexts
around.  The CBC interface is defined in ‘<nettle/cbc.h>’.

 -- Function: void cbc_encrypt (const void *CTX, nettle_cipher_func *F,
          size_t BLOCK_SIZE, uint8_t *IV, size_t LENGTH, uint8_t *DST,
          const uint8_t *SRC)
 -- Function: void cbc_decrypt (const void *CTX, nettle_cipher_func *F,
          size_t BLOCK_SIZE, uint8_t *IV, size_t LENGTH, uint8_t *DST,
          const uint8_t *SRC)

     Applies the encryption or decryption function F in CBC mode.  The
     final ciphertext block processed is copied into IV before
     returning, so that a large message can be processed by a sequence
     of calls to ‘cbc_encrypt’.  The function F is of type

     ‘void F (const void *CTX, size_t LENGTH, uint8_t DST, const uint8_t
     *SRC)’,

     and the ‘cbc_encrypt’ and ‘cbc_decrypt’ functions pass their
     argument CTX on to F.

4.3.1.1 Utility macros
......................

There are also some macros to help use these functions correctly.

 -- Macro: CBC_CTX (CONTEXT_TYPE, BLOCK_SIZE)
     Expands to
          {
             context_type ctx;
             uint8_t iv[block_size];
          }

   It can be used to define a CBC context struct, either directly,

     struct CBC_CTX(struct aes256_ctx, AES_BLOCK_SIZE) ctx;

   or to give it a struct tag,

     struct aes256_cbc_ctx CBC_CTX (struct aes256_ctx, AES_BLOCK_SIZE);

 -- Macro: CBC_SET_IV (CTX, IV)
     First argument is a pointer to a context struct as defined by
     ‘CBC_CTX’, and the second is a pointer to an Initialization Vector
     (IV) that is copied into that context.

 -- Macro: CBC_ENCRYPT (CTX, F, LENGTH, DST, SRC)
 -- Macro: CBC_DECRYPT (CTX, F, LENGTH, DST, SRC)
     A simpler way to invoke ‘cbc_encrypt’ and ‘cbc_decrypt’.  The first
     argument is a pointer to a context struct as defined by ‘CBC_CTX’,
     and the second argument is an encryption or decryption function
     following Nettle's conventions.  The last three arguments define
     the source and destination area for the operation.

   These macros use some tricks to make the compiler display a warning
if the types of F and CTX don't match, e.g.  if you try to use an
‘struct aes256_ctx’ context with the ‘des_encrypt’ function.

4.3.1.2 Cipher-specific functions
.................................

Encryption in CBC mode (but not decryption!)  is inherently serial.  It
can pass only one block at a time to the block cipher's encrypt
function.  Optimizations to process several blocks in parallel can't be
applied, and on platforms where the underlying cipher is fast,
per-function-call overhead, e.g., loading subkeys from memory into
registers, can be significant.  Depending on platform and cipher used,
‘cbc_encrypt’ can be considerably slower than both ‘cbc_decrypt’ and CTR
mode.  The second reason for poor performance can be addressed by having
a combined CBC and encrypt function, for ciphers where the overhead is
significant.

   Nettle currently includes such special functions only for AES.

 -- Function: void cbc_aes128_encrypt (const struct aes128_ctx *CTX,
          uint8_t *IV, size_t LENGTH, uint8_t *DST, const uint8_t *SRC)
 -- Function: void cbc_aes192_encrypt (const struct aes192_ctx *CTX,
          uint8_t *IV, size_t LENGTH, uint8_t *DST, const uint8_t *SRC)
 -- Function: void cbc_aes256_encrypt (const struct aes256_ctx *CTX,
          uint8_t *IV, size_t LENGTH, uint8_t *DST, const uint8_t *SRC)
     Calling ‘cbc_aes128_encrypt(ctx, iv, length, dst, src)’ does the
     same thing as calling ‘cbc_encrypt(ctx, aes128_encrypt,
     AES_BLOCK_SIZE, iv, length, dst, src)’, but is more efficient on
     certain platforms.


File: nettle.info,  Node: CTR,  Next: CFB and CFB8,  Prev: CBC,  Up: Cipher modes

4.3.2 Counter mode
------------------

Counter mode (CTR) uses the block cipher as a keyed pseudo-random
generator.  The output of the generator is XORed with the data to be
encrypted.  It can be understood as a way to transform a block cipher to
a stream cipher.

   The message is divided into ‘n’ blocks ‘M_1’,... ‘M_n’, where ‘M_n’
is of size ‘m’ which may be smaller than the block size.  Except for the
last block, all the message blocks must be of size equal to the cipher's
block size.

   If ‘E_k’ is the encryption function of a block cipher, ‘IC’ is the
initial counter, then the ‘n’ plaintext blocks are transformed into ‘n’
ciphertext blocks ‘C_1’,... ‘C_n’ as follows:

     C_1 = E_k(IC) XOR M_1
     C_2 = E_k(IC + 1) XOR M_2

     ...

     C_(n-1) = E_k(IC + n - 2) XOR M_(n-1)
     C_n = E_k(IC + n - 1) [1..m] XOR M_n

   The IC is the initial value for the counter, it plays a similar rôle
as the IV for CBC.  When adding, ‘IC + x’, IC is interpreted as an
integer, in network byte order.  For the last block, ‘E_k(IC + n - 1)
[1..m]’ means that the cipher output is truncated to ‘m’ bytes.

 -- Function: void ctr_crypt (const void *CTX, nettle_cipher_func *F,
          size_t BLOCK_SIZE, uint8_t *CTR, size_t LENGTH, uint8_t *DST,
          const uint8_t *SRC)

     Applies the encryption function F in CTR mode.  Note that for CTR
     mode, encryption and decryption is the same operation, and hence F
     should always be the encryption function for the underlying block
     cipher.

     When a message is encrypted using a sequence of calls to
     ‘ctr_crypt’, all but the last call _must_ use a length that is a
     multiple of the block size.

   Like for CBC, there are also a couple of helper macros.

 -- Macro: CTR_CTX (CONTEXT_TYPE, BLOCK_SIZE)
     Expands to
          {
             context_type ctx;
             uint8_t ctr[block_size];
          }

 -- Macro: CTR_SET_COUNTER (CTX, IV)
     First argument is a pointer to a context struct as defined by
     ‘CTR_CTX’, and the second is a pointer to an initial counter that
     is copied into that context.

 -- Macro: CTR_CRYPT (CTX, F, LENGTH, DST, SRC)
     A simpler way to invoke ‘ctr_crypt’.  The first argument is a
     pointer to a context struct as defined by ‘CTR_CTX’, and the second
     argument is an encryption function following Nettle's conventions.
     The last three arguments define the source and destination area for
     the operation.


File: nettle.info,  Node: CFB and CFB8,  Next: XTS,  Prev: CTR,  Up: Cipher modes

4.3.3 Cipher Feedback mode
--------------------------

Cipher Feedback mode (CFB) and Cipher Feedback 8-bit mode (CFB8) being
close relatives to both CBC mode and CTR mode borrow some
characteristics from stream ciphers.

   For CFB the message is divided into ‘n’ blocks ‘M_1’,... ‘M_n’, where
‘M_n’ is of size ‘m’ which may be smaller than the block size.  Except
for the last block, all the message blocks must be of size equal to the
cipher's block size.

   If ‘E_k’ is the encryption function of a block cipher, ‘IV’ is the
initialization vector, then the ‘n’ plaintext blocks are transformed
into ‘n’ ciphertext blocks ‘C_1’,... ‘C_n’ as follows:

     C_1 = E_k(IV) XOR M_1
     C_2 = E_k(C_1) XOR M_2

     ...

     C_(n-1) = E_k(C_(n - 2)) XOR M_(n-1)
     C_n = E_k(C_(n - 1)) [1..m] XOR M_n

   Cipher Feedback 8-bit mode (CFB8) transforms block cipher into a
stream cipher.  The message is encrypted byte after byte, not requiring
any padding.

   If ‘E_k’ is the encryption function of a block cipher, ‘b’ is ‘E_k’
block size, ‘IV’ is the initialization vector, then the ‘n’ plaintext
bytes are transformed into ‘n’ ciphertext bytes ‘C_1’,... ‘C_n’ as
follows:

     I_1 = IV
     C_1 = E_k(I_1) [1..8] XOR M_1
     I_2 = I_1 [9..b] << 8 | C_1
     C_2 = E_k(I_2) [1..8] XOR M_2

     ...

     I_(n-1) = I_(n-2) [9..b] << 8 | C_(n-2)
     C_(n-1) = E_k(I_(n-1)) [1..8] XOR M_(n-1)
     I_n = I_(n-1) [9..b] << 8 | C_(n-1)
     C_n = E_k(I_n) [1..8] XOR M_n

   Nettle's includes functions for applying a block cipher in Cipher
Feedback (CFB) and Cipher Feedback 8-bit (CFB8) modes.  These functions
uses ‘void *’ to pass cipher contexts around.

 -- Function: void cfb_encrypt (const void *CTX, nettle_cipher_func *F,
          size_t BLOCK_SIZE, uint8_t *IV, size_t LENGTH, uint8_t *DST,
          const uint8_t *SRC)
 -- Function: void cfb_decrypt (const void *CTX, nettle_cipher_func *F,
          size_t BLOCK_SIZE, uint8_t *IV, size_t LENGTH, uint8_t *DST,
          const uint8_t *SRC)

     Applies the encryption or decryption function F in CFB mode.  The
     final ciphertext block processed is copied into IV before
     returning, so that a large message can be processed by a sequence
     of calls to ‘cfb_encrypt’.  Note that for CFB mode internally uses
     encryption only function and hence F should always be the
     encryption function for the underlying block cipher.

     When a message is encrypted using a sequence of calls to
     ‘cfb_encrypt’, all but the last call _must_ use a length that is a
     multiple of the block size.

 -- Function: void cfb8_encrypt (const void *CTX, nettle_cipher_func *F,
          size_t BLOCK_SIZE, uint8_t *IV, size_t LENGTH, uint8_t *DST,
          const uint8_t *SRC)
 -- Function: void cfb8_decrypt (const void *CTX, nettle_cipher_func *F,
          size_t BLOCK_SIZE, uint8_t *IV, size_t LENGTH, uint8_t *DST,
          const uint8_t *SRC)

     Applies the encryption or decryption function F in CFB8 mode.  The
     final IV block processed is copied into IV before returning, so
     that a large message can be processed by a sequence of calls to
     ‘cfb8_encrypt’.  Note that for CFB8 mode internally uses encryption
     only function and hence F should always be the encryption function
     for the underlying block cipher.

   Like for CBC, there are also a couple of helper macros.

 -- Macro: CFB_CTX (CONTEXT_TYPE, BLOCK_SIZE)
     Expands to
          {
             context_type ctx;
             uint8_t iv[block_size];
          }

 -- Macro: CFB_SET_IV(CTX, IV)
     First argument is a pointer to a context struct as defined by
     ‘CFB_CTX’, and the second is a pointer to an initialization vector
     that is copied into that context.

 -- Macro: CFB_ENCRYPT (CTX, F, LENGTH, DST, SRC)
     A simpler way to invoke ‘cfb_encrypt’.  The first argument is a
     pointer to a context struct as defined by ‘CFB_CTX’, and the second
     argument is an encryption function following Nettle's conventions.
     The last three arguments define the source and destination area for
     the operation.

 -- Macro: CFB_DECRYPT (CTX, F, LENGTH, DST, SRC)
     A simpler way to invoke ‘cfb_decrypt’.  The first argument is a
     pointer to a context struct as defined by ‘CFB_CTX’, and the second
     argument is an encryption function following Nettle's conventions.
     The last three arguments define the source and destination area for
     the operation.

 -- Macro: CFB8_CTX (CONTEXT_TYPE, BLOCK_SIZE)
     Expands to
          {
             context_type ctx;
             uint8_t iv[block_size];
          }

 -- Macro: CFB8_SET_IV (CTX, IV)
     First argument is a pointer to a context struct as defined by
     ‘CFB8_CTX’, and the second is a pointer to an initialization vector
     that is copied into that context.

 -- Macro: CFB8_ENCRYPT (CTX, F, LENGTH, DST, SRC)
     A simpler way to invoke ‘cfb8_encrypt’.  The first argument is a
     pointer to a context struct as defined by ‘CFB8_CTX’, and the
     second argument is an encryption function following Nettle's
     conventions.  The last three arguments define the source and
     destination area for the operation.

 -- Macro: CFB8_DECRYPT (CTX, F, LENGTH, DST, SRC)
     A simpler way to invoke ‘cfb8_decrypt’.  The first argument is a
     pointer to a context struct as defined by ‘CFB8_CTX’, and the
     second argument is an encryption function following Nettle's
     conventions.  The last three arguments define the source and
     destination area for the operation.


File: nettle.info,  Node: XTS,  Prev: CFB and CFB8,  Up: Cipher modes

4.3.4 XEX-based tweaked-codebook mode with ciphertext stealing
--------------------------------------------------------------

XEX-based tweaked-codebook mode with ciphertext stealing (XTS) is a
block mode like (CBC) but tweaked to be able to encrypt partial blocks
via a technique called ciphertext stealing, where the last complete
block of ciphertext is split and part returned as the last block and
part used as plaintext for the second to last block.  This mode is
principally used to encrypt data at rest where it is not possible to
store additional metadata or blocks larger than the plain text.  The
most common usage is for disk encryption.  Due to the fact that
ciphertext expansion is not possible, data is not authenticated.  This
mode should not be used where authentication is critical.

   The message is divided into ‘n’ blocks ‘M_1’,... ‘M_n’, where ‘M_n’
is of size ‘m’ which may be smaller than the block size.  XTS always
uses a fixed blocksize of 128 bit (16 bytes) length.

   Unlike other modes, the key is double the size of that for the used
cipher mode (for example 256bit for AES-128 and 512bit for AES-256).

   XTS encryption mode operates given:
   • A multiplication by a primitive element alpha.  ‘MUL a^j’ here
     represents the multiplication, where ‘j’ is the power of alpha, and
     the input value is converted into a 16 bytes array ‘a_0[k], k =
     0,1,..,15’.  The multiplication is calculated as ‘a_(j+1)[0] =
     (2(a_j[0] mod 128)) XOR (135 * floor(a_j[15]/128)’ ‘a_(j+1)[k] =
     (2(a_j[k] mod 128)) XOR (floor(a_j[k-1]/128), k = 1,2,..15’ Note
     that this operation is practically a 1 bit left shift operation
     with carry propagating from one byte to the next, and if the last
     bit shift results in a carry the decimal value 135 is XORed into
     the first byte.

   • The encryption key is provided as the ‘Key = K1 | K2’, where ‘|’
     denotes string concatenation.  ‘E_k1’ is the encryption function of
     the block cipher using ‘K1’ as the key, and ‘E_k2’ is the same
     encryption function using ‘K2’

   • A 128 bit tweak value is provided as input and is denoted as ‘IV’

   The ‘n’ plaintext blocks are transformed into ‘n’ ciphertext blocks
‘C_1’,... ‘C_n’ as follows.

   For a plaintext length that is a perfect multiple of the XTS block
size:
     T_1 = E_k2(IV)
     C_1 = E_k1(P_1 XOR T_1) XOR T_1

     ...

     T_n = T_(n-1) MUL a
     C_n = E_k1(P_n XOR T_n) XOR T_n

   For any other plaintext lengths:
     T_1 = E_k2(IV)
     C_1 = E_k1(P_1 XOR T_1) XOR T_1

     ...

     T_(n-2) = T_(n-3) MUL a
     C_(n-2) = E_k1(P_(n-2) XOR T_(n-2)) XOR T_(n-2)

     T_(n-1) = T_(n-2) MUL a
     CC_(n-1) = E_k1(P_(n-1) XOR T_(n-1)) XOR T_(n-1)

     T_n = T_(n-1) MUL a
     PP = [1..m]Pn | [m+1..128]CC_(n-1)
     C_(n-1) = E_k1(PP XOR T_n) XOR T_n

     C_n = [1..m]CC_(n-1)

4.3.4.1 General (XTS) interface.
................................

The two general functions to encrypt and decrypt using the XTS block
cipher mode are the following:

 -- Function: void xts_encrypt_message (const void *ENC_CTX, const void
          *TWK_CTX, nettle_cipher_func *ENCF, const uint8_t *TWEAK,
          size_t LENGTH, uint8_t *DST, const uint8_t *SRC)
 -- Function: void xts_decrypt_message (const void *DEC_CTX, const void
          *TWK_CTX, nettle_cipher_func *DECF, nettle_cipher_func *ENCF,
          const uint8_t *TWEAK, size_t LENGTH, uint8_t *DST, const
          uint8_t *SRC)

     Applies the encryption function ENCF or the decryption function
     DECF in XTS mode.  At least one block (16 bytes) worth of data must
     be available therefore specifying a length less than 16 bytes is
     illegal.

     The functions ENCF DECF are of type

     ‘void f (const void *CTX, size_t LENGTH, uint8_t *DST, const
     uint8_t *SRC)’,

     and the ‘xts_encrypt_message’ and ‘xts_decrypt_message’ functions
     pass their arguments ENC_CTX, TWK_CTX and DEC_CTX to the functions
     ENCF, DECF as CTX.

4.3.4.2 XTS-AES interface
.........................

The AES XTS functions provide an API for using the XTS mode with the AES
block ciphers.  The parameters all have the same meaning as the general
interface, except that the ENC_CTX, DEC_CTX, TWK_CTX, ENCF and DECF are
replaced with an AES context structure called CTX, and a appropriate
set-key function must be called before using any of the encryption or
decryption functions in this interface.

 -- Context struct: struct xts_aes128_key
     Holds state corresponding to the AES-128 block cipher.

 -- Context struct: struct xts_aes256_key
     Holds state corresponding to the AES-256 block cipher.

 -- Function: void xts_aes128_set_encrypt_key (struct xts_aes128_key
          *CTX, const uint8_t *KEY)
 -- Function: void xts_aes256_set_encrypt_key (struct xts_aes256_key
          *CTX, const uint8_t *KEY)
 -- Function: void xts_aes128_set_decrypt_key (struct xts_aes128_key
          *CTX, const uint8_t *KEY)
 -- Function: void xts_aes256_set_decrypt_key (struct xts_aes256_key
          *CTX, const uint8_t *KEY)
     Initializes the encryption or decryption key for the AES block
     cipher.  The length of the key must be double the size of the key
     for the corresponding cipher (256 bits for AES-128 and 512 bits for
     AES-256).  One of these functions must be called before any of the
     other functions.

 -- Function: void xts_aes128_encrypt_message (struct xts_aes128_key
          *CTX, uint8_t *TWEAK, size_t LENGTH, uint8_t *DST, const
          uint8_t *SRC)
 -- Function: void xts_aes256_encrypt_message (struct xts_aes256_key
          *CTX, uint8_t *TWEAK, size_t LENGTH, uint8_t *DST, const
          uint8_t *SRC)
 -- Function: void xts_aes128_decrypt_message (struct xts_aes128_key
          *CTX, uint8_t *TWEAK, size_t LENGTH, uint8_t *DST, const
          uint8_t *SRC)
 -- Function: void xts_aes256_decrypt_message (struct xts_aes256_key
          *CTX, uint8_t *TWEAK, size_t LENGTH, uint8_t *DST, const
          uint8_t *SRC)
     These are identical to ‘xts_encrypt_message’ and
     ‘xts_decrypt_message’, except that ENC_CTX, DEC_CTX, TWK_CTX, ENCF
     and DECF are replaced by the CTX context structure.


File: nettle.info,  Node: Authenticated encryption,  Next: Keyed hash functions,  Prev: Cipher modes,  Up: Reference

4.4 Authenticated encryption with associated data
=================================================

There are some subtle design choices to be made when combining a block
cipher mode without authentication with a MAC.  In recent years, several
constructions that combine encryption and authentication have been
defined.  These constructions typically also have an additional input,
the "associated data", which is authenticated but not included with the
message.  A simple example is an implicit message number which is
available at both sender and receiver, and which needs authentication in
order to detect deletions or replay of messages.  This family of
building blocks are therefore called AEAD, Authenticated encryption with
associated data.

   The aim is to provide building blocks that it is easier for designers
of protocols and applications to use correctly.  There is also some
potential for improved performance, if encryption and authentication can
be done in a single step.

   For encryption, the inputs are:

   • The key, which can be used for many messages.
   • A nonce, which must be unique for each message using the same key.
   • Additional associated data to be authenticated, but not included in
     the message.
   • The cleartext message to be encrypted.

   The outputs are:

   • The ciphertext, of the same size as the cleartext.
   • A digest or "authentication tag".

   Decryption works the same, but with cleartext and ciphertext
interchanged.  Most of the currently supported AEAD algorithms use the
encryption function of the underlying block cipher, for both encryption
and decryption (OCB being a notable exception).

   Usually, the authentication tag should be appended at the end of the
ciphertext, producing an encrypted message which is slightly longer than
the cleartext.  However, Nettle's low level AEAD functions produce the
authentication tag as a separate output for both encryption and
decryption.

   Both associated data and the message data (cleartext or ciphertext)
can be processed incrementally.  In general, all associated data must be
processed before the message data, and all calls but the last one must
use a length that is a multiple of the block size, although some AEAD
may implement more liberal conventions.  The CCM mode is a bit special
in that it requires the message lengths up front, other AEAD
constructions don't have this restriction.

   Of the supported AEAD constructions in Nettle, Galois/Counter mode
(GCM) is widely used, and was originally designed for high performance
in hardware implementations.  Software performance is rather poor unless
there's an efficient "carry-less multiplication" instruction that can be
used.  Both CCM and EAX use the same building blocks, CTR and CMAC, but
the EAX design is cleaner and avoids a couple of inconveniences of CCM.
Therefore, EAX seems like a good conservative choice.  The
ChaCha-Poly1305 scheme is designed for high performance, also on
machines without specialized crypto acceleration instructions.  The
Synthetic Initialization Vector (SIV) modes are designed to not fail
catastrophically if a nonce is reused.

* Menu:

* EAX::
* GCM::
* CCM::
* ChaCha-Poly1305::
* OCB::
* SIV-CMAC::
* SIV-GCM::
* nettle_aead abstraction::


File: nettle.info,  Node: EAX,  Next: GCM,  Up: Authenticated encryption

4.4.1 EAX
---------

The EAX mode is an AEAD mode which combines CTR mode encryption, *Note
CTR::, with a message authentication based on CBC, *Note CBC::.  The
implementation in Nettle is restricted to ciphers with a block size of
128 bits (16 octets).  EAX was defined as a reaction to the CCM mode,
*Note CCM::, which uses the same primitives but has some undesirable and
inelegant properties.

   EAX supports arbitrary nonce size; it's even possible to use an empty
nonce in case only a single message is encrypted for each key.

   Nettle's support for EAX consists of a low-level general interface,
some convenience macros, and specific functions for EAX using AES-128 as
the underlying cipher.  These interfaces are defined in ‘<nettle/eax.h>’

4.4.1.1 General EAX interface
.............................

 -- Context struct: struct eax_key
     EAX state which depends only on the key, but not on the nonce or
     the message.

 -- Context struct: struct eax_ctx
     Holds state corresponding to a particular message.

 -- Constant: EAX_BLOCK_SIZE
     EAX's block size, 16.

 -- Constant: EAX_DIGEST_SIZE
     Size of the EAX digest, also 16.

 -- Function: void eax_set_key (struct eax_key *KEY, const void *CIPHER,
          nettle_cipher_func *F)
     Initializes KEY.  CIPHER gives a context struct for the underlying
     cipher, which must have been previously initialized for encryption,
     and F is the encryption function.

 -- Function: void eax_set_nonce (struct eax_ctx *EAX, const struct
          eax_key *KEY, const void *CIPHER, nettle_cipher_func *F,
          size_t NONCE_LENGTH, const uint8_t *NONCE)
     Initializes CTX for processing a new message, using the given
     nonce.

 -- Function: void eax_update (struct eax_ctx *EAX, const struct eax_key
          *KEY, const void *CIPHER, nettle_cipher_func *F, size_t
          DATA_LENGTH, const uint8_t *DATA)
     Process associated data for authentication.  All but the last call
     for each message _must_ use a length that is a multiple of the
     block size.  Unlike many other AEAD constructions, for EAX it's not
     necessary to complete the processing of all associated data before
     encrypting or decrypting the message data.

 -- Function: void eax_encrypt (struct eax_ctx *EAX, const struct
          eax_key *KEY, const void *CIPHER, nettle_cipher_func *F,
          size_t LENGTH, uint8_t *DST, const uint8_t *SRC)
 -- Function: void eax_decrypt (struct eax_ctx *EAX, const struct
          eax_key *KEY, const void *CIPHER, nettle_cipher_func *F,
          size_t LENGTH, uint8_t *DST, const uint8_t *SRC)
     Encrypts or decrypts the data of a message.  CIPHER is the context
     struct for the underlying cipher and F is the encryption function.
     All but the last call for each message _must_ use a length that is
     a multiple of the block size.

 -- Function: void eax_digest (struct eax_ctx *EAX, const struct eax_key
          *KEY, const void *CIPHER, nettle_cipher_func *F, uint8_t
          *DIGEST)
     Extracts the message digest (also known "authentication tag"), and
     writes ‘EAX_DIGEST_SIZE’ octets to DIGEST.

4.4.1.2 EAX helper macros
.........................

The following macros are defined.

 -- Macro: EAX_CTX (CONTEXT_TYPE)
     This defines an all-in-one context struct, including the context of
     the underlying cipher and all EAX state.  It expands to
          {
             struct eax_key key;
             struct eax_ctx eax;
             context_type cipher;
          }

   For all these macros, CTX, is a context struct as defined by
‘EAX_CTX’, and ENCRYPT is the encryption function of the underlying
cipher.

 -- Macro: EAX_SET_KEY (CTX, SET_KEY, ENCRYPT, KEY)
     SET_KEY is the function for setting the encryption key for the
     underlying cipher, and KEY is the key.

 -- Macro: EAX_SET_NONCE (CTX, ENCRYPT, LENGTH, NONCE)
     Sets the nonce to be used for the message.

 -- Macro: EAX_UPDATE (CTX, ENCRYPT, LENGTH, DATA)
     Process associated data for authentication.

 -- Macro: EAX_ENCRYPT (CTX, ENCRYPT, LENGTH, DST, SRC)
 -- Macro: EAX_DECRYPT (CTX, ENCRYPT, LENGTH, DST, SRC)
     Process message data for encryption or decryption.

 -- Macro: EAX_DIGEST (CTX, ENCRYPT, DIGEST)
     Extract the authentication tag for the message.

4.4.1.3 EAX-AES128 interface
............................

The following functions implement EAX using AES-128 as the underlying
cipher.

 -- Context struct: struct eax_aes128_ctx
     The context struct, defined using ‘EAX_CTX’.

 -- Function: void eax_aes128_set_key (struct eax_aes128_ctx *CTX, const
          uint8_t *KEY)
     Initializes CTX using the given key.

 -- Function: void eax_aes128_set_nonce (struct eax_aes128_ctx *CTX,
          size_t LENGTH, const uint8_t *IV)
     Initializes the per-message state, using the given nonce.

 -- Function: void eax_aes128_update (struct eax_aes128_ctx *CTX, size_t
          LENGTH, const uint8_t *DATA)
     Process associated data for authentication.  All but the last call
     for each message _must_ use a length that is a multiple of the
     block size.

 -- Function: void eax_aes128_encrypt (struct eax_aes128_ctx *CTX,
          size_t LENGTH, uint8_t *DST, const uint8_t *SRC)
 -- Function: void eax_aes128_decrypt (struct eax_aes128_ctx *CTX,
          size_t LENGTH, uint8_t *DST, const uint8_t *SRC)
     Encrypts or decrypts the data of a message.  All but the last call
     for each message _must_ use a length that is a multiple of the
     block size.

 -- Function: void eax_aes128_digest (struct eax_aes128_ctx *CTX,
          uint8_t *DIGEST)
     Extracts the message digest (also known "authentication tag"), and
     writes ‘EAX_DIGEST_SIZE’ octets to DIGEST.


File: nettle.info,  Node: GCM,  Next: CCM,  Prev: EAX,  Up: Authenticated encryption

4.4.2 Galois counter mode
-------------------------

Galois counter mode is an AEAD constructions combining counter mode with
message authentication based on universal hashing.  The main objective
of the design is to provide high performance for hardware
implementations, where other popular MAC algorithms (*note Keyed hash
functions::) become a bottleneck for high-speed hardware
implementations.  It was proposed by David A. McGrew and John Viega in
2005, and recommended by NIST in 2007, NIST Special Publication 800-38D
(https://csrc.nist.gov/publications/nistpubs/800-38D/SP-800-38D.pdf).
It is constructed on top of a block cipher which must have a block size
of 128 bits.

   The authentication in GCM has some known weaknesses, see
<https://csrc.nist.gov/groups/ST/toolkit/BCM/documents/comments/CWC-GCM/Ferguson2.pdf>.
In particular, don't use GCM with short authentication tags.

   Nettle's support for GCM consists of a low-level general interface,
some convenience macros, and specific functions for GCM using AES or
Camellia as the underlying cipher.  These interfaces are defined in
‘<nettle/gcm.h>’

4.4.2.1 General GCM interface
.............................

 -- Context struct: struct gcm_key
     Message independent hash sub-key, and related tables.

 -- Context struct: struct gcm_ctx
     Holds state corresponding to a particular message.

 -- Constant: GCM_BLOCK_SIZE
     GCM's block size, 16.

 -- Constant: GCM_DIGEST_SIZE
     Size of the GCM digest, also 16.

 -- Constant: GCM_IV_SIZE
     Recommended size of the IV, 12.  Arbitrary sizes are allowed.

 -- Function: void gcm_set_key (struct gcm_key *KEY, const void *CIPHER,
          nettle_cipher_func *F)
     Initializes KEY.  CIPHER gives a context struct for the underlying
     cipher, which must have been previously initialized for encryption,
     and F is the encryption function.

 -- Function: void gcm_set_iv (struct gcm_ctx *CTX, const struct gcm_key
          *KEY, size_t LENGTH, const uint8_t *IV)
     Initializes CTX using the given IV.  The KEY argument is actually
     needed only if LENGTH differs from ‘GCM_IV_SIZE’.

 -- Function: void gcm_update (struct gcm_ctx *CTX, const struct gcm_key
          *KEY, size_t LENGTH, const uint8_t *DATA)
     Provides associated data to be authenticated.  If used, must be
     called before ‘gcm_encrypt’ or ‘gcm_decrypt’.  All but the last
     call for each message _must_ use a length that is a multiple of the
     block size.

 -- Function: void gcm_encrypt (struct gcm_ctx *CTX, const struct
          gcm_key *KEY, const void *CIPHER, nettle_cipher_func *F,
          size_t LENGTH, uint8_t *DST, const uint8_t *SRC)
 -- Function: void gcm_decrypt (struct gcm_ctx *CTX, const struct
          gcm_key *KEY, const void *CIPHER, nettle_cipher_func *F,
          size_t LENGTH, uint8_t *DST, const uint8_t *SRC)
     Encrypts or decrypts the data of a message.  CIPHER is the context
     struct for the underlying cipher and F is the encryption function.
     All but the last call for each message _must_ use a length that is
     a multiple of the block size.

 -- Function: void gcm_digest (struct gcm_ctx *CTX, const struct gcm_key
          *KEY, const void *CIPHER, nettle_cipher_func *F, uint8_t
          *DIGEST)
     Extracts the message digest (also known "authentication tag"), and
     writes ‘GCM_DIGEST_SIZE’ octets to DIGEST.

   To encrypt a message using GCM, first initialize a context for the
underlying block cipher with a key to use for encryption.  Then call the
above functions in the following order: ‘gcm_set_key’, ‘gcm_set_iv’,
‘gcm_update’, ‘gcm_encrypt’, ‘gcm_digest’.  The decryption procedure is
analogous, just calling ‘gcm_decrypt’ instead of ‘gcm_encrypt’ (note
that GCM decryption still uses the encryption function of the underlying
block cipher).  To process a new message, using the same key, call
‘gcm_set_iv’ with a new iv.

4.4.2.2 GCM helper macros
.........................

The following macros are defined.

 -- Macro: GCM_CTX (CONTEXT_TYPE)
     This defines an all-in-one context struct, including the context of
     the underlying cipher, the hash sub-key, and the per-message state.
     It expands to
          {
             struct gcm_key key;
             struct gcm_ctx gcm;
             context_type cipher;
          }

   Example use:
     struct gcm_aes128_ctx GCM_CTX(struct aes128_ctx);

   The following macros operate on context structs of this form.

 -- Macro: GCM_SET_KEY (CTX, SET_KEY, ENCRYPT, KEY)
     First argument, CTX, is a context struct as defined by ‘GCM_CTX’.
     SET_KEY and ENCRYPT are functions for setting the encryption key
     and for encrypting data using the underlying cipher.

 -- Macro: GCM_SET_IV (CTX, LENGTH, DATA)
     First argument is a context struct as defined by ‘GCM_CTX’.  LENGTH
     and DATA give the initialization vector (IV).

 -- Macro: GCM_UPDATE (CTX, LENGTH, DATA)
     Simpler way to call ‘gcm_update’.  First argument is a context
     struct as defined by ‘GCM_CTX’

 -- Macro: GCM_ENCRYPT (CTX, ENCRYPT, LENGTH, DST, SRC)
 -- Macro: GCM_DECRYPT (CTX, ENCRYPT, LENGTH, DST, SRC)
 -- Macro: GCM_DIGEST (CTX, ENCRYPT, DIGEST)
     Simpler way to call ‘gcm_encrypt’, ‘gcm_decrypt’ or ‘gcm_digest’.
     First argument is a context struct as defined by ‘GCM_CTX’.  Second
     argument, ENCRYPT, is the encryption function of the underlying
     cipher.

4.4.2.3 GCM-AES interface
.........................

The following functions implement the common case of GCM using AES as
the underlying cipher.
 -- Context struct: struct gcm_aes128_ctx
 -- Context struct: struct gcm_aes192_ctx
 -- Context struct: struct gcm_aes256_ctx
     Context structs, defined using ‘GCM_CTX’.

 -- Function: void gcm_aes128_set_key (struct gcm_aes128_ctx *CTX, const
          uint8_t *KEY)
 -- Function: void gcm_aes192_set_key (struct gcm_aes192_ctx *CTX, const
          uint8_t *KEY)
 -- Function: void gcm_aes256_set_key (struct gcm_aes256_ctx *CTX, const
          uint8_t *KEY)
     Initializes CTX using the given key.

 -- Function: void gcm_aes128_set_iv (struct gcm_aes128_ctx *CTX, size_t
          LENGTH, const uint8_t *IV)
 -- Function: void gcm_aes192_set_iv (struct gcm_aes192_ctx *CTX, size_t
          LENGTH, const uint8_t *IV)
 -- Function: void gcm_aes256_set_iv (struct gcm_aes256_ctx *CTX, size_t
          LENGTH, const uint8_t *IV)
     Initializes the per-message state, using the given IV.

 -- Function: void gcm_aes128_update (struct gcm_aes128_ctx *CTX, size_t
          LENGTH, const uint8_t *DATA)
 -- Function: void gcm_aes192_update (struct gcm_aes192_ctx *CTX, size_t
          LENGTH, const uint8_t *DATA)
 -- Function: void gcm_aes256_update (struct gcm_aes256_ctx *CTX, size_t
          LENGTH, const uint8_t *DATA)
     Provides associated data to be authenticated.  If used, must be
     called before ‘gcm_aes_encrypt’ or ‘gcm_aes_decrypt’.  All but the
     last call for each message _must_ use a length that is a multiple
     of the block size.

 -- Function: void gcm_aes128_encrypt (struct gcm_aes128_ctx *CTX,
          size_t LENGTH, uint8_t *DST, const uint8_t *SRC)
 -- Function: void gcm_aes192_encrypt (struct gcm_aes192_ctx *CTX,
          size_t LENGTH, uint8_t *DST, const uint8_t *SRC)
 -- Function: void gcm_aes256_encrypt (struct gcm_aes256_ctx *CTX,
          size_t LENGTH, uint8_t *DST, const uint8_t *SRC)
 -- Function: void gcm_aes128_decrypt (struct gcm_aes128_ctx *CTX,
          size_t LENGTH, uint8_t *DST, const uint8_t *SRC)
 -- Function: void gcm_aes192_decrypt (struct gcm_aes192_ctx *CTX,
          size_t LENGTH, uint8_t *DST, const uint8_t *SRC)
 -- Function: void gcm_aes256_decrypt (struct gcm_aes256_ctx *CTX,
          size_t LENGTH, uint8_t *DST, const uint8_t *SRC)
     Encrypts or decrypts the data of a message.  All but the last call
     for each message _must_ use a length that is a multiple of the
     block size.

 -- Function: void gcm_aes128_digest (struct gcm_aes128_ctx *CTX,
          uint8_t *DIGEST)
 -- Function: void gcm_aes192_digest (struct gcm_aes192_ctx *CTX,
          uint8_t *DIGEST)
 -- Function: void gcm_aes256_digest (struct gcm_aes256_ctx *CTX,
          uint8_t *DIGEST)
     Extracts the message digest (also known "authentication tag"), and
     writes ‘GCM_DIGEST_SIZE’ octets to DIGEST.

4.4.2.4 GCM-Camellia interface
..............................

The following functions implement the case of GCM using Camellia as the
underlying cipher.

 -- Context struct: struct gcm_camellia128_ctx
 -- Context struct: struct gcm_camellia256_ctx
     Context structs, defined using ‘GCM_CTX’.

 -- Function: void gcm_camellia128_set_key (struct gcm_camellia128_ctx
          *CTX, const uint8_t *KEY)
 -- Function: void gcm_camellia256_set_key (struct gcm_camellia256_ctx
          *CTX, const uint8_t *KEY)
     Initializes CTX using the given key.

 -- Function: void gcm_camellia128_set_iv (struct gcm_camellia128_ctx
          *CTX, size_t LENGTH, const uint8_t *IV)
 -- Function: void gcm_camellia256_set_iv (struct gcm_camellia256_ctx
          *CTX, size_t LENGTH, const uint8_t *IV)
     Initializes the per-message state, using the given IV.

 -- Function: void gcm_camellia128_update (struct gcm_camellia128_ctx
          *CTX, size_t LENGTH, const uint8_t *DATA)
 -- Function: void gcm_camellia256_update (struct gcm_camellia256_ctx
          *CTX, size_t LENGTH, const uint8_t *DATA)
     Provides associated data to be authenticated.  If used, must be
     called before ‘gcm_camellia_encrypt’ or ‘gcm_camellia_decrypt’.
     All but the last call for each message _must_ use a length that is
     a multiple of the block size.

 -- Function: void gcm_camellia128_encrypt (struct gcm_camellia128_ctx
          *CTX, size_t LENGTH, uint8_t *DST, const uint8_t *SRC)
 -- Function: void gcm_camellia256_encrypt (struct gcm_camellia256_ctx
          *CTX, size_t LENGTH, uint8_t *DST, const uint8_t *SRC)
 -- Function: void gcm_camellia128_decrypt (struct gcm_camellia128_ctx
          *CTX, size_t LENGTH, uint8_t *DST, const uint8_t *SRC)
 -- Function: void gcm_camellia256_decrypt (struct gcm_camellia256_ctx
          *CTX, size_t LENGTH, uint8_t *DST, const uint8_t *SRC)
     Encrypts or decrypts the data of a message.  All but the last call
     for each message _must_ use a length that is a multiple of the
     block size.

 -- Function: void gcm_camellia128_digest (struct gcm_camellia128_ctx
          *CTX, uint8_t *DIGEST)
 -- Function: void gcm_camellia192_digest (struct gcm_camellia192_ctx
          *CTX, uint8_t *DIGEST)
 -- Function: void gcm_camellia256_digest (struct gcm_camellia256_ctx
          *CTX, uint8_t *DIGEST)
 -- Function: void gcm_camellia_digest (struct gcm_camellia_ctx *CTX,
          uint8_t *DIGEST)
     Extracts the message digest (also known "authentication tag"), and
     writes ‘GCM_DIGEST_SIZE’ octets to DIGEST.

4.4.2.5 GCM-SM4 interface
.........................

The following functions implement the case of GCM using SM4 as the
underlying cipher.

 -- Context struct: struct gcm_sm4_ctx
     Context structs, defined using ‘GCM_CTX’.

 -- Function: void gcm_sm4_set_key (struct gcm_sm4_ctx *CTX, const
          uint8_t *KEY)
     Initializes CTX using the given key.

 -- Function: void gcm_sm4_set_iv (struct gcm_sm4_ctx *CTX, size_t
          LENGTH, const uint8_t *IV)
     Initializes the per-message state, using the given IV.

 -- Function: void gcm_sm4_update (struct gcm_sm4_ctx *CTX, size_t
          LENGTH, const uint8_t *DATA)
     Provides associated data to be authenticated.  If used, must be
     called before ‘gcm_sm4_encrypt’ or ‘gcm_sm4_decrypt’.  All but the
     last call for each message _must_ use a length that is a multiple
     of the block size.

 -- Function: void gcm_sm4_encrypt (struct gcm_sm4_ctx *CTX, size_t
          LENGTH, uint8_t *DST, const uint8_t *SRC)
 -- Function: void gcm_sm4_decrypt (struct gcm_sm4_ctx *CTX, size_t
          LENGTH, uint8_t *DST, const uint8_t *SRC)
     Encrypts or decrypts the data of a message.  All but the last call
     for each message _must_ use a length that is a multiple of the
     block size.

 -- Function: void gcm_sm4_digest (struct gcm_sm4_ctx *CTX, uint8_t
          *DIGEST)
     Extracts the message digest (also known "authentication tag"), and
     writes ‘GCM_DIGEST_SIZE’ octets to DIGEST.


File: nettle.info,  Node: CCM,  Next: ChaCha-Poly1305,  Prev: GCM,  Up: Authenticated encryption

4.4.3 Counter with CBC-MAC mode
-------------------------------

CCM mode is a combination of counter mode with message authentication
based on cipher block chaining, the same building blocks as EAX, *note
EAX::.  It is constructed on top of a block cipher which must have a
block size of 128 bits.  CCM mode is recommended by NIST in NIST Special
Publication 800-38C
(https://csrc.nist.gov/publications/nistpubs/800-38C/SP800-38C_updated-July20_2007.pdf).
Nettle's support for CCM consists of a low-level general interface, a
message encryption and authentication interface, and specific functions
for CCM using AES as the underlying block cipher.  These interfaces are
defined in ‘<nettle/ccm.h>’.

   In CCM, the length of the message must be known before processing.
The maximum message size depends on the size of the nonce, since the
message size is encoded in a field which must fit in a single block,
together with the nonce and a flag byte.  E.g., with a nonce size of 12
octets, there are three octets left for encoding the message length, the
maximum message length is 2^24 - 1 octets.

   CCM mode encryption operates as follows:
   • The nonce and message length are concatenated to create ‘B_0 =
     flags | nonce | mlength’

   • The authenticated data and plaintext is formatted into the string
     ‘B = L(adata) | adata | padding | plaintext | padding’ with
     ‘padding’ being the shortest string of zero bytes such that the
     length of the string is a multiple of the block size, and
     ‘L(adata)’ is an encoding of the length of ‘adata’.

   • The string ‘B’ is separated into blocks ‘B_1’ ...  ‘B_n’
   • The authentication tag ‘T’ is calculated as ‘T=0, for i=0 to n, do
     T = E_k(B_i XOR T)’

   • An initial counter is then initialized from the nonce to create ‘IC
     = flags | nonce | padding’, where ‘padding’ is the shortest string
     of zero bytes such that ‘IC’ is exactly one block in length.

   • The authentication tag is encrypted using using CTR mode: ‘MAC =
     E_k(IC) XOR T’.  The tag size must be even, at least 4, and at most
     16.  The intended tag size is encoded into ‘IC’ via the ‘flags’
     field.

   • The plaintext is then encrypted using CTR mode with an initial
     counter of ‘IC+1’.

   CCM mode decryption operates similarly, except that the ciphertext
and MAC are first decrypted using CTR mode to retrieve the plaintext and
authentication tag.  The authentication tag can then be recalculated
from the authenticated data and plaintext, and compared to the value in
the message to check for authenticity.

4.4.3.1 General CCM interface
.............................

For all of the functions in the CCM interface, CIPHER is the context
struct for the underlying cipher and F is the encryption function.  The
cipher's encryption key must be set before calling any of the CCM
functions.  The cipher's decryption function and key are never used.

 -- Context struct: struct ccm_ctx
     Holds state corresponding to a particular message.

 -- Constant: CCM_BLOCK_SIZE
     CCM's block size, 16.

 -- Constant: CCM_DIGEST_SIZE
     Recommended size of the CCM digest, 16.

 -- Constant: CCM_MIN_DIGEST_SIZE
     Smallest size of the CCM digest, 4.

 -- Constant: CCM_MIN_NONCE_SIZE
 -- Constant: CCM_MAX_NONCE_SIZE
     The the minimum and maximum sizes for an CCM nonce, 7 and 14,
     respectively.

 -- Macro: CCM_MAX_MSG_SIZE (NONCE_SIZE)
     The largest allowed plaintext length, when using CCM with a nonce
     of the given size.

 -- Function: void ccm_set_nonce (struct ccm_ctx *CTX, const void
          *CIPHER, nettle_cipher_func *F, size_t NONCELEN, const uint8_t
          *NONCE, size_t AUTHLEN, size_t MSGLEN, size_t TAGLEN)
     Initializes CTX using the given nonce and the sizes of the
     authenticated data, message, and MAC to be processed.

 -- Function: void ccm_update (struct ccm_ctx *CTX, const void *CIPHER,
          nettle_cipher_func *F, size_t LENGTH, const uint8_t *DATA)
     Provides associated data to be authenticated.  Must be called after
     ‘ccm_set_nonce’, and before ‘ccm_encrypt’, ‘ccm_decrypt’, or
     ‘ccm_digest’.

 -- Function: void ccm_encrypt (struct ccm_ctx *CTX, const void *CIPHER,
          nettle_cipher_func *F, size_t LENGTH, uint8_t *DST, const
          uint8_t *SRC)
 -- Function: void ccm_decrypt (struct ccm_ctx *CTX, const void *CIPHER,
          nettle_cipher_func *F, size_t LENGTH, uint8_t *DST, const
          uint8_t *SRC)
     Encrypts or decrypts the message data.  Must be called after
     ‘ccm_set_nonce’ and before ‘ccm_digest’.  All but the last call for
     each message _must_ use a length that is a multiple of the block
     size.

 -- Function: void ccm_digest (struct ccm_ctx *CTX, const void *CIPHER,
          nettle_cipher_func *F, uint8_t *DIGEST)
     Extracts the message digest (also known "authentication tag").
     This is the final operation when processing a message.  It writes
     TAGLEN octets to the DIGEST area, where TAGLEN is the parameter
     supplied to ‘ccm_set_nonce’ earlier.  A buffer of size
     ‘CCM_DIGEST_SIZE’, i.e., 16, is always sufficient.

   To encrypt a message using the general CCM interface, set the message
nonce and length using ‘ccm_set_nonce’ and then call ‘ccm_update’ to
generate the digest of any authenticated data.  After all of the
authenticated data has been digested use ‘ccm_encrypt’ to encrypt the
plaintext.  Finally, use ‘ccm_digest’ to return the encrypted MAC.

   To decrypt a message, use ‘ccm_set_nonce’ and ‘ccm_update’ the same
as you would for encryption, and then call ‘ccm_decrypt’ to decrypt the
ciphertext.  After decrypting the ciphertext ‘ccm_digest’ will return
the encrypted MAC which should be identical to the MAC in the received
message.

4.4.3.2 CCM message interface
.............................

The CCM message functions provides a simple interface that will perform
authentication and message encryption in a single function call.  The
length of the cleartext is given by MLENGTH and the length of the
ciphertext is given by CLENGTH, always exactly TLENGTH bytes longer than
the corresponding plaintext.  The length argument passed to a function
is always the size for the result, CLENGTH for the encryption functions,
and MLENGTH for the decryption functions.

 -- Function: void ccm_encrypt_message (const void *CIPHER,
          nettle_cipher_func *F, size_t NLENGTH, const uint8_t *NONCE,
          size_t ALENGTH, const uint8_t *ADATA, size_t TLENGTH, size_t
          CLENGTH, uint8_t *DST, const uint8_t *SRC)
     Computes the message digest from the ADATA and SRC parameters,
     encrypts the plaintext from SRC, appends the encrypted MAC to
     ciphertext and outputs it to DST.

 -- Function: int ccm_decrypt_message (const void *CIPHER,
          nettle_cipher_func *F, size_t NLENGTH, const uint8_t *NONCE,
          size_t ALENGTH, const uint8_t *ADATA, size_t TLENGTH, size_t
          MLENGTH, uint8_t *DST, const uint8_t *SRC)
     Decrypts the ciphertext from SRC, outputs the plaintext to DST,
     recalculates the MAC from ADATA and the plaintext, and compares it
     to the final TLENGTH bytes of SRC.  If the values of the received
     and calculated MACs are equal, this will return 1 indicating a
     valid and authenticated message.  Otherwise, this function will
     return zero.

4.4.3.3 CCM-AES interface
.........................

The AES CCM functions provide an API for using CCM mode with the AES
block ciphers.  The parameters all have the same meaning as the general
and message interfaces, except that the CIPHER, F, and CTX parameters
are replaced with an AES context structure, and a set-key function must
be called before using any of the other functions in this interface.

 -- Context struct: struct ccm_aes128_ctx
     Holds state corresponding to a particular message encrypted using
     the AES-128 block cipher.

 -- Context struct: struct ccm_aes192_ctx
     Holds state corresponding to a particular message encrypted using
     the AES-192 block cipher.

 -- Context struct: struct ccm_aes256_ctx
     Holds state corresponding to a particular message encrypted using
     the AES-256 block cipher.

 -- Function: void ccm_aes128_set_key (struct ccm_aes128_ctx *CTX, const
          uint8_t *KEY)
 -- Function: void ccm_aes192_set_key (struct ccm_aes192_ctx *CTX, const
          uint8_t *KEY)
 -- Function: void ccm_aes256_set_key (struct ccm_aes256_ctx *CTX, const
          uint8_t *KEY)
     Initializes the encryption key for the AES block cipher.  One of
     these functions must be called before any of the other functions in
     the AES CCM interface.

 -- Function: void ccm_aes128_set_nonce (struct ccm_aes128_ctx *CTX,
          size_t NONCELEN, const uint8_t *NONCE, size_t AUTHLEN, size_t
          MSGLEN, size_t TAGLEN)
 -- Function: void ccm_aes192_set_nonce (struct ccm_aes192_ctx *CTX,
          size_t NONCELEN, const uint8_t *NONCE, size_t AUTHLEN, size_t
          MSGLEN, size_t TAGLEN)
 -- Function: void ccm_aes256_set_nonce (struct ccm_aes256_ctx *CTX,
          size_t NONCELEN, const uint8_t *NONCE, size_t AUTHLEN, size_t
          MSGLEN, size_t TAGLEN)
     These are identical to ‘ccm_set_nonce’, except that CIPHER, F, and
     CTX are replaced with a context structure.

 -- Function: void ccm_aes128_update (struct ccm_aes128_ctx *CTX, size_t
          LENGTH, const uint8_t *DATA)
 -- Function: void ccm_aes192_update (struct ccm_aes192_ctx *CTX, size_t
          LENGTH, const uint8_t *DATA)
 -- Function: void ccm_aes256_update (struct ccm_aes256_ctx *CTX, size_t
          LENGTH, const uint8_t *DATA)
     These are identical to ‘ccm_update’, except that CIPHER, F, and CTX
     are replaced with a context structure.

 -- Function: void ccm_aes128_encrypt (struct ccm_aes128_ctx *CTX,
          size_t LENGTH, uint8_t *DST, const uint8_t *SRC)
 -- Function: void ccm_aes192_encrypt (struct ccm_aes192_ctx *CTX,
          size_t LENGTH, uint8_t *DST, const uint8_t *SRC)
 -- Function: void ccm_aes256_encrypt (struct ccm_aes256_ctx *CTX,
          size_t LENGTH, uint8_t *DST, const uint8_t *SRC)
 -- Function: void ccm_aes128_decrypt (struct ccm_aes128_ctx *CTX,
          size_t LENGTH, uint8_t *DST, const uint8_t *SRC)
 -- Function: void ccm_aes192_decrypt (struct ccm_aes192_ctx *CTX,
          size_t LENGTH, uint8_t *DST, const uint8_t *SRC)
 -- Function: void ccm_aes256_decrypt (struct ccm_aes256_ctx *CTX,
          size_t LENGTH, uint8_t *DST, const uint8_t *SRC)
     These are identical to ‘ccm_encrypt’ and ‘ccm_decrypt’, except that
     CIPHER, F, and CTX are replaced with a context structure.

 -- Function: void ccm_aes128_digest (struct ccm_aes128_ctx *CTX,
          uint8_t *DIGEST)
 -- Function: void ccm_aes192_digest (struct ccm_aes192_ctx *CTX,
          uint8_t *DIGEST)
 -- Function: void ccm_aes256_digest (struct ccm_aes256_ctx *CTX,
          uint8_t *DIGEST)
     These are identical to ‘ccm_digest’, except that CIPHER, F, and CTX
     are replaced with a context structure.  The number of octets
     written to the DIGEST area is determined by the TAGLEN parameter
     supplied to the corresponding ‘_set_nonce’ function earlier.

 -- Function: void ccm_aes128_encrypt_message (const struct aes128_ctx
          *CIPHER, size_t NLENGTH, const uint8_t *NONCE, size_t ALENGTH,
          const uint8_t *ADATA, size_t TLENGTH, size_t CLENGTH, uint8_t
          *DST, const uint8_t *SRC)
 -- Function: void ccm_aes192_encrypt_message (const struct aes192_ctx
          *CIPHER, size_t NLENGTH, const uint8_t *NONCE, size_t ALENGTH,
          const uint8_t *ADATA, size_t TLENGTH, size_t CLENGTH, uint8_t
          *DST, const uint8_t *SRC)
 -- Function: void ccm_aes256_encrypt_message (const struct aes256_ctx
          *CIPHER, size_t NLENGTH, const uint8_t *NONCE, size_t ALENGTH,
          const uint8_t *ADATA, size_t TLENGTH, size_t CLENGTH, uint8_t
          *DST, const uint8_t *SRC)
 -- Function: int ccm_aes128_decrypt_message (const struct aes128_ctx
          *CIPHER, size_t NLENGTH, const uint8_t *NONCE, size_t ALENGTH,
          const uint8_t *ADATA, size_t TLENGTH, size_t MLENGTH, uint8_t
          *DST, const uint8_t *SRC)
 -- Function: int ccm_aes192_decrypt_message (const struct aes192_ctx
          *CIPHER, size_t NLENGTH, const uint8_t *NONCE, size_t ALENGTH,
          const uint8_t *ADATA, size_t TLENGTH, size_t MLENGTH, uint8_t
          *DST, const uint8_t *SRC)
 -- Function: int ccm_aes256_decrypt_message (const struct aes256_ctx
          *CIPHER, size_t NLENGTH, const uint8_t *NONCE, size_t ALENGTH,
          const uint8_t *ADATA, size_t TLENGTH, size_t MLENGTH, uint8_t
          *DST, const uint8_t *SRC)
     These are identical to ‘ccm_encrypt_message’ and
     ‘ccm_decrypt_message’ except that CIPHER is an AES context and the
     encryption function F is implied.


File: nettle.info,  Node: ChaCha-Poly1305,  Next: OCB,  Prev: CCM,  Up: Authenticated encryption

4.4.4 ChaCha-Poly1305
---------------------

ChaCha-Poly1305 is a combination of the ChaCha stream cipher and the
poly1305 message authentication code (*note Poly1305::).  It originates
from the NaCl cryptographic library by D. J. Bernstein et al, which
defines a similar construction but with Salsa20 instead of ChaCha.

   Nettle's implementation of ChaCha-Poly1305 follows ‘RFC 8439’, where
the ChaCha cipher is initialized with a 12-byte nonce and a 4-byte block
counter.  This allows up to 256 gigabytes of data to be encrypted using
the same key and nonce.

   For ChaCha-Poly1305, the ChaCha cipher is initialized with a key, of
256 bits, and a per-message nonce.  The first block of the key stream
(counter all zero) is set aside for the authentication subkeys.  Of this
64-octet block, the first 16 octets specify the poly1305 evaluation
point, and the next 16 bytes specify the value to add in for the final
digest.  The final 32 bytes of this block are unused.  Note that unlike
poly1305-aes, the evaluation point depends on the nonce.  This is
preferable, because it leaks less information in case the attacker for
some reason is lucky enough to forge a valid authentication tag, and
observe (from the receiver's behaviour) that the forgery succeeded.

   The ChaCha key stream, starting with counter value 1, is then used to
encrypt the message.  For authentication, poly1305 is applied to the
concatenation of the associated data, the cryptotext, and the lengths of
the associated data and the message, each a 64-bit number (eight octets,
little-endian).  Nettle defines ChaCha-Poly1305 in
‘<nettle/chacha-poly1305.h>’.

 -- Constant: CHACHA_POLY1305_BLOCK_SIZE
     Same as the ChaCha block size, 64.

 -- Constant: CHACHA_POLY1305_KEY_SIZE
     ChaCha-Poly1305 key size, 32.

 -- Constant: CHACHA_POLY1305_NONCE_SIZE
     ChaCha-Poly1305 nonce size, 12.

 -- Constant: CHACHA_POLY1305_DIGEST_SIZE
     Digest size, 16.

 -- Context struct: struct chacha_poly1305_ctx

 -- Function: void chacha_poly1305_set_key (struct chacha_poly1305_ctx
          *CTX, const uint8_t *KEY)
     Initializes CTX using the given key.  Before using the context, you
     _must_ also call ‘chacha_poly1305_set_nonce’, see below.

 -- Function: void chacha_poly1305_set_nonce (struct chacha_poly1305_ctx
          *CTX, const uint8_t *NONCE)
     Initializes the per-message state, using the given nonce.

 -- Function: void chacha_poly1305_update (struct chacha_poly1305_ctx
          *CTX, size_t LENGTH, const uint8_t *DATA)
     Process associated data for authentication.

 -- Function: void chacha_poly1305_encrypt (struct chacha_poly1305_ctx
          *CTX, size_t LENGTH, uint8_t *DST, const uint8_t *SRC)
 -- Function: void chacha_poly1305_decrypt (struct chacha_poly1305_ctx
          *CTX, size_t LENGTH, uint8_t *DST, const uint8_t *SRC)
     Encrypts or decrypts the data of a message.  All but the last call
     for each message _must_ use a length that is a multiple of the
     block size.

 -- Function: void chacha_poly1305_digest (struct chacha_poly1305_ctx
          *CTX, uint8_t *DIGEST)
     Extracts the message digest (also known "authentication tag"), and
     writes ‘CHACHA_POLY1305_DIGEST_SIZE’ octets to DIGEST.


File: nettle.info,  Node: OCB,  Next: SIV-CMAC,  Prev: ChaCha-Poly1305,  Up: Authenticated encryption

4.4.5 OCB (Offset Code Book) Mode
---------------------------------

The OCB mode is an AEAD construction, featuring particularly fast and
simple authentication; it needs one block cipher operation per data
block, and almost free authentication.  It is constructed on top of a
block cipher which must have a block size of 128 bits.

   There have been several versions of the OCB scheme, the
implementation in Nettle follows ‘RFC 7253’, which is almost the same as
the scheme OCB3.

4.4.5.1 General interface
.........................

 -- Context struct: struct ocb_key
     OCB state which depends only on the key, but not on the nonce or
     the message.

 -- Context struct: struct ocb_ctx
     Holds state corresponding to a particular message.

 -- Constant: OCB_BLOCK_SIZE
     The block size for OCB's block size, 16.

 -- Constant: OCB_MAX_NONCE_SIZE
     The maximum nonce size for OCB, 15.

 -- Constant: OCB_DIGEST_SIZE
     Recommended size of the OCB authentication tag, 16.

 -- Function: void ocb_set_key (struct ocb_key *KEY, const void *CIPHER,
          nettle_cipher_func *F)
     Initializes the KEY struct.  The CIPHER context must be initialized
     for encryption, and F should be the corresponding encryption
     function.

 -- Function: void ocb_set_nonce (struct ocb_ctx *CTX, const void
          *CIPHER, nettle_cipher_func *F, size_t TAG_LENGTH, size_t
          NONCE_LENGTH, const uint8_t *NONCE)
     Initializes CTX for processing a new message, using the given
     nonce.  The CIPHER must be initialized for encryption, and F should
     be the corresponding encryption function.  The TAG_LENGTH
     (non-zero, and at most 16) is included when initializing the state.
     Nonce is optional, and length at most 15 bytes.

 -- Function: void ocb_update (struct ocb_ctx *CTX, const struct ocb_key
          *KEY, const void *CIPHER, nettle_cipher_func *F, size_t
          LENGTH, const uint8_t *DATA)
     Process associated data for authentication.  All but the last call
     for each message _must_ use a length that is a multiple of the
     block size.

 -- Function: void ocb_encrypt (struct ocb_ctx *CTX, const struct
          ocb_key *KEY, const void *CIPHER, nettle_cipher_func *F,
          size_t LENGTH, uint8_t *DST, const uint8_t *SRC)
     Encrypts the data of a message.  CIPHER is the context struct for
     the underlying cipher and F is the encryption function.  All but
     the last call for each message _must_ use a length that is a
     multiple of the block size.

 -- Function: void ocb_decrypt (struct ocb_ctx *CTX, const struct
          ocb_key *KEY, const void *ENCRYPT_CTX, nettle_cipher_func
          *ENCRYPT, const void *DECRYPT_CTX, nettle_cipher_func
          *DECRYPT, size_t LENGTH, uint8_t *DST, const uint8_t *SRC)
     Decrypts the data of a message.  ENCRYPT_CTX and ENCRYPT define the
     encryption operation of the underlying cipher, while DECRYPT_CTX
     and DECRYPT represent the decryption operation (for some ciphers,
     one of context pointer and function pointer may be the same).  All
     but the last call for each message _must_ use a length that is a
     multiple of the block size.

 -- Function: void ocb_digest (const struct ocb_ctx *CTX, const struct
          ocb_key *KEY, const void *CIPHER, nettle_cipher_func *F,
          uint8_t *DIGEST)
     Extracts the message digest (also known "authentication tag").
     This is the final operation when processing a message.  It writes
     TAG_LENGTH octets to the DIGEST area, where TAG_LENGTH is the
     parameter supplied to ‘ocb_set_nonce’ earlier.  A buffer of size
     ‘OCB_DIGEST_SIZE’, i.e., 16, is always sufficient.

 -- Function: void ocb_encrypt_message (const struct ocb_key *OCB_KEY,
          const void *CIPHER, nettle_cipher_func *F, size_t NLENGTH,
          const uint8_t *NONCE, size_t ALENGTH, const uint8_t *ADATA,
          size_t TLENGTH, size_t CLENGTH, uint8_t *DST, const uint8_t
          *SRC)
     Computes the message digest from the ADATA and SRC parameters,
     encrypts the plaintext from SRC, appends the tag to the ciphertext
     and writes it to DST.  The CLENGTH variable must be equal to the
     length of SRC plus TLENGTH.

 -- Function: int ocb_decrypt_message (const struct ocb_key *OCB_KEY,
          const void *ENCRYPT_CTX, nettle_cipher_func *ENCRYPT, const
          void *DECRYPT_CTX, nettle_cipher_func *DECRYPT, size_t
          NLENGTH, const uint8_t *NONCE, size_t ALENGTH, const uint8_t
          *ADATA, size_t TLENGTH, size_t MLENGTH, uint8_t *DST, const
          uint8_t *SRC)
     Decrypts the ciphertext from SRC, outputs the plaintext to DST.
     Like ‘ocb_decrypt’, it needs both the encrypt and the decrypt
     function of the underlying cipher.  It also recalculates the
     authentication tag from ADATA and the plaintext, and compares it to
     the final TLENGTH bytes of SRC.  If the values of the received and
     calculated tags are equal, this will return 1 indicating a valid
     and authenticated message.  Otherwise, this function will return
     zero.

4.4.5.2 OCB-AES interface
.........................

 -- Context struct: struct ocb_aes128_encrypt_key
     Key-dependent state for encryption using OCB-AES128.  For
     decryption, a separate ‘struct aes128_ctx’, initialized for
     decryption, is needed as well.

 -- Function: void ocb_aes128_set_encrypt_key (struct
          ocb_aes128_encrypt_key *OCB, const uint8_t *KEY)
     Initializes OCB and the underlying AES cipher with the given key.

 -- Function: void ocb_aes128_set_decrypt_key (struct
          ocb_aes128_encrypt_key *OCB, struct aes128_ctx *DECRYPT, const
          uint8_t *KEY)
     Initializes OCB and the underlying AES cipher with the given key.
     In addition, initialize DECRYPT for decryption using the same key;
     this is needed for ‘ocb_aes128_decrypt’ and
     ‘ocb_aes128_decrypt_message’.

 -- Function: void ocb_aes128_set_nonce (struct ocb_ctx *CTX, const
          struct ocb_aes128_encrypt_key *KEY, size_t TAG_LENGTH, size_t
          NONCE_LENGTH, const uint8_t *NONCE)
     Initializes CTX for processing a new message, using the given nonce
     and key.  The TAG_LENGTH (non-zero, and at most 16) is included
     when initializing the state, and should be the same value later
     passed to ‘ocb_digest’.  Nonce is optional, and length at most 15
     bytes.

 -- Function: void ocb_aes128_update (struct ocb_ctx *CTX, const struct
          ocb_aes128_encrypt_key *KEY, size_t LENGTH, const uint8_t
          *DATA)
     Process associated data for authentication.  All but the last call
     for each message _must_ use a length that is a multiple of the
     block size.

 -- Function: void ocb_aes128_encrypt (struct ocb_ctx *CTX, const struct
          ocb_aes128_encrypt_key *KEY, size_t LENGTH, uint8_t *DST,
          const uint8_t *SRC)
     Encrypts the data of a message.  All but the last call for each
     message _must_ use a length that is a multiple of the block size.

 -- Function: void ocb_aes128_decrypt (struct ocb_ctx *CTX, const struct
          ocb_aes128_encrypt_key *KEY, const struct aes128_ctx *DECRYPT,
          size_t LENGTH, uint8_t *DST, const uint8_t *SRC)
     Decrypts the data of a message.  DECRYPT is an AES context
     initialized for decryption using the same key.  All but the last
     call for each message _must_ use a length that is a multiple of the
     block size.

 -- Function: void ocb_aes128_digest (struct ocb_ctx *CTX, const struct
          ocb_aes128_encrypt_key *KEY, uint8_t *DIGEST)
     Extracts the message digest (also known "authentication tag").
     This is the final operation when processing a message.  The number
     of octets written to the DIGEST area is determined by the
     TAG_LENGTH parameter supplied to the ‘ocb_aes128_set_nonce’
     function earlier.

 -- Function: void ocb_aes128_encrypt_message (const struct
          ocb_aes128_encrypt_key *KEY, size_t NLENGTH, const uint8_t
          *NONCE, size_t ALENGTH, const uint8_t *ADATA, size_t TLENGTH,
          size_t CLENGTH, uint8_t *DST, const uint8_t *SRC)
     Computes the message digest from the ADATA and SRC parameters,
     encrypts the plaintext from SRC, appends the tag to the ciphertext
     and writes it to DST.  The CLENGTH variable must be equal to the
     length of SRC plus TLENGTH.

 -- Function: int ocb_aes128_decrypt_message (const struct
          ocb_aes128_encrypt_key *KEY, const struct aes128_ctx *DECRYPT,
          size_t NLENGTH, const uint8_t *NONCE, size_t ALENGTH, const
          uint8_t *ADATA, size_t TLENGTH, size_t MLENGTH, uint8_t *DST,
          const uint8_t *SRC)
     Decrypts the ciphertext from SRC, outputs the plaintext to DST.
     Like ‘ocb_aes128_decrypt’, it needs an AES context initialized for
     decryption using the same key.  It also recalculates the
     authentication tag from ADATA and the plaintext, and compares it to
     the final TLENGTH bytes of SRC.  If the values of the received and
     calculated tags are equal, this will return 1 indicating a valid
     and authenticated message.  Otherwise, this function will return
     zero.


File: nettle.info,  Node: SIV-CMAC,  Next: SIV-GCM,  Prev: OCB,  Up: Authenticated encryption

4.4.6 Synthetic Initialization Vector AEAD
------------------------------------------

SIV-CMAC mode is a combination of counter mode with message
authentication based on CMAC.  Unlike other counter AEAD modes, it
provides protection against accidental nonce misuse, making it a good
choice for stateless-servers that cannot ensure nonce uniqueness.  It is
constructed on top of a block cipher which must have a block size of 128
bits.  Nettle's support for SIV-CMAC consists of a message encryption
and authentication interface, for SIV-CMAC using AES as the underlying
block cipher.  When a nonce is re-used with this mode, message
authenticity is retained however an attacker can determine whether the
same plaintext was protected with the two messages sharing the nonce.
These interfaces are defined in ‘<nettle/siv-cmac.h>’.

   Unlike other AEAD mode in SIV-CMAC the initialization vector serves
as the tag.  That means that in the generated ciphertext the tag
precedes the ciphertext.

   Note also, that the SIV-CMAC algorithm, as specified in ‘RFC 5297’,
introduces the notion of authenticated data which consist of multiple
components.  For example with SIV-CMAC the authentication tag of data
‘X’ followed by ‘Y’, is different than the concatenated data ‘X || Y’.
The interfaces described below follow the AEAD paradigm and do not allow
access to this feature and also require the use of a non-empty nonce.
In the terminology of the RFC, the input to the S2V function is always a
vector of three elements, where S1 is the authenticated data, S2 is the
nonce, and S3 is the plaintext.

4.4.6.1 General interface
.........................

 -- Constant: SIV_BLOCK_SIZE
     SIV-CMAC's block size, 16.

 -- Constant: SIV_DIGEST_SIZE
     Size of the SIV-CMAC digest or initialization vector, 16.

 -- Constant: SIV_MIN_NONCE_SIZE
     The the minimum size for an SIV-CMAC nonce, 1.

4.4.6.2 SIV-CMAC-AES interface
..............................

The AES SIV-CMAC functions provide an API for using SIV-CMAC mode with
the AES block ciphers.  The parameters all have the same meaning as the
general and message interfaces, except that the CIPHER, F, and CTX
parameters are replaced with an AES context structure, and a set-key
function must be called before using any of the other functions in this
interface.

 -- Context struct: struct siv_cmac_aes128_ctx
     Holds state corresponding to a particular message encrypted using
     the AES-128 block cipher.

 -- Context struct: struct siv_cmac_aes256_ctx
     Holds state corresponding to a particular message encrypted using
     the AES-256 block cipher.

 -- Function: void siv_cmac_aes128_set_key (struct siv_cmac_aes128_ctx
          *CTX, const uint8_t *KEY)
 -- Function: void siv_cmac_aes256_set_key (struct siv_cmac_aes256_ctx
          *CTX, const uint8_t *KEY)
     Initializes the encryption key for the AES block cipher.  One of
     these functions must be called before any of the other functions in
     the AES SIV-CMAC interface.

 -- Function: void siv_cmac_aes128_encrypt_message (struct
          siv_cmac_aes128_ctx *CTX, size_t NLENGTH, const uint8_t
          *NONCE, size_t ALENGTH, const uint8_t *ADATA, size_t CLENGTH,
          uint8_t *DST, const uint8_t *SRC)
 -- Function: void siv_cmac_aes256_encrypt_message (struct
          siv_cmac_aes256_ctx *CTX, size_t NLENGTH, const uint8_t
          *NONCE, size_t ALENGTH, const uint8_t *ADATA, size_t CLENGTH,
          uint8_t *DST, const uint8_t *SRC)
     Computes the message digest from the ADATA and SRC parameters,
     encrypts the plaintext from SRC, prepends the initialization vector
     to the ciphertext and outputs it to DST.  The CLENGTH variable must
     be equal to the length of SRC plus ‘SIV_DIGEST_SIZE’.

 -- Function: int siv_cmac_aes128_decrypt_message (struct
          siv_cmac_aes128_ctx *CTX, size_t NLENGTH, const uint8_t
          *NONCE, size_t ALENGTH, const uint8_t *ADATA, size_t MLENGTH,
          uint8_t *DST, const uint8_t *SRC)
 -- Function: int siv_cmac_aes256_decrypt_message (struct
          siv_cmac_aes128_ctx *CTX, size_t NLENGTH, const uint8_t
          *NONCE, size_t ALENGTH, const uint8_t *ADATA, size_t MLENGTH,
          uint8_t *DST, const uint8_t *SRC)
     Decrypts the ciphertext from SRC, outputs the plaintext to DST,
     recalculates the initialization vector from ADATA and the
     plaintext.  If the values of the received and calculated
     initialization vector are equal, this will return 1 indicating a
     valid and authenticated message.  Otherwise, this function will
     return zero.


File: nettle.info,  Node: SIV-GCM,  Next: nettle_aead abstraction,  Prev: SIV-CMAC,  Up: Authenticated encryption

4.4.7 SIV-GCM
-------------

SIV-GCM, described in ‘RFC 8452’, is an AEAD construction similar to
AES-GCM, but provides protection against accidental nonce misuse like
SIV-CMAC mode.

   It is constructed on top of a block cipher which must have a block
size of 128 bits and a nonce size of 12 bytes.  Nettle's support for
SIV-GCM consists of a message encryption and authentication interface,
for SIV-GCM using AES as the underlying block cipher.  These interfaces
are defined in ‘<nettle/siv-gcm.h>’.

   Unlike other AEAD mode in SIV-GCM the tag is calculated over the
encoded additional authentication data and plaintext instead of the
ciphertext.

4.4.7.1 General interface
.........................

 -- Constant: SIV_GCM_BLOCK_SIZE
     SIV-GCM's block size, 16.

 -- Constant: SIV_GCM_DIGEST_SIZE
     Size of the SIV-GCM digest for tags, 16.

 -- Constant: SIV_GCM_NONCE_SIZE
     Size of the SIV-GCM nonce, 12.

 -- Function: void siv_gcm_encrypt_message (const struct nettle_cipher
          *NC, const void *CTX, void *CTR_CTX, size_t NLENGTH, const
          uint8_t *NONCE, size_t ALENGTH, const uint8_t *ADATA, size_t
          CLENGTH, uint8_t *DST, const uint8_t *SRC)
     Computes the message digest from the ADATA and SRC parameters,
     encrypts the plaintext from SRC, appends the authentication tag to
     the ciphertext and outputs it to DST.  The CLENGTH variable must be
     equal to the length of SRC plus ‘SIV_GCM_DIGEST_SIZE’.

 -- Function: int siv_gcm_decrypt_message (const struct nettle_cipher
          *NC, const void *CTX, void *CTR_CTX, size_t NLENGTH, const
          uint8_t *NONCE, size_t ALENGTH, const uint8_t *ADATA, size_t
          MLENGTH, uint8_t *DST, const uint8_t *SRC)
     Decrypts the ciphertext from SRC, outputs the plaintext to DST,
     recalculates the initialization vector from ADATA and the
     plaintext.  If the values of the received and calculated
     initialization vector are equal, this will return 1 indicating a
     valid and authenticated message.  Otherwise, this function will
     return zero.

   In the above interface, NC must point to a cipher that works with
16-byte block size and the key sizes that are multiple of 8-bytes.  The
CTX context structure must be initialized for encryption mode using a
set-key function, before using any of the functions in this interface.
While the CTR_CTX context structure must have the same size as CTX, it
does not need to be initialized before calling those functions as it is
used as working storage.  These structures can point to the same area;
in that case the contents of *CTX is destroyed by the call.

   For convenience, Nettle provides wrapper functions that works with
AES described in the following section.

4.4.7.2 SIV-GCM-AES interface
.............................

The SIV-GCM functions provide an API for using SIV-GCM mode with the AES
block ciphers.  The parameters all have the same meaning as the general
and message interfaces, except that the CIPHER, F, and CTX parameters
are replaced with an AES context structure.  The AES context structure
must be initialized for encryption mode using a set-key function, before
using any of the functions in this interface.

 -- Function: void siv_gcm_aes128_encrypt_message (const struct
          aes128_ctx *CTX, size_t NLENGTH, const uint8_t *NONCE, size_t
          ALENGTH, const uint8_t *ADATA, size_t CLENGTH, uint8_t *DST,
          const uint8_t *SRC)
 -- Function: void siv_gcm_aes256_encrypt_message (const struct
          aes256_ctx *CTX, size_t NLENGTH, const uint8_t *NONCE, size_t
          ALENGTH, const uint8_t *ADATA, size_t CLENGTH, uint8_t *DST,
          const uint8_t *SRC)
     Computes the message digest from the ADATA and SRC parameters,
     encrypts the plaintext from SRC, appends the authentication tag to
     the ciphertext and outputs it to DST.  The CLENGTH variable must be
     equal to the length of SRC plus ‘SIV_GCM_DIGEST_SIZE’.

 -- Function: int siv_gcm_aes128_decrypt_message (const struct
          aes128_ctx *CTX, size_t NLENGTH, const uint8_t *NONCE, size_t
          ALENGTH, const uint8_t *ADATA, size_t MLENGTH, uint8_t *DST,
          const uint8_t *SRC)
 -- Function: int siv_gcm_aes256_decrypt_message (const struct
          aes256_ctx *CTX, size_t NLENGTH, const uint8_t *NONCE, size_t
          ALENGTH, const uint8_t *ADATA, size_t MLENGTH, uint8_t *DST,
          const uint8_t *SRC)
     Decrypts the ciphertext from SRC, outputs the plaintext to DST,
     recalculates the initialization vector from ADATA and the
     plaintext.  If the values of the received and calculated
     initialization vector are equal, this will return 1 indicating a
     valid and authenticated message.  Otherwise, this function will
     return zero.


File: nettle.info,  Node: nettle_aead abstraction,  Prev: SIV-GCM,  Up: Authenticated encryption

4.4.8 The ‘struct nettle_aead’ abstraction
------------------------------------------

Nettle includes a struct including information about the supported hash
functions.  It is defined in ‘<nettle/nettle-meta.h>’.

 -- Meta struct: struct nettle_aead name context_size block_size
          key_size nonce_size digest_size set_encrypt_key
          set_decrypt_key set_nonce update encrypt decrypt digest
     The last seven attributes are function pointers.

 -- Constant Struct: struct nettle_aead nettle_gcm_aes128
 -- Constant Struct: struct nettle_aead nettle_gcm_aes192
 -- Constant Struct: struct nettle_aead nettle_gcm_aes256
 -- Constant Struct: struct nettle_aead nettle_gcm_camellia128
 -- Constant Struct: struct nettle_aead nettle_gcm_camellia256
 -- Constant Struct: struct nettle_aead nettle_eax_aes128
 -- Constant Struct: struct nettle_aead nettle_chacha_poly1305
     These are most of the AEAD constructions that Nettle implements.
     Note that CCM is missing; it requirement that the message size is
     specified in advance makes it incompatible with the ‘nettle_aead’
     abstraction.

   Nettle also exports a list of all these constructions.

 -- Function: const struct nettle_aead ** nettle_get_aeads (void)
     Returns a NULL-terminated list of pointers to supported
     algorithms.This list can be used to dynamically enumerate or search
     the supported algorithms.

 -- Macro: nettle_aeads
     A macro expanding to a call to nettle_get_aeads.  In earlier
     versions, this was not a macro but the actual array of pointers.


File: nettle.info,  Node: Keyed hash functions,  Next: Key derivation functions,  Prev: Authenticated encryption,  Up: Reference

4.5 Keyed Hash Functions
========================

A “keyed hash function”, or “Message Authentication Code” (MAC) is a
function that takes a key and a message, and produces fixed size MAC.
It should be hard to compute a message and a matching MAC without
knowledge of the key.  It should also be hard to compute the key given
only messages and corresponding MACs.

   Keyed hash functions are useful primarily for message authentication,
when Alice and Bob shares a secret: The sender, Alice, computes the MAC
and attaches it to the message.  The receiver, Bob, also computes the
MAC of the message, using the same key, and compares that to Alice's
value.  If they match, Bob can be assured that the message has not been
modified on its way from Alice.

   However, unlike digital signatures, this assurance is not
transferable.  Bob can't show the message and the MAC to a third party
and prove that Alice sent that message.  Not even if he gives away the
key to the third party.  The reason is that the _same_ key is used on
both sides, and anyone knowing the key can create a correct MAC for any
message.  If Bob believes that only he and Alice knows the key, and he
knows that he didn't attach a MAC to a particular message, he knows it
must be Alice who did it.  However, the third party can't distinguish
between a MAC created by Alice and one created by Bob.

   Keyed hash functions are typically a lot faster than digital
signatures as well.

* Menu:

* HMAC::
* UMAC::
* CMAC::
* Poly1305::


File: nettle.info,  Node: HMAC,  Next: UMAC,  Up: Keyed hash functions

4.5.1 HMAC
----------

One can build keyed hash functions from ordinary hash functions.  Older
constructions simply concatenate secret key and message and hashes that,
but such constructions have weaknesses.  A better construction is HMAC,
described in ‘RFC 2104’.

   For an underlying hash function ‘H’, with digest size ‘l’ and
internal block size ‘b’, HMAC-H is constructed as follows: From a given
key ‘k’, two distinct subkeys ‘k_i’ and ‘k_o’ are constructed, both of
length ‘b’.  The HMAC-H of a message ‘m’ is then computed as ‘H(k_o |
H(k_i | m))’, where ‘|’ denotes string concatenation.

   HMAC keys can be of any length, but it is recommended to use keys of
length ‘l’, the digest size of the underlying hash function ‘H’.  Keys
that are longer than ‘b’ are shortened to length ‘l’ by hashing with
‘H’, so arbitrarily long keys aren't very useful.

   Nettle's HMAC functions are defined in ‘<nettle/hmac.h>’.

4.5.1.1 HMAC-MD5
................

 -- Context struct: struct hmac_md5_ctx

 -- Function: void hmac_md5_set_key (struct hmac_md5_ctx *CTX, size_t
          KEY_LENGTH, const uint8_t *KEY)
     Initializes the context with the key.

 -- Function: void hmac_md5_update (struct hmac_md5_ctx *CTX, size_t
          LENGTH, const uint8_t *DATA)
     Process some more data.

 -- Function: void hmac_md5_digest (struct hmac_md5_ctx *CTX, uint8_t
          *DIGEST)
     Extracts the MAC, writing ‘MD5_DIGEST_SIZE’ octets to DIGEST.

     This function also resets the context for processing new messages,
     with the same key.

4.5.1.2 HMAC-RIPEMD160
......................

 -- Context struct: struct hmac_ripemd160_ctx

 -- Function: void hmac_ripemd160_set_key (struct hmac_ripemd160_ctx
          *CTX, size_t KEY_LENGTH, const uint8_t *KEY)
     Initializes the context with the key.

 -- Function: void hmac_ripemd160_update (struct hmac_ripemd160_ctx
          *CTX, size_t LENGTH, const uint8_t *DATA)
     Process some more data.

 -- Function: void hmac_ripemd160_digest (struct hmac_ripemd160_ctx
          *CTX, uint8_t *DIGEST)
     Extracts the MAC, writing ‘RIPEMD160_DIGEST_SIZE’ octets to DIGEST.

     This function also resets the context for processing new messages,
     with the same key.

4.5.1.3 HMAC-SHA1
.................

 -- Context struct: struct hmac_sha1_ctx

 -- Function: void hmac_sha1_set_key (struct hmac_sha1_ctx *CTX, size_t
          KEY_LENGTH, const uint8_t *KEY)
     Initializes the context with the key.

 -- Function: void hmac_sha1_update (struct hmac_sha1_ctx *CTX, size_t
          LENGTH, const uint8_t *DATA)
     Process some more data.

 -- Function: void hmac_sha1_digest (struct hmac_sha1_ctx *CTX, uint8_t
          *DIGEST)
     Extracts the MAC, writing ‘SHA1_DIGEST_SIZE’ octets to DIGEST.

     This function also resets the context for processing new messages,
     with the same key.

4.5.1.4 HMAC-SHA256
...................

 -- Context struct: struct hmac_sha256_ctx

 -- Function: void hmac_sha256_set_key (struct hmac_sha256_ctx *CTX,
          size_t KEY_LENGTH, const uint8_t *KEY)
     Initializes the context with the key.

 -- Function: void hmac_sha256_update (struct hmac_sha256_ctx *CTX,
          size_t LENGTH, const uint8_t *DATA)
     Process some more data.

 -- Function: void hmac_sha256_digest (struct hmac_sha256_ctx *CTX,
          uint8_t *DIGEST)
     Extracts the MAC, writing ‘SHA256_DIGEST_SIZE’ octets to DIGEST.

     This function also resets the context for processing new messages,
     with the same key.

4.5.1.5 HMAC-SHA512
...................

 -- Context struct: struct hmac_sha512_ctx

 -- Function: void hmac_sha512_set_key (struct hmac_sha512_ctx *CTX,
          size_t KEY_LENGTH, const uint8_t *KEY)
     Initializes the context with the key.

 -- Function: void hmac_sha512_update (struct hmac_sha512_ctx *CTX,
          size_t LENGTH, const uint8_t *DATA)
     Process some more data.

 -- Function: void hmac_sha512_digest (struct hmac_sha512_ctx *CTX,
          uint8_t *DIGEST)
     Extracts the MAC, writing ‘SHA512_DIGEST_SIZE’ octets to DIGEST.

     This function also resets the context for processing new messages,
     with the same key.

4.5.1.6 HMAC-SM3
................

 -- Context struct: struct hmac_sm3_ctx

 -- Function: void hmac_sm3_set_key (struct hmac_sm3_ctx *CTX, size_t
          KEY_LENGTH, const uint8_t *KEY)
     Initializes the context with the key.

 -- Function: void hmac_sm3_update (struct hmac_sm3_ctx *CTX, size_t
          LENGTH, const uint8_t *DATA)
     Process some more data.

 -- Function: void hmac_sm3_digest (struct hmac_sm3_ctx *CTX, uint8_t
          *DIGEST)
     Extracts the MAC, writing ‘SM3_DIGEST_SIZE’ octets to DIGEST.

     This function also resets the context for processing new messages,
     with the same key.


File: nettle.info,  Node: UMAC,  Next: CMAC,  Prev: HMAC,  Up: Keyed hash functions

4.5.2 UMAC
----------

UMAC is a message authentication code based on universal hashing, and
designed for high performance on modern processors (in contrast to GCM,
*Note GCM::, which is designed primarily for hardware performance).  On
processors with good integer multiplication performance, it can be 10
times faster than SHA256 and SHA512.  UMAC is specified in ‘RFC 4418’.

   The secret key is always 128 bits (16 octets).  The key is used as an
encryption key for the AES block cipher.  This cipher is used in counter
mode to generate various internal subkeys needed in UMAC.  Messages are
of arbitrary size, and for each message, UMAC also needs a unique nonce.
Nonce values must not be reused for two messages with the same key, but
they need not be kept secret.

   The nonce must be at least one octet, and at most 16; nonces shorter
than 16 octets are zero-padded.  Nettle's implementation of UMAC
increments the nonce automatically for each message, so explicitly
setting the nonce for each message is optional.  This auto-increment
uses network byte order and it takes the length of the nonce into
account.  E.g., if the initial nonce is "abc" (3 octets), this value is
zero-padded to 16 octets for the first message.  For the next message,
the nonce is incremented to "abd", and this incremented value is
zero-padded to 16 octets.

   UMAC is defined in four variants, for different output sizes: 32 bits
(4 octets), 64 bits (8 octets), 96 bits (12 octets) and 128 bits (16
octets), corresponding to different trade-offs between speed and
security.  Using a shorter output size sometimes (but not always!)
gives the same result as using a longer output size and truncating the
result.  So it is important to use the right variant.  For consistency
with other hash and MAC functions, Nettle's ‘_digest’ functions for UMAC
accept a length parameter so that the output can be truncated to any
desired size, but it is recommended to stick to the specified output
size and select the umac variant corresponding to the desired size.

   The internal block size of UMAC is 1024 octets, and it also generates
more than 1024 bytes of subkeys.  This makes the size of the context
struct quite a bit larger than other hash functions and MAC algorithms
in Nettle.

   Nettle defines UMAC in ‘<nettle/umac.h>’.

 -- Context struct: struct umac32_ctx
 -- Context struct: struct umac64_ctx
 -- Context struct: struct umac96_ctx
 -- Context struct: struct umac128_ctx
     Each UMAC variant uses its own context struct.

 -- Constant: UMAC_KEY_SIZE
     The UMAC key size, 16.
 -- Constant: UMAC_MIN_NONCE_SIZE
 -- Constant: UMAC_MAX_NONCE_SIZE
     The the minimum and maximum sizes for an UMAC nonce, 1 and 16,
     respectively.
 -- Constant: UMAC32_DIGEST_SIZE
     The size of an UMAC32 digest, 4.
 -- Constant: UMAC64_DIGEST_SIZE
     The size of an UMAC64 digest, 8.
 -- Constant: UMAC96_DIGEST_SIZE
     The size of an UMAC96 digest, 12.
 -- Constant: UMAC128_DIGEST_SIZE
     The size of an UMAC128 digest, 16.
 -- Constant: UMAC_BLOCK_SIZE
     The internal block size of UMAC.

 -- Function: void umac32_set_key (struct umac32_ctx *CTX, const uint8_t
          *KEY)
 -- Function: void umac64_set_key (struct umac64_ctx *CTX, const uint8_t
          *KEY)
 -- Function: void umac96_set_key (struct umac96_ctx *CTX, const uint8_t
          *KEY)
 -- Function: void umac128_set_key (struct umac128_ctx *CTX, const
          uint8_t *KEY)
     These functions initialize the UMAC context struct.  They also
     initialize the nonce to zero (with length 16, for auto-increment).

 -- Function: void umac32_set_nonce (struct umac32_ctx *CTX, size_t
          LENGTH, const uint8_t *NONCE)
 -- Function: void umac64_set_nonce (struct umac64_ctx *CTX, size_t
          LENGTH, const uint8_t *NONCE)
 -- Function: void umac96_set_nonce (struct umac96_ctx *CTX, size_t
          LENGTH, const uint8_t *NONCE)
 -- Function: void umac128_set_nonce (struct umac128_ctx *CTX, size_t
          LENGTH, const uint8_t *NONCE)
     Sets the nonce to be used for the next message.  In general, nonces
     should be set before processing of the message.  This is not
     strictly required for UMAC (the nonce only affects the final
     processing generating the digest), but it is nevertheless
     recommended that this function is called _before_ the first
     ‘_update’ call for the message.

 -- Function: void umac32_update (struct umac32_ctx *CTX, size_t LENGTH,
          const uint8_t *DATA)
 -- Function: void umac64_update (struct umac64_ctx *CTX, size_t LENGTH,
          const uint8_t *DATA)
 -- Function: void umac96_update (struct umac96_ctx *CTX, size_t LENGTH,
          const uint8_t *DATA)
 -- Function: void umac128_update (struct umac128_ctx *CTX, size_t
          LENGTH, const uint8_t *DATA)
     These functions are called zero or more times to process the
     message.

 -- Function: void umac32_digest (struct umac32_ctx *CTX, uint8_t
          *DIGEST)
 -- Function: void umac64_digest (struct umac64_ctx *CTX, uint8_t
          *DIGEST)
 -- Function: void umac96_digest (struct umac96_ctx *CTX, uint8_t
          *DIGEST)
 -- Function: void umac128_digest (struct umac128_ctx *CTX, uint8_t
          *DIGEST)
     Extracts the MAC of the message, writing it to DIGEST.  These
     functions reset the context for processing of a new message with
     the same key.  The nonce is incremented as described above, the new
     value is used unless you call the ‘_set_nonce’ function explicitly
     for each message.


File: nettle.info,  Node: CMAC,  Next: Poly1305,  Prev: UMAC,  Up: Keyed hash functions

4.5.3 CMAC
----------

CMAC is a message authentication code based on CBC encryption mode.  It
is suitable for systems where block ciphers are preferrable and perform
better than hash functions.  CMAC-128 is specified in ‘RFC4493’.  The
block size is always 128 bits (16 octets).  CMAC-64 is specified by NIST
Special Publication 800-38B
(https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-38B.pdf).
The block size is always 64 bits (8 octets).

   Nettle provides helper functions for CMAC-128 with the AES block
cipher and for CMAC-64 with the Tripple-DES block cipher.

   Nettle defines CMAC in ‘<nettle/cmac.h>’.

 -- Context struct: struct cmac_aes128_ctx
 -- Context struct: struct cmac_aes256_ctx

 -- Constant: CMAC128_DIGEST_SIZE
     The size of an CMAC-128 digest, 16.

 -- Function: void cmac_aes128_set_key (struct cmac_aes128_ctx *CTX,
          const uint8_t *KEY)
     This function initializes the CMAC context struct for AES-128.

 -- Function: void cmac_aes128_update (struct cmac_aes128_ctx *CTX,
          size_t LENGTH, const uint8_t *DATA)
     This function is called zero or more times to process the message.

 -- Function: void cmac_aes128_digest (struct cmac_aes128_ctx *CTX,
          uint8_t *DIGEST)
     Extracts the MAC of the message, writing ‘CMAC128_DIGEST_SIZE’
     octets to DIGEST.  This function resets the context for processing
     of a new message with the same key.

 -- Function: void cmac_aes256_set_key (struct cmac_aes256_ctx *CTX,
          const uint8_t *KEY)
     This function initializes the CMAC context struct for AES-256.

 -- Function: void cmac_aes256_update (struct cmac_aes256_ctx *CTX,
          size_t LENGTH, const uint8_t *DATA)
     This function is called zero or more times to process the message.

 -- Function: void cmac_aes256_digest (struct cmac_aes256_ctx *CTX,
          uint8_t *DIGEST)
     Extracts the MAC of the message, writing ‘CMAC128_DIGEST_SIZE’
     octets to DIGEST.  This function resets the context for processing
     of a new message with the same key.

 -- Context struct: struct cmac_des3_ctx

 -- Constant: CMAC64_DIGEST_SIZE
     The size of an CMAC-64 digest, 8.

 -- Function: void cmac_des3_set_key (struct cmac_des3_ctx *CTX, const
          uint8_t *KEY)
     This function initializes the CMAC context struct for Tripple-DES.

 -- Function: void cmac_des3_update (struct cmac_des3_ctx *CTX,size_t
          LENGTH, const uint8_t *DATA)
     This function is called zero or more times to process the message.

 -- Function: void cmac_des3_digest (struct cmac_des3_ctx *CTX, uint8_t
          *DIGEST)
     Extracts the MAC of the message, writing ‘CMAC64_DIGEST_SIZE’
     octets to DIGEST.  This function resets the context for processing
     of a new message with the same key.


File: nettle.info,  Node: Poly1305,  Prev: CMAC,  Up: Keyed hash functions

4.5.4 Poly1305
--------------

Poly1305-AES is a message authentication code designed by D. J.
Bernstein.  It treats the message as a polynomial modulo the prime
number 2^130 - 5.

   The key, 256 bits, consists of two parts, where the first half is an
AES-128 key, and the second half specifies the point where the
polynomial is evaluated.  Of the latter half, 22 bits are set to zero,
to enable high-performance implementation, leaving 106 bits for
specifying an evaluation point ‘r’.  For each message, one must also
provide a 128-bit nonce.  The nonce is encrypted using the AES key, and
that's the only thing AES is used for.

   The message is split into 128-bit chunks (with final chunk possibly
being shorter), each read as a little-endian integer.  Each chunk has a
one-bit appended at the high end.  The resulting integers are treated as
polynomial coefficients modulo 2^130 - 5, and the polynomial is
evaluated at the point ‘r’.  Finally, this value is reduced modulo
2^128, and added (also modulo 2^128) to the encrypted nonce, to produce
an 128-bit authenticator for the message.  See
<https://cr.yp.to/mac/poly1305-20050329.pdf> for further details.

   Clearly, variants using a different cipher than AES could be defined.
Another variant is the ChaCha-Poly1305 AEAD construction (*note
ChaCha-Poly1305::).  Nettle defines Poly1305-AES in ‘nettle/poly1305.h’.

 -- Constant: POLY1305_AES_KEY_SIZE
     Key size, 32 octets.

 -- Constant: POLY1305_AES_DIGEST_SIZE
     Size of the digest or "authenticator", 16 octets.

 -- Constant: POLY1305_AES_NONCE_SIZE
     Nonce size, 16 octets.

 -- Context struct: struct poly1305_aes_ctx
     The poly1305-aes context struct.

 -- Function: void poly1305_aes_set_key (struct poly1305_aes_ctx *CTX,
          const uint8_t *KEY)
     Initialize the context struct.  Also sets the nonce to zero.

 -- Function: void poly1305_aes_set_nonce (struct poly1305_aes_ctx *CTX,
          const uint8_t *NONCE)
     Sets the nonce.  Calling this function is optional, since the nonce
     is incremented automatically for each message.

 -- Function: void poly1305_aes_update (struct poly1305_aes_ctx *CTX,
          size_t LENGTH, const uint8_t *DATA)
     Process more data.

 -- Function: void poly1305_aes_digest (struct poly1305_aes_ctx *CTX,
          uint8_t *DIGEST)
     Extracts the digest, writing ‘POLY1305_AES_DIGEST_SIZE’ octets to
     DIGEST.  Also increments the nonce, and prepares the context for
     processing a new message.


File: nettle.info,  Node: Key derivation functions,  Next: Public-key algorithms,  Prev: Keyed hash functions,  Up: Reference

4.6 Key derivation Functions
============================

A “key derivation function” (KDF) is a function that from a given
symmetric key derives other symmetric keys.  A sub-class of KDFs is the
“password-based key derivation functions” (PBKDFs), which take as input
a password or passphrase, and its purpose is typically to strengthen it
and protect against certain pre-computation attacks by using salting and
expensive computation.

4.6.1 HKDF: HMAC-based Extract-and-Expand
-----------------------------------------

HKDF is a key derivation function used as a building block of
higher-level protocols like TLS 1.3.  It is a derivation function based
on HMAC described in ‘RFC 5869’, and is split into two logical modules,
called "extract" and "expand".  The extract module takes an initial
secret and a random salt to extract a fixed-length pseudorandom key
(PRK).  The second stage takes as input the previous PRK and some
informational data (e.g., text) and expands them into multiple keys.

   Nettle's HKDF functions are defined in ‘<nettle/hkdf.h>’.  There are
two abstract functions for the extract and expand operations that
operate on any HMAC implemented via the ‘nettle_hash_update_func’, and
‘nettle_hash_digest_func’ interfaces.

 -- Function: void hkdf_extract (void *mac_ctx, nettle_hash_update_func
          *update, nettle_hash_digest_func *digest, size_t
          digest_size,size_t secret_size, const uint8_t *secret, uint8_t
          *dst)
     Extract a Pseudorandom Key (PRK) from a secret and a salt according
     to HKDF. The HMAC must have been initialized, with its key being
     the salt for the Extract operation.  This function will call the
     UPDATE and DIGEST functions passing the MAC_CTX context parameter
     as an argument in order to compute digest of size DIGEST_SIZE.
     Inputs are the secret SECRET of length SECRET_LENGTH.  The output
     length is fixed to DIGEST_SIZE octets, thus the output buffer DST
     must have room for at least DIGEST_SIZE octets.

 -- Function: void hkdf_expand (void *mac_ctx, nettle_hash_update_func
          *update, nettle_hash_digest_func *digest, size_t digest_size,
          size_t info_size, const uint8_t *info, size_t length, uint8_t
          *dst)
     Expand a Pseudorandom Key (PRK) to an arbitrary size according to
     HKDF. The HMAC must have been initialized, with its key being the
     PRK from the Extract operation.  This function will call the UPDATE
     and DIGEST functions passing the MAC_CTX context parameter as an
     argument in order to compute digest of size DIGEST_SIZE.  Inputs
     are the info INFO of length INFO_LENGTH, and the desired derived
     output length LENGTH.  The output buffer is DST which must have
     room for at least LENGTH octets.

4.6.2 PBKDF2
------------

The most well known PBKDF is the ‘PKCS #5 PBKDF2’ described in ‘RFC
2898’ which uses a pseudo-random function such as HMAC-SHA1.

   Nettle's PBKDF2 functions are defined in ‘<nettle/pbkdf2.h>’.  There
is an abstract function that operate on any PRF implemented via the
‘nettle_hash_update_func’, ‘nettle_hash_digest_func’ interfaces.  There
is also helper macros and concrete functions PBKDF2-HMAC-SHA1,
PBKDF2-HMAC-SHA256, PBKDF2-HMAC-SHA384 and PBKDF2-HMAC-SHA512.  First,
the abstract function:

 -- Function: void pbkdf2 (void *mac_ctx, nettle_hash_update_func
          *update, nettle_hash_digest_func *digest, size_t digest_size,
          unsigned iterations, size_t salt_length, const uint8_t *salt,
          size_t length, uint8_t *dst)
     Derive symmetric key from a password according to PKCS #5 PBKDF2.
     The PRF is assumed to have been initialized and this function will
     call the UPDATE and DIGEST functions passing the MAC_CTX context
     parameter as an argument in order to compute digest of size
     DIGEST_SIZE.  Inputs are the salt SALT of length SALT_LENGTH, the
     iteration counter ITERATIONS (> 0), and the desired derived output
     length LENGTH.  The output buffer is DST which must have room for
     at least LENGTH octets.

   Like for CBC and HMAC, there is a macro to help use the function
correctly.

 -- Macro: PBKDF2 (CTX, UPDATE, DIGEST, DIGEST_SIZE, ITERATIONS,
          SALT_LENGTH, SALT, LENGTH, DST)
     CTX is a pointer to a context struct passed to the UPDATE and
     DIGEST functions (of the types ‘nettle_hash_update_func’ and
     ‘nettle_hash_digest_func’ respectively) to implement the underlying
     PRF with digest size of DIGEST_SIZE.  Inputs are the salt SALT of
     length SALT_LENGTH, the iteration counter ITERATIONS (> 0), and the
     desired derived output length LENGTH.  The output buffer is DST
     which must have room for at least LENGTH octets.

4.6.3 Concrete PBKDF2 functions
-------------------------------

Now we come to the specialized PBKDF2 functions, which are easier to use
than the general PBKDF2 function.

4.6.3.1 PBKDF2-HMAC-SHA1
........................

 -- Function: void pbkdf2_hmac_sha1 (size_t KEY_LENGTH, const uint8_t
          *KEY, unsigned ITERATIONS, size_t SALT_LENGTH, const uint8_t
          *SALT, size_t LENGTH, uint8_t *DST)
     PBKDF2 with HMAC-SHA1.  Derive LENGTH bytes of key into buffer DST
     using the password KEY of length KEY_LENGTH and salt SALT of length
     SALT_LENGTH, with iteration counter ITERATIONS (> 0).  The output
     buffer is DST which must have room for at least LENGTH octets.

4.6.3.2 PBKDF2-HMAC-SHA256
..........................

 -- Function: void pbkdf2_hmac_sha256 (size_t KEY_LENGTH, const uint8_t
          *KEY, unsigned ITERATIONS, size_t SALT_LENGTH, const uint8_t
          *SALT, size_t LENGTH, uint8_t *DST)
     PBKDF2 with HMAC-SHA256.  Derive LENGTH bytes of key into buffer
     DST using the password KEY of length KEY_LENGTH and salt SALT of
     length SALT_LENGTH, with iteration counter ITERATIONS (> 0).  The
     output buffer is DST which must have room for at least LENGTH
     octets.

4.6.3.3 PBKDF2-HMAC-SHA384
..........................

 -- Function: void pbkdf2_hmac_sha384 (size_t KEY_LENGTH, const uint8_t
          *KEY, unsigned ITERATIONS, size_t SALT_LENGTH, const uint8_t
          *SALT, size_t LENGTH, uint8_t *DST)
     PBKDF2 with HMAC-SHA384.  Derive LENGTH bytes of key into buffer
     DST using the password KEY of length KEY_LENGTH and salt SALT of
     length SALT_LENGTH, with iteration counter ITERATIONS (> 0).  The
     output buffer is DST which must have room for at least LENGTH
     octets.

4.6.3.4 PBKDF2-HMAC-SHA512
..........................

 -- Function: void pbkdf2_hmac_sha512 (size_t KEY_LENGTH, const uint8_t
          *KEY, unsigned ITERATIONS, size_t SALT_LENGTH, const uint8_t
          *SALT, size_t LENGTH, uint8_t *DST)
     PBKDF2 with HMAC-SHA512.  Derive LENGTH bytes of key into buffer
     DST using the password KEY of length KEY_LENGTH and salt SALT of
     length SALT_LENGTH, with iteration counter ITERATIONS (> 0).  The
     output buffer is DST which must have room for at least LENGTH
     octets.

4.6.4 BALLOON
-------------

Balloon is a memory-hard password-hashing algorithm.  An in-depth
description of the algorithm and its properties can be found in an
online research paper: Boneh, D., Corrigan-Gibbs, H., Schechter, S.
(2017, May 12).  Balloon Hashing: A Memory-Hard Function Providing
Provable Protection Against Sequential Attacks.  Retrieved Sep 1, 2022,
from <https://eprint.iacr.org/2016/027.pdf>

   Nettle's definition of the BALLOON algorithm can be found in
‘<nettle/balloon.h>’.  There is a general BALLOON function where the
user can specify desired hash algorithm that will be used by the
function.  There are also concrete, more user-friendly functions that
use common hash algorithms like SHA1, SHA256, SHA384 and SHA512.  There
is also a utility function which helps to determine the size of the
working buffer that must be provided as one of the inputs.

   Each BALLOON function takes as an input a password and a salt of
arbitrary lengths, a time and a space parameters, and a scratch buffer.
The space parameter S_COST determines how many blocks of working space
the algorithm will require during its computation.  It is common to set
S_COST to a high value in order to increase the cost of hardware
accelerators built by the adversary.  The time parameter T_COST
determines the number of rounds of computation that the algorithm will
perform.  This can be used to further increase the cost of computation
without raising the memory requirement.  Scratch buffer SCRATCH is a
user allocated working space required by the algorithm.  To determine
the required size of the scratch buffer use the utility function
‘balloon_itch’.  Output of BALLOON algorithm will be written into the
output buffer DST that has to be at least DIGEST_SIZE bytes long.  Note
that it is safe to use the same buffer for both SCRATCH and DST.  Next
follows the description of the general BALLOON function.

 -- Function: void balloon (void *HASH_CTX, nettle_hash_update_func
          *UPDATE, nettle_hash_digest_func *DIGEST, size_t DIGEST_SIZE,
          size_t S_COST, size_t T_COST, size_t PASSWD_LENGTH, const
          uint8_t *PASSWD, size_t SALT_LENGTH, const uint8_t *SALT,
          uint8_t *SCRATCH, uint8_t *DST)
     Compute hash of given password PASSWD of length PASSWD_LENGTH
     salted with SALT of length SALT_LENGTH and write DIGEST_SIZE bytes
     into the output buffer DST.  Parameter HASH_CTX is a context for
     the underlying hash function, which much be initialized by the
     caller.  UPDATE and DIGEST are the update and digest functions of
     the chosen hash algorithm.  DIGEST_SIZE is the digest size of the
     chosen hash algorithm and determines the size of the output.

 -- Function: size_t balloon_itch (size_t DIGEST_SIZE, size_t S_COST)
     Compute the size of the scratch buffer SCRATCH.  DIGEST_SIZE is the
     digest size of the chosen hash algorithm.  S_COST is the space
     parameter used by the ‘balloon’ function.

4.6.5 Concrete BALLOON functions
--------------------------------

Here follows a list of the specialized BALLOON functions, which are more
user-friendly variants of the general function.

4.6.5.1 BALLOON-SHA1
....................

 -- Function: void balloon_sha1 (size_t S_COST, size_t T_COST, size_t
          PASSWD_LENGTH, const uint8_t *PASSWD, size_t SALT_LENGTH,
          const uint8_t *SALT, uint8_t *SCRATCH, uint8_t *DST)
     BALLOON algorithm using SHA1 as the underlying hash function.

4.6.5.2 BALLOON-SHA256
......................

 -- Function: void balloon_sha256 (size_t S_COST, size_t T_COST, size_t
          PASSWD_LENGTH, const uint8_t *PASSWD, size_t SALT_LENGTH,
          const uint8_t *SALT, uint8_t *SCRATCH, uint8_t *DST)
     BALLOON algorithm using SHA256 as the underlying hash function.

4.6.5.3 BALLOON-SHA384
......................

 -- Function: void balloon_sha384 (size_t S_COST, size_t T_COST, size_t
          PASSWD_LENGTH, const uint8_t *PASSWD, size_t SALT_LENGTH,
          const uint8_t *SALT, uint8_t *SCRATCH, uint8_t *DST)
     BALLOON algorithm using SHA384 as the underlying hash function.

4.6.5.4 BALLOON-SHA512
......................

 -- Function: void balloon_sha512 (size_t S_COST, size_t T_COST, size_t
          PASSWD_LENGTH, const uint8_t *PASSWD, size_t SALT_LENGTH,
          const uint8_t *SALT, uint8_t *SCRATCH, uint8_t *DST)
     BALLOON algorithm using SHA512 as the underlying hash function.


File: nettle.info,  Node: Public-key algorithms,  Next: Randomness,  Prev: Key derivation functions,  Up: Reference

4.7 Public-key algorithms
=========================

Nettle uses GMP, the GNU bignum library, for all calculations with large
numbers.  In order to use the public-key features of Nettle (with the
exception of SLH-DSA), you must install GMP, at least version 6.1.0,
before compiling Nettle, and you need to link your programs with
‘-lhogweed -lnettle -lgmp’.

   The concept of “Public-key” cryptography and digital signatures was
discovered by Whitfield Diffie and Martin E. Hellman and described in a
paper 1976.  In traditional, "symmetric", cryptography, sender and
receiver share the same key, and this key must be distributed in a
secure way.  And if there are many users or entities that need to
communicate, each _pair_ needs a shared secret key known by nobody else.
In public key cryptography, each user needs a "key pair", consisting of
a private key which is kept secret, and corresponding public key that is
distributed to all other users.

   Public and private keys can be uses in several different ways: For
key agreement (e.g., Diffie-Hellman or Curve25519 key exchange), digital
signatures (e.g., RSA signatures and Ed25519 signatures), and public key
encryption (e.g., RSA encryption).

   To use a digital signature algorithm, one must first create a
“key-pair”: A public key and a corresponding private key.  The private
key is used to sign messages, while the public key is used for verifying
that that signatures and messages match.  Some care must be taken when
distributing the public key; it need not be kept secret, but if a bad
guy is able to replace it (in transit, or in some user's list of known
public keys), bad things may happen.

   There are two operations one can do with the keys.  The signature
operation takes a message and a private key, and creates a signature for
the message.  A signature is some string of bits, usually at most a few
thousand bits or a few hundred octets.  Unlike paper-and-ink signatures,
the digital signature depends on the message, so one can't cut it out of
context and glue it to a different message.

   The verification operation takes a public key, a message, and a
string that is claimed to be a signature on the message, and returns
true or false.  If it returns true, that means that the three input
values matched, and the verifier can be sure that someone went through
with the signature operation on that very message, and that the
"someone" also knows the private key corresponding to the public key.

   The desired properties of a digital signature algorithm are as
follows: Given the public key and pairs of messages and valid signatures
on them, it should be hard to compute the private key, and it should
also be hard to create a new message and signature that is accepted by
the verification operation.

   Besides signing meaningful messages, digital signatures can be used
for authorization.  A server can be configured with a public key, such
that any client that connects to the service is given a random nonce
message.  If the server gets a reply with a correct signature matching
the nonce message and the configured public key, the client is granted
access.  So the configuration of the server can be understood as "grant
access to whoever knows the private key corresponding to this particular
public key, and to no others".

* Menu:

* RSA::                         The RSA public key algorithm.
* DSA::                         The DSA digital signature algorithm.
* Elliptic curves::             Elliptic curves and ECDSA.
* SLH-DSA::                     Stateless hash-based digital signatures.


File: nettle.info,  Node: RSA,  Next: DSA,  Up: Public-key algorithms

4.7.1 RSA
---------

The RSA algorithm was the first practical digital signature algorithm
that was constructed.  It was described 1978 in a paper by Ronald
Rivest, Adi Shamir and L.M. Adleman, and the technique was also patented
in the USA in 1983.  The patent expired on September 20, 2000, and since
that day, RSA can be used freely, even in the USA.

   It's remarkably simple to describe the trapdoor function behind RSA.
The "one-way"-function used is

     F(x) = x^e mod n

   I.e.  raise x to the ‘e’'th power, while discarding all multiples of
‘n’.  The pair of numbers ‘n’ and ‘e’ is the public key.  ‘e’ can be
quite small, even ‘e = 3’ has been used, although slightly larger
numbers are recommended.  ‘n’ should be about 2000 bits or larger.

   If ‘n’ is large enough, and properly chosen, the inverse of F, the
computation of ‘e’'th roots modulo ‘n’, is very difficult.  But, where's
the trapdoor?

   Let's first look at how RSA key-pairs are generated.  First ‘n’ is
chosen as the product of two large prime numbers ‘p’ and ‘q’ of roughly
the same size (so if ‘n’ is 2000 bits, ‘p’ and ‘q’ are about 1000 bits
each).  One also computes the number ‘phi = (p-1)(q-1)’, in mathematical
speak, ‘phi’ is the order of the multiplicative group of integers modulo
n.

   Next, ‘e’ is chosen.  It must have no factors in common with ‘phi’
(in particular, it must be odd), but can otherwise be chosen more or
less randomly.  ‘e = 65537’ is a popular choice, because it makes
raising to the ‘e’'th power particularly efficient, and being prime, it
usually has no factors common with ‘phi’.

   Finally, a number ‘d’, ‘d < n’ is computed such that ‘e d mod phi =
1’.  It can be shown that such a number exists (this is why ‘e’ and
‘phi’ must have no common factors), and that for all ‘x’,

     (x^e)^d mod n = x^(ed) mod n = (x^d)^e mod n = x

   Using Euclid's algorithm, ‘d’ can be computed quite easily from ‘phi’
and ‘e’.  But it is still hard to get ‘d’ without knowing ‘phi’, which
depends on the factorization of ‘n’.

   So ‘d’ is the trapdoor, if we know ‘d’ and ‘y = F(x)’, we can recover
‘x’ as ‘y^d mod n’.  ‘d’ is also the private half of the RSA key-pair.

   The most common signature operation for RSA is defined in ‘PKCS#1’, a
specification by RSA Laboratories.  The message to be signed is first
hashed using a cryptographic hash function, e.g.  SHA256.  Next, some
padding, the ASN.1 "Algorithm Identifier" for the hash function, and the
message digest itself, are concatenated and converted to a number ‘x’.
The signature is computed from ‘x’ and the private key as ‘s = x^d mod
n’(1) (*note RSA-Footnote-1::).  The signature, ‘s’, is a number of
about the same size of ‘n’, and it usually encoded as a sequence of
octets, most significant octet first.

   The verification operation is straight-forward, ‘x’ is computed from
the message in the same way as above.  Then ‘s^e mod n’ is computed, the
operation returns true if and only if the result equals ‘x’.

   The RSA algorithm can also be used for encryption.  RSA encryption
uses the public key ‘(n,e)’ to compute the ciphertext ‘m^e mod n’.  The
‘PKCS#1’ padding scheme will use at least 8 random and non-zero octets,
using M of the form ‘[00 02 padding 00 plaintext]’.  It is required that
‘m < n’, and therefor the plaintext must be smaller than the octet size
of the modulo ‘n’, with some margin.

   To decrypt the message, one needs the private key to compute ‘m = c^e
mod n’ followed by checking and removing the padding.

4.7.1.1 Nettle's RSA support
............................

Nettle represents RSA keys using two structures that contain large
numbers (of type ‘mpz_t’).

 -- Context struct: rsa_public_key size n e
     ‘size’ is the size, in octets, of the modulo, and is used
     internally.  ‘n’ and ‘e’ is the public key.

 -- Context struct: rsa_private_key size d p q a b c
     ‘size’ is the size, in octets, of the modulo, and is used
     internally.  ‘d’ is the secret exponent, but it is not actually
     used when signing.  Instead, the factors ‘p’ and ‘q’, and the
     parameters ‘a’, ‘b’ and ‘c’ are used.  They are computed from ‘p’,
     ‘q’ and ‘e’ such that ‘a e mod (p - 1) = 1, b e mod (q - 1) = 1, c
     q mod p = 1’.

   Before use, these structs must be initialized by calling one of

 -- Function: void rsa_public_key_init (struct rsa_public_key *PUB)
 -- Function: void rsa_private_key_init (struct rsa_private_key *KEY)
     Calls ‘mpz_init’ on all numbers in the key struct.

   and when finished with them, the space for the numbers must be
deallocated by calling one of

 -- Function: void rsa_public_key_clear (struct rsa_public_key *PUB)
 -- Function: void rsa_private_key_clear (struct rsa_private_key *KEY)
     Calls ‘mpz_clear’ on all numbers in the key struct.

   In general, Nettle's RSA functions deviates from Nettle's "no memory
allocation"-policy.  Space for all the numbers, both in the key structs
above, and temporaries, are allocated dynamically.  For information on
how to customize allocation, see *Note GMP Allocation: (gmp)Custom
Allocation.

   When you have assigned values to the attributes of a key, you must
call

 -- Function: int rsa_public_key_prepare (struct rsa_public_key *PUB)
 -- Function: int rsa_private_key_prepare (struct rsa_private_key *KEY)
     Computes the octet size of the key (stored in the ‘size’ attribute,
     and may also do other basic sanity checks.  Returns one if
     successful, or zero if the key can't be used, for instance if the
     modulo is smaller than the minimum size needed for RSA operations
     specified by PKCS#1.

   For each operation using the private key, there are two variants,
e.g., ‘rsa_sha256_sign’ and ‘rsa_sha256_sign_tr’.  The former function
is older, and it should be avoided, because it provides no defenses
against side-channel attacks.  The latter function use randomized RSA
blinding, which defends against timing attacks using chosen-ciphertext,
and it also checks the correctness of the private key computation using
the public key, which defends against software or hardware errors which
could leak the private key.

   Before signing or verifying a message, you first hash it with the
appropriate hash function.  You pass the hash function's context struct
to the RSA signature function, and it will extract the message digest
and do the rest of the work.  There are also alternative functions that
take the hash digest as argument.

   There is currently no support for using SHA224 or SHA384 with RSA
signatures, since there's no gain in either computation time nor message
size compared to using SHA256 and SHA512, respectively.

   Creating an RSA signature is done with one of the following
functions:

 -- Function: int rsa_md5_sign_tr (const struct rsa_public_key *PUB,
          const struct rsa_private_key *KEY, void *RANDOM_CTX,
          nettle_random_func *RANDOM, struct md5_ctx *HASH, mpz_t
          SIGNATURE)
 -- Function: int rsa_sha1_sign_tr (const struct rsa_public_key *PUB,
          const struct rsa_private_key *KEY, void *RANDOM_CTX,
          nettle_random_func *RANDOM, struct sha1_ctx *HASH, mpz_t
          SIGNATURE)
 -- Function: int rsa_sha256_sign_tr (const struct rsa_public_key *PUB,
          const struct rsa_private_key *KEY, void *RANDOM_CTX,
          nettle_random_func *RANDOM, struct sha256_ctx *HASH, mpz_t
          SIGNATURE)
 -- Function: int rsa_sha512_sign_tr (const struct rsa_public_key *PUB,
          const struct rsa_private_key *KEY, void *RANDOM_CTX,
          nettle_random_func *RANDOM, struct sha512_ctx *HASH, mpz_t
          SIGNATURE)
     The signature is stored in SIGNATURE (which must have been
     ‘mpz_init’'ed earlier).  The hash context is reset so that it can
     be used for new messages.  The RANDOM_CTX and RANDOM pointers are
     used to generate the RSA blinding.  Returns one on success, or zero
     on failure.  Signing fails if an error in the computation was
     detected, or if the key is too small for the given hash size, e.g.,
     it's not possible to create a signature using SHA512 and a 512-bit
     RSA key.

 -- Function: int rsa_md5_sign_digest_tr (const struct rsa_public_key
          *PUB, const struct rsa_private_key *KEY, void *RANDOM_CTX,
          nettle_random_func *RANDOM, const uint8_t *DIGEST, mpz_t
          SIGNATURE)
 -- Function: int rsa_sha1_sign_digest_tr (const struct rsa_public_key
          *PUB, const struct rsa_private_key *KEY, void *RANDOM_CTX,
          nettle_random_func *RANDOM, const uint8_t *DIGEST, mpz_t
          SIGNATURE)
 -- Function: int rsa_sha256_sign_digest_tr (const struct rsa_public_key
          *PUB, const struct rsa_private_key *KEY, void *RANDOM_CTX,
          nettle_random_func *RANDOM, const uint8_t *DIGEST, mpz_t
          SIGNATURE)
 -- Function: int rsa_sha512_sign_digest_tr (const struct rsa_public_key
          *PUB, const struct rsa_private_key *KEY, void *RANDOM_CTX,
          nettle_random_func *RANDOM, const uint8_t *DIGEST, mpz_t
          SIGNATURE)
     Creates a signature from the given hash digest.  DIGEST should
     point to a digest of size ‘MD5_DIGEST_SIZE’, ‘SHA1_DIGEST_SIZE’,
     ‘SHA256_DIGEST_SIZE’, or ‘SHA512_DIGEST_SIZE’respectively.  The
     signature is stored in SIGNATURE (which must have been
     ‘mpz_init’:ed earlier).  Returns one on success, or zero on
     failure.

 -- Function: int rsa_pkcs1_sign_tr (const struct rsa_public_key *PUB,
          const struct rsa_private_key *KEY, void *RANDOM_CTX,
          nettle_random_func *RANDOM, size_t LENGTH, const uint8_t
          *DIGEST_INFO, mpz_t SIGNATURE)
     Similar to the above ‘_sign_digest_tr’ functions, but the input is
     not the plain hash digest, but a PKCS#1 "DigestInfo", an ASN.1
     DER-encoding of the digest together with an object identifier for
     the used hash algorithm.

 -- Function: int rsa_md5_sign (const struct rsa_private_key *KEY,
          struct md5_ctx *HASH, mpz_t SIGNATURE)
 -- Function: int rsa_sha1_sign (const struct rsa_private_key *KEY,
          struct sha1_ctx *HASH, mpz_t SIGNATURE)
 -- Function: int rsa_sha256_sign (const struct rsa_private_key *KEY,
          struct sha256_ctx *HASH, mpz_t SIGNATURE)
 -- Function: int rsa_sha512_sign (const struct rsa_private_key *KEY,
          struct sha512_ctx *HASH, mpz_t SIGNATURE)
     The signature is stored in SIGNATURE (which must have been
     ‘mpz_init’'ed earlier).  The hash context is reset so that it can
     be used for new messages.  Returns one on success, or zero on
     failure.  Signing fails if the key is too small for the given hash
     size, e.g., it's not possible to create a signature using SHA512
     and a 512-bit RSA key.

 -- Function: int rsa_md5_sign_digest (const struct rsa_private_key
          *KEY, const uint8_t *DIGEST, mpz_t SIGNATURE)
 -- Function: int rsa_sha1_sign_digest (const struct rsa_private_key
          *KEY, const uint8_t *DIGEST, mpz_t SIGNATURE)
 -- Function: int rsa_sha256_sign_digest (const struct rsa_private_key
          *KEY, const uint8_t *DIGEST, mpz_t SIGNATURE)
 -- Function: int rsa_sha512_sign_digest (const struct rsa_private_key
          *KEY, const uint8_t *DIGEST, mpz_t SIGNATURE)
     Creates a signature from the given hash digest; otherwise
     analoguous to the above signing functions.  DIGEST should point to
     a digest of size ‘MD5_DIGEST_SIZE’, ‘SHA1_DIGEST_SIZE’,
     ‘SHA256_DIGEST_SIZE’, or ‘SHA512_DIGEST_SIZE’, respectively.  The
     signature is stored in SIGNATURE (which must have been
     ‘mpz_init’:ed earlier).  Returns one on success, or zero on
     failure.

 -- Function: int rsa_pkcs1_sign (const struct rsa_private_key *KEY,
          size_t LENGTH, const uint8_t *DIGEST_INFO, mpz_t S)
     Similar to the above _sign_digest functions, but the input is not
     the plain hash digest, but a PKCS#1 "DigestInfo", an ASN.1
     DER-encoding of the digest together with an object identifier for
     the used hash algorithm.

   Verifying an RSA signature is done with one of the following
functions:

 -- Function: int rsa_md5_verify (const struct rsa_public_key *KEY,
          struct md5_ctx *HASH, const mpz_t SIGNATURE)
 -- Function: int rsa_sha1_verify (const struct rsa_public_key *KEY,
          struct sha1_ctx *HASH, const mpz_t SIGNATURE)
 -- Function: int rsa_sha256_verify (const struct rsa_public_key *KEY,
          struct sha256_ctx *HASH, const mpz_t SIGNATURE)
 -- Function: int rsa_sha512_verify (const struct rsa_public_key *KEY,
          struct sha512_ctx *HASH, const mpz_t SIGNATURE)
     Returns 1 if the signature is valid, or 0 if it isn't.  In either
     case, the hash context is reset so that it can be used for new
     messages.

 -- Function: int rsa_md5_verify_digest (const struct rsa_public_key
          *KEY, const uint8_t *DIGEST, const mpz_t SIGNATURE)
 -- Function: int rsa_sha1_verify_digest (const struct rsa_public_key
          *KEY, const uint8_t *DIGEST, const mpz_t SIGNATURE)
 -- Function: int rsa_sha256_verify_digest (const struct rsa_public_key
          *KEY, const uint8_t *DIGEST, const mpz_t SIGNATURE)
 -- Function: int rsa_sha512_verify_digest (const struct rsa_public_key
          *KEY, const uint8_t *DIGEST, const mpz_t SIGNATURE)
     Returns 1 if the signature is valid, or 0 if it isn't.  DIGEST
     should point to a digest of size ‘MD5_DIGEST_SIZE’,
     ‘SHA1_DIGEST_SIZE’, ‘SHA256_DIGEST_SIZE’, or ‘SHA512_DIGEST_SIZE’
     respectively.

 -- Function: int rsa_pkcs1_verify (const struct rsa_public_key *KEY,
          size_t LENGTH, const uint8_t *DIGEST_INFO, const mpz_t
          SIGNATURE)
     Similar to the above _verify_digest functions, but the input is not
     the plain hash digest, but a PKCS#1 "DigestInfo", and ASN.1
     DER-encoding of the digest together with an object identifier for
     the used hash algorithm.

   While the above functions for the RSA signature operations use the
‘PKCS#1’ padding scheme, Nettle also provides the variants based on the
PSS padding scheme, specified in ‘RFC 8017’.  These variants take
advantage of a randomly choosen salt value, which could enhance the
security by causing output to be different for equivalent inputs.
However, assuming the same security level as inverting the RSA
algorithm, a longer salt value does not always mean a better security
<https://www.iacr.org/archive/eurocrypt2002/23320268/coron.pdf>.  The
typical choices of the length are between 0 and the digest size of the
underlying hash function.

   Creating an RSA signature with the PSS padding scheme is done with
one of the following functions:

 -- Function: int rsa_pss_sha256_sign_digest_tr (const struct
          rsa_public_key *PUB, const struct rsa_private_key *KEY, void
          *RANDOM_CTX, nettle_random_func *RANDOM, size_t SALT_LENGTH,
          const uint8_t *SALT, const uint8_t *DIGEST, mpz_t SIGNATURE)
 -- Function: int rsa_pss_sha384_sign_digest_tr (const struct
          rsa_public_key *PUB, const struct rsa_private_key *KEY, void
          *RANDOM_CTX, nettle_random_func *RANDOM, size_t SALT_LENGTH,
          const uint8_t *SALT, const uint8_t *DIGEST, mpz_t SIGNATURE)
 -- Function: int rsa_pss_sha512_sign_digest_tr (const struct
          rsa_public_key *PUB, const struct rsa_private_key *KEY, void
          *RANDOM_CTX, nettle_random_func *RANDOM, size_t SALT_LENGTH,
          const uint8_t *SALT, const uint8_t *DIGEST, mpz_t SIGNATURE)
     Creates a signature using the PSS padding scheme.  SALT should
     point to a salt string of size SALT_LENGTH.  DIGEST should point to
     a digest of size ‘SHA256_DIGEST_SIZE’, ‘SHA384_DIGEST_SIZE’, or
     ‘SHA512_DIGEST_SIZE’respectively.  The signature is stored in
     SIGNATURE (which must have been ‘mpz_init’:ed earlier).  Returns
     one on success, or zero on failure.

   Verifying an RSA signature with the PSS padding scheme is done with
one of the following functions:

 -- Function: int rsa_pss_sha256_verify_digest (const struct
          rsa_public_key *KEY, size_t SALT_LENGTH, const uint8_t
          *DIGEST, const mpz_t SIGNATURE)
 -- Function: int rsa_pss_sha384_verify_digest (const struct
          rsa_public_key *KEY, size_t SALT_LENGTH, const uint8_t
          *DIGEST, const mpz_t SIGNATURE)
 -- Function: int rsa_pss_sha512_verify_digest (const struct
          rsa_public_key *KEY, size_t SALT_LENGTH, const uint8_t
          *DIGEST, const mpz_t SIGNATURE)
     Returns 1 if the signature is valid, or 0 if it isn't.  DIGEST
     should point to a digest of size ‘SHA256_DIGEST_SIZE’,
     ‘SHA384_DIGEST_SIZE’, or ‘SHA512_DIGEST_SIZE’ respectively.

   The following function is used to encrypt a clear text message using
RSA.
 -- Function: int rsa_encrypt (const struct rsa_public_key *KEY, void
          *RANDOM_CTX, nettle_random_func *RANDOM, size_t LENGTH, const
          uint8_t *CLEARTEXT, mpz_t CIPHERTEXT)
     Returns 1 on success, 0 on failure.  If the message is too long
     then this will lead to a failure.
   The following function is used to decrypt a cipher text message using
RSA.
 -- Function: int rsa_decrypt (const struct rsa_private_key *KEY, size_t
          *LENGTH, uint8_t *CLEARTEXT, const mpz_t CIPHERTEXT)
     Returns 1 on success, 0 on failure.  Causes of failure include
     decryption failing or the resulting message being to large.  The
     message buffer pointed to by CLEARTEXT must be of size *LENGTH.
     After decryption, *LENGTH will be updated with the size of the
     message.
   There is also a timing resistant version of decryption that utilizes
randomized RSA blinding.
 -- Function: int rsa_decrypt_tr (const struct rsa_public_key *PUB,
          const struct rsa_private_key *KEY, void *RANDOM_CTX,
          nettle_random_func *RANDOM, size_t *LENGTH, uint8_t *MESSAGE,
          const mpz_t CIPHERTEXT)
     Returns 1 on success, 0 on failure.

   While the above functions for the RSA encryption operations use the
‘PKCS#1’ padding scheme, Nettle also provides the variants based on the
OAEP padding scheme, specified in ‘RFC 8017’.  These variants take
advantage of a randomly choosen seed value, which could enhance the
security by causing output to be different for equivalent inputs.

   Encrypting a clear text message using RSA with the OAEP padding
scheme is done with one of the following functions:

 -- Function: int rsa_oaep_sha256_encrypt (const struct rsa_public_key
          *KEY, void *RANDOM_CTX, nettle_random_func *RANDOM, size_t
          LABEL_LENGTH, const uint8_t *LABEL, size_t LENGTH, const
          uint8_t *MESSAGE, uint8_t *CIPHERTEXT)
 -- Function: int rsa_oaep_sha384_encrypt (const struct rsa_public_key
          *KEY, void *RANDOM_CTX, nettle_random_func *RANDOM, size_t
          LABEL_LENGTH, const uint8_t *LABEL, size_t LENGTH, const
          uint8_t *MESSAGE, uint8_t *CIPHERTEXT)
 -- Function: int rsa_oaep_sha512_encrypt (const struct rsa_public_key
          *KEY, void *RANDOM_CTX, nettle_random_func *RANDOM, size_t
          LABEL_LENGTH, const uint8_t *LABEL, size_t LENGTH, const
          uint8_t *MESSAGE, uint8_t *CIPHERTEXT)
     Returns 1 on success, 0 on failure.  The label is optional and if
     omitted, LABEL_LENGTH and LABEL is set to 0 and ‘NULL’
     respectively.  The maximum size of MESSAGE can be calculated with
     ‘k - 2 * hLen - 2’, where ‘k’ is the key size in octets obtained
     with KEY->size, and ‘hLen’ is the output size of the underlying
     hash function (e.g., ‘SHA256_DIGEST_SIZE’ for
     ‘rsa_oaep_sha256_encrypt’).

   Decrypting a cipher text message using RSA with the OAEP padding
scheme is done with one of the following functions:

 -- Function: int rsa_oaep_sha256_decrypt (const struct rsa_public_key
          *PUB, const struct rsa_private_key *KEY, void *RANDOM_CTX,
          nettle_random_func *RANDOM, size_t LABEL_LENGTH, const uint8_t
          *LABEL, size_t *LENGTH, uint8_t *MESSAGE, const uint8_t
          *CIPHERTEXT)
 -- Function: int rsa_oaep_sha384_decrypt (const struct rsa_public_key
          *PUB, const struct rsa_private_key *KEY, void *RANDOM_CTX,
          nettle_random_func *RANDOM, size_t LABEL_LENGTH, const uint8_t
          *LABEL, size_t *LENGTH, uint8_t *MESSAGE, const uint8_t
          *CIPHERTEXT)
 -- Function: int rsa_oaep_sha512_decrypt (const struct rsa_public_key
          *PUB, const struct rsa_private_key *KEY, void *RANDOM_CTX,
          nettle_random_func *RANDOM, size_t LABEL_LENGTH, const uint8_t
          *LABEL, size_t *LENGTH, uint8_t *MESSAGE, const uint8_t
          *CIPHERTEXT)
     Returns 1 on success, 0 on failure.  These function utilize
     randomized RSA blinding similarly to ‘rsa_decrypt_tr’.  The message
     buffer pointed to by CLEARTEXT must be of size *LENGTH.  After
     decryption, *LENGTH will be updated with the size of the message.

   If you need to use the RSA trapdoor, the private key, in a way that
isn't supported by the above functions Nettle also includes a function
that computes ‘x^d mod n’ and nothing more, using the CRT optimization.

 -- Function: int rsa_compute_root_tr (const struct rsa_public_key *PUB,
          const struct rsa_private_key *KEY, void *RANDOM_CTX,
          nettle_random_func *RANDOM, mpz_t X, const mpz_t M)
     Computes ‘x = m^d’.  Returns one on success, or zero if a failure
     in the computation was detected.

 -- Function: void rsa_compute_root (struct rsa_private_key *KEY, mpz_t
          X, const mpz_t M)
     Computes ‘x = m^d’.

   At last, how do you create new keys?

 -- Function: int rsa_generate_keypair (struct rsa_public_key *PUB,
          struct rsa_private_key *KEY, void *RANDOM_CTX,
          nettle_random_func RANDOM, void *PROGRESS_CTX,
          nettle_progress_func PROGRESS, unsigned N_SIZE, unsigned
          E_SIZE)
     There are lots of parameters.  PUB and KEY is where the resulting
     key pair is stored.  The structs should be initialized, but you
     don't need to call ‘rsa_public_key_prepare’ or
     ‘rsa_private_key_prepare’ after key generation.

     RANDOM_CTX and RANDOM is a randomness generator.
     ‘random(random_ctx, length, dst)’ should generate ‘length’ random
     octets and store them at ‘dst’.  For advice, see *Note
     Randomness::.

     PROGRESS and PROGRESS_CTX can be used to get callbacks during the
     key generation process, in order to uphold an illusion of progress.
     PROGRESS can be NULL, in that case there are no callbacks.

     SIZE_N is the desired size of the modulo, in bits.  If SIZE_E is
     non-zero, it is the desired size of the public exponent and a
     random exponent of that size is selected.  But if E_SIZE is zero,
     it is assumed that the caller has already chosen a value for ‘e’,
     and stored it in PUB.  Returns one on success, and zero on failure.
     The function can fail for example if if N_SIZE is too small, or if
     E_SIZE is zero and ‘pub->e’ is an even number.


File: nettle.info,  Node: RSA-Footnotes,  Up: RSA

   (1) Actually, the computation is not done like this, it is done more
efficiently using ‘p’, ‘q’ and the Chinese remainder theorem (CRT).  But
the result is the same.


File: nettle.info,  Node: DSA,  Next: Elliptic curves,  Prev: RSA,  Up: Public-key algorithms

4.7.2 DSA
---------

The DSA digital signature algorithm is more complex than RSA.  It was
specified during the early 1990s, and in 1994 NIST published FIPS 186
which is the authoritative specification.  Sometimes DSA is referred to
using the acronym DSS, for Digital Signature Standard.  The most recent
revision of the specification, FIPS186-3, was issued in 2009, and it
adds support for larger hash functions than sha1.

   For DSA, the underlying mathematical problem is the computation of
discrete logarithms.  The public key consists of a large prime ‘p’, a
small prime ‘q’ which is a factor of ‘p-1’, a number ‘g’ which generates
a subgroup of order ‘q’ modulo ‘p’, and an element ‘y’ in that subgroup.

   In the original DSA, the size of ‘q’ is fixed to 160 bits, to match
with the SHA1 hash algorithm.  The size of ‘p’ is in principle
unlimited, but the standard specifies only nine specific sizes: ‘512 +
l*64’, where ‘l’ is between 0 and 8.  Thus, the maximum size of ‘p’ is
1024 bits, and sizes less than 1024 bits are considered obsolete and not
secure.

   The subgroup requirement means that if you compute

     g^t mod p

   for all possible integers ‘t’, you will get precisely ‘q’ distinct
values.

   The private key is a secret exponent ‘x’, such that

     g^x = y mod p

   In mathematical speak, ‘x’ is the “discrete logarithm” of ‘y’ mod
‘p’, with respect to the generator ‘g’.  The size of ‘x’ will also be
about the same size as ‘q’.  The security of the DSA algorithm relies on
the difficulty of the discrete logarithm problem.  Current algorithms to
compute discrete logarithms in this setting, and hence crack DSA, are of
two types.  The first type works directly in the (multiplicative) group
of integers mod ‘p’.  The best known algorithm of this type is the
Number Field Sieve, and it's complexity is similar to the complexity of
factoring numbers of the same size as ‘p’.  The other type works in the
smaller ‘q’-sized subgroup generated by ‘g’, which has a more difficult
group structure.  One good algorithm is Pollard-rho, which has
complexity ‘sqrt(q)’.

   The important point is that security depends on the size of _both_
‘p’ and ‘q’, and they should be chosen so that the difficulty of both
discrete logarithm methods are comparable.  Today, the security margin
of the original DSA may be uncomfortably small.  Using a ‘p’ of 1024
bits implies that cracking using the number field sieve is expected to
take about the same time as factoring a 1024-bit RSA modulo, and using a
‘q’ of size 160 bits implies that cracking using Pollard-rho will take
roughly ‘2^80’ group operations.  With the size of ‘q’ fixed, tied to
the SHA1 digest size, it may be tempting to increase the size of ‘p’ to,
say, 4096 bits.  This will provide excellent resistance against attacks
like the number field sieve which works in the large group.  But it will
do very little to defend against Pollard-rho attacking the small
subgroup; the attacker is slowed down at most by a single factor of 10
due to the more expensive group operation.  And the attacker will surely
choose the latter attack.

   The signature generation algorithm is randomized; in order to create
a DSA signature, you need a good source for random numbers (*note
Randomness::).  Let us describe the common case of a 160-bit ‘q’.

   To create a signature, one starts with the hash digest of the
message, ‘h’, which is a 160 bit number, and a random number ‘k, 0<k<q’,
also 160 bits.  Next, one computes

     r = (g^k mod p) mod q
     s = k^-1 (h + x r) mod q

   The signature is the pair ‘(r, s)’, two 160 bit numbers.  Note the
two different mod operations when computing ‘r’, and the use of the
secret exponent ‘x’.

   To verify a signature, one first checks that ‘0 < r,s < q’, and then
one computes backwards,

     w = s^-1 mod q
     v = (g^(w h) y^(w r) mod p) mod q

   The signature is valid if ‘v = r’.  This works out because ‘w = s^-1
mod q = k (h + x r)^-1 mod q’, so that

     g^(w h) y^(w r) = g^(w h) (g^x)^(w r) = g^(w (h + x r)) = g^k

   When reducing mod ‘q’ this yields ‘r’.  Note that when verifying a
signature, we don't know either ‘k’ or ‘x’: those numbers are secret.

   If you can choose between RSA and DSA, which one is best?  Both are
believed to be secure.  DSA gained popularity in the late 1990s, as a
patent free alternative to RSA.  Now that the RSA patents have expired,
there's no compelling reason to want to use DSA.  Today, the original
DSA key size does not provide a large security margin, and it should
probably be phased out together with RSA keys of 1024 bits.  Using the
revised DSA algorithm with a larger hash function, in particular,
SHA256, a 256-bit ‘q’, and ‘p’ of size 2048 bits or more, should provide
for a more comfortable security margin, but these variants are not yet
in wide use.

   DSA signatures are smaller than RSA signatures, which is important
for some specialized applications.

   From a practical point of view, DSA's need for a good randomness
source is a serious disadvantage.  If you ever use the same ‘k’ (and
‘r’) for two different message, you leak your private key.

4.7.2.1 Nettle's DSA support
............................

Like for RSA, Nettle represents DSA keys using two structures,
containing values of type ‘mpz_t’.  For information on how to customize
allocation, see *Note GMP Allocation: (gmp)Custom Allocation.  Nettle's
DSA interface is defined in ‘<nettle/dsa.h>’.

   A DSA group is represented using the following struct.

 -- Context struct: dsa_params p q g
     Parameters of the DSA group.

 -- Function: void dsa_params_init (struct dsa_params *PARAMS)
     Calls ‘mpz_init’ on all numbers in the struct.

 -- Function: void dsa_params_clear (struct dsa_params *PARAMSparams)
     Calls ‘mpz_clear’ on all numbers in the struct.

 -- Function: int dsa_generate_params (struct dsa_params *PARAMS, void
          *RANDOM_CTX, nettle_random_func *RANDOM, void *PROGRESS_CTX,
          nettle_progress_func *PROGRESS, unsigned P_BITS, unsigned
          Q_BITS)
     Generates parameters of a new group.  The PARAMS struct should be
     initialized before you call this function.

     RANDOM_CTX and RANDOM is a randomness generator.
     ‘random(random_ctx, length, dst)’ should generate ‘length’ random
     octets and store them at ‘dst’.  For advice, see *Note
     Randomness::.

     PROGRESS and PROGRESS_CTX can be used to get callbacks during the
     key generation process, in order to uphold an illusion of progress.
     PROGRESS can be NULL, in that case there are no callbacks.

     P_BITS and Q_BITS are the desired sizes of ‘p’ and ‘q’.  To
     generate keys that conform to the original DSA standard, you must
     use ‘q_bits = 160’ and select P_BITS of the form ‘p_bits = 512 +
     l*64’, for ‘0 <= l <= 8’, where the smaller sizes are no longer
     recommended, so you should most likely stick to ‘p_bits = 1024’.
     Non-standard sizes are possible, in particular ‘p_bits’ larger than
     1024, although DSA implementations can not in general be expected
     to support such keys.  Also note that using very large P_BITS, with
     Q_BITS fixed at 160, doesn't make much sense, because the security
     is also limited by the size of the smaller prime.  To generate DSA
     keys for use with SHA256, use ‘q_bits = 256’ and, e.g., ‘p_bits =
     2048’.

     Returns one on success, and zero on failure.  The function will
     fail if Q_BITS is too small, or too close to P_BITS.

   Signatures are represented using the structure below.

 -- Context struct: dsa_signature r s
     The R and S fields are both of type ‘mpz_t’.

 -- Function: void dsa_signature_init (struct dsa_signature *SIGNATURE)
 -- Function: void dsa_signature_clear (struct dsa_signature *SIGNATURE)
     You must call ‘dsa_signature_init’ before creating or using a
     signature, and call ‘dsa_signature_clear’ when you are finished
     with it.

   Keys are represented as bignums, of type ‘mpz_t’.  A public key
represents a group element, and is of the same size as ‘p’, while a
private key is an exponent, of the same size as ‘q’.

 -- Function: int dsa_sign (const struct dsa_params *PARAMS, const mpz_t
          X, void *RANDOM_CTX, nettle_random_func *RANDOM, size_t
          DIGEST_SIZE, const uint8_t *DIGEST, struct dsa_signature
          *SIGNATURE)
     Creates a signature from the given hash digest, using the private
     key X.  RANDOM_CTX and RANDOM is a randomness generator.
     ‘random(random_ctx, length, dst)’ should generate ‘length’ random
     octets and store them at ‘dst’.  For advice, see *Note
     Randomness::.  Returns one on success, or zero on failure.  Signing
     can fail only if the key is invalid, so that inversion modulo ‘q’
     fails.

 -- Function: int dsa_verify (const struct dsa_params *PARAMS, const
          mpz_t Y, size_t DIGEST_SIZE, const uint8_t *DIGEST, const
          struct dsa_signature *SIGNATURE)
     Verifies a signature, using the public key y.  Returns 1 if the
     signature is valid, otherwise 0.

   To generate a keypair, first generate a DSA group using
‘dsa_generate_params’.  A keypair in this group is then created using

 -- Function: void dsa_generate_keypair (const struct dsa_params
          *PARAMS, mpz_t PUB, mpz_t KEY, void *RANDOM_CTX,
          nettle_random_func *RANDOM)
     Generates a new keypair, using the group PARAMS.  The public key is
     stored in PUB, and the private key in KEY.  Both variables must be
     initialized using ‘mpz_init’ before this call.

     RANDOM_CTX and RANDOM is a randomness generator.
     ‘random(random_ctx, length, dst)’ should generate ‘length’ random
     octets and store them at ‘dst’.  For advice, see *Note
     Randomness::.


File: nettle.info,  Node: Elliptic curves,  Next: SLH-DSA,  Prev: DSA,  Up: Public-key algorithms

4.7.3 Elliptic curves
---------------------

For cryptographic purposes, an elliptic curve is a mathematical group of
points, and computing logarithms in this group is computationally
difficult problem.  Nettle uses additive notation for elliptic curve
groups.  If P and Q are two points, and k is an integer, the point sum,
P + Q, and the multiple k P can be computed efficiently, but given only
two points P and Q, finding an integer k such that Q = k P is the
elliptic curve discrete logarithm problem.

   Nettle supports standard curves which are all of the form y^2 = x^3 -
3 x + b (mod p), i.e., the points have coordinates (x,y), both
considered as integers modulo a specified prime p.  Curves are
represented as a ‘struct ecc_curve’.  It also supports curve25519 and
curve488, which uses a different form of curve.  Supported curves are
declared in ‘<nettle/ecc-curve.h>’, e.g., call ‘nettle_get_secp_256r1’
for a standardized curve using the 256-bit prime p = 2^{256} - 2^{224} +
2^{192} + 2^{96} - 1.  The contents of these structs is not visible to
nettle users.  The "bitsize of the curve" is used as a shorthand for the
bitsize of the curve's prime p, e.g., 256 bits for the SECP 256R1 curve.

* Menu:

* Side-channel silence::
* ECDSA::
* GOSTDSA::
* Curve 25519 and Curve 448::


File: nettle.info,  Node: Side-channel silence,  Next: ECDSA,  Up: Elliptic curves

4.7.3.1 Side-channel silence
............................

Nettle's implementation of the elliptic curve operations is intended to
be side-channel silent.  The side-channel attacks considered are:

   • Timing attacks If the timing of operations depends on secret
     values, an attacker interacting with your system can measure the
     response time, and infer information about your secrets, e.g., a
     private signature key.

   • Attacks using memory caches Assume you have some secret data on a
     multi-user system, and that this data is properly protected so that
     other users get no direct access to it.  If you have a process
     operating on the secret data, and this process does memory accesses
     depending on the data, e.g, an internal lookup table in some
     cryptographic algorithm, an attacker running a separate process on
     the same system may use behavior of internal CPU caches to get
     information about your secrets.  This type of attack can even cross
     virtual machine boundaries.

   Nettle's ECC implementation is designed to be “side-channel silent”,
and not leak any information to these attacks.  Timing and memory
accesses depend only on the size of the input data and its location in
memory, not on the actual data bits.  This implies a performance penalty
in several of the building blocks.


File: nettle.info,  Node: ECDSA,  Next: GOSTDSA,  Prev: Side-channel silence,  Up: Elliptic curves

4.7.3.2 ECDSA
.............

ECDSA is a variant of the DSA digital signature scheme (*note DSA::),
which works over an elliptic curve group rather than over a (subgroup
of) integers modulo p.  Like DSA, creating a signature requires a unique
random nonce (repeating the nonce with two different messages reveals
the private key, and any leak or bias in the generation of the nonce
also leaks information about the key).

   Unlike DSA, signatures are in general not tied to any particular hash
function or even hash size.  Any hash function can be used, and the hash
value is truncated or padded as needed to get a size matching the curve
being used.  It is recommended to use a strong cryptographic hash
function with digest size close to the bit size of the curve, e.g.,
SHA256 is a reasonable choice when using ECDSA signature over the curve
secp256r1.  A protocol or application using ECDSA has to specify which
curve and which hash function to use, or provide some mechanism for
negotiating.

   Nettle defines ECDSA in ‘<nettle/ecdsa.h>’.  We first need to define
the data types used to represent public and private keys.

 -- struct: struct ecc_point
     Represents a point on an elliptic curve.  In particular, it is used
     to represent an ECDSA public key.

 -- Function: void ecc_point_init (struct ecc_point *P, const struct
          ecc_curve *ECC)
     Initializes P to represent points on the given curve ECC.
     Allocates storage for the coordinates, using the same allocation
     functions as GMP.

 -- Function: void ecc_point_clear (struct ecc_point *P)
     Deallocate storage allocated by previous ecc_point_init.

 -- Function: int ecc_point_set (struct ecc_point *P, const mpz_t X,
          const mpz_t Y)
     Check that the given coordinates represent a point on the curve.
     If so, the coordinates are copied and converted to internal
     representation, and the function returns 1.  Otherwise, it returns
     0.  Currently, the infinity point (or zero point, with additive
     notation) is not allowed.

 -- Function: void ecc_point_get (const struct ecc_point *P, mpz_t X,
          mpz_t Y)
     Extracts the coordinate of the point P.  The output parameters X or
     Y may be NULL if the caller doesn't want that coordinate.

 -- struct: struct ecc_scalar
     Represents an integer in the range 0 < x < group order, where the
     "group order" refers to the order of an ECC group.  In particular,
     it is used to represent an ECDSA private key.

 -- Function: void ecc_scalar_init (struct ecc_scalar *S, const struct
          ecc_curve *ECC)
     Initializes S to represent a scalar suitable for the given curve
     ECC.  Allocates storage using the same allocation functions as GMP.

 -- Function: void ecc_scalar_clear (struct ecc_scalar *S)
     Deallocate the storage allocated by previous ecc_scalar_init.

 -- Function: int ecc_scalar_set (struct ecc_scalar *S, const mpz_t Z)
     Check that Z is in the correct range.  If so, copies the value to S
     and returns 1, otherwise returns 0.

 -- Function: void ecc_scalar_get (const struct ecc_scalar *S, mpz_t Z)
     Extracts the scalar, in GMP ‘mpz_t’ representation.

   To create and verify ECDSA signatures, the following functions are
used.

 -- Function: void ecdsa_sign (const struct ecc_scalar *KEY, void
          *RANDOM_CTX, nettle_random_func *RANDOM, size_t DIGEST_LENGTH,
          const uint8_t *DIGEST, struct dsa_signature *SIGNATURE)
     Uses the private key KEY to create a signature of DIGEST.
     RANDOM_CTX and RANDOM is a randomness generator.
     ‘random(random_ctx, length, dst)’ should generate ‘length’ random
     octets and store them at ‘dst’.  The signature is stored in
     SIGNATURE, in the same way as for plain DSA.

 -- Function: int ecdsa_verify (const struct ecc_point *PUB, size_t
          LENGTH, const uint8_t *DIGEST, const struct dsa_signature
          *SIGNATURE)
     Uses the public key PUB to verify that SIGNATURE is a valid
     signature for the message digest DIGEST (of LENGTH octets).
     Returns 1 if the signature is valid, otherwise 0.

   Finally, generating a new ECDSA key pair:

 -- Function: void ecdsa_generate_keypair (struct ecc_point *PUB, struct
          ecc_scalar *KEY, void *RANDOM_CTX, nettle_random_func *RANDOM)
     PUB and KEY is where the resulting key pair is stored.  The structs
     should be initialized, for the desired ECC curve, before you call
     this function.

     RANDOM_CTX and RANDOM is a randomness generator.
     ‘random(random_ctx, length, dst)’ should generate ‘length’ random
     octets and store them at ‘dst’.  For advice, see *Note
     Randomness::.


File: nettle.info,  Node: GOSTDSA,  Next: Curve 25519 and Curve 448,  Prev: ECDSA,  Up: Elliptic curves

4.7.3.3 GOSTDSA
...............

GOSTDSA (GOST R 34.10-2001, GOST R 34.10-2012) is a variant of the DSA
(*note DSA::) and ECDSA (*note ECDSA::) digital signature schemes, which
works over an elliptic curve group.  Original documents are written in
Russian.  English translations are provided in ‘RFC 5832’ and ‘RFC
7091’.  While technically nothing stops one from using GOSTDSA over any
curve, it is defined only over several 256 and 512-bit curves.  Like DSA
and ECDSA, creating a signature requires a unique random nonce
(repeating the nonce with two different messages reveals the private
key, and any leak or bias in the generation of the nonce also leaks
information about the key).

   GOST R 34.10-2001 was defined to use GOST R 34.11-94 hash function
(GOSTHASH94 and GOSTHASH94CP, ‘RFC 5831’).  GOST R 34.10-2012 is defined
to use GOST R 34.11-2012 hash function (Streebog, ‘RFC 6986’) of
corresponding size (256 or 512) depending on curve size.

   Nettle defines GOSTDSA in ‘<nettle/gostdsa.h>’.  GOSTDSA reuses ECDSA
data types (‘struct ecc_point’, ‘struct ecc_scalar’) to represent public
and private keys.  Also to generate a new GOSTDSA key pair one has to
use ‘ecdsa_generate_keypair()’ function.

   To create and verify GOSTDSA signatures, the following functions are
used.

 -- Function: void gostdsa_sign (const struct ecc_scalar *KEY, void
          *RANDOM_CTX, nettle_random_func *RANDOM, size_t DIGEST_LENGTH,
          const uint8_t *DIGEST, struct dsa_signature *SIGNATURE)
     Uses the private key KEY to create a signature of DIGEST.
     RANDOM_CTX and RANDOM is a randomness generator.
     ‘random(random_ctx, length, dst)’ should generate ‘length’ random
     octets and store them at ‘dst’.  The signature is stored in
     SIGNATURE, in the same was as for plain DSA.

 -- Function: int gostdsa_verify (const struct ecc_point *PUB, size_t
          LENGTH, const uint8_t *DIGEST, const struct dsa_signature
          *SIGNATURE)
     Uses the public key PUB to verify that SIGNATURE is a valid
     signature for the message digest DIGEST (of LENGTH octets).
     Returns 1 if the signature is valid, otherwise 0.

   For historical reason several curve IDs (OIDs) may correspond to a
single curve/generator combination.  Following list defines
correspondence between nettle's view on curves and actual identifiers
defined in ‘RFC 4357’ and ‘RFC 7836’.

 -- Function: const struct ecc_curve nettle_get_gost_gc256b (void)
     Returns curve corresponding to following identifiers:
        • id-GostR3410-2001-CryptoPro-A-ParamSet (‘RFC 4357’)
        • id-GostR3410-2001-CryptoPro-XchA-ParamSet (‘RFC 4357’)
        • id-tc26-gost-3410-12-256-paramSetB

 -- Function: const struct ecc_curve nettle_get_gost_gc512a (void)
     Returns curve corresponding to following identifiers:
        • id-tc26-gost-3410-12-512-paramSetA (‘RFC 7836’)

   For GOST key pairs key derivation/key agreement function (VKO) is
defined in ‘RFC 4357’ and ‘RFC 7836’.  Basically shared key is equal to
hash(cofactor * ukm * priv * pub).  Nettle library provides a function
that does multiplication.  Caller should do hashing on his own (it will
be either GOST R 34.11-94 (*note GOSTHASH94CP::) or GOST R 34.11-2012,
Streebog, which nor part of the library yet).

 -- Function: void gostdsa_vko (const struct ecc_scalar *PRIV, const
          struct ecc_point *PUB, size_t UKM_LENGTH, const uint8_t *UKM,
          uint8_t *OUT)
     Uses private key PRIV, public ket PUB and shared key material UKM
     to generate shared secret, written to buffer OUT.  The buffer
     should be of the size equal to 2 private key lengths: 64 bytes for
     256 bit curves and 128 bytes for 512 bit ones.  UKM is a shared key
     material, usually transferred in cleartext.  It does not have to be
     secret.


File: nettle.info,  Node: Curve 25519 and Curve 448,  Prev: GOSTDSA,  Up: Elliptic curves

4.7.3.4 Curve25519 and Curve448
...............................

Curve25519 is an elliptic curve of Montgomery type, y^2 = x^3 + 486662
x^2 + x (mod p), with p = 2^255 - 19.  Montgomery curves have the
advantage of simple and efficient point addition based on the
x-coordinate only.  This particular curve was proposed by D. J.
Bernstein in 2006, for fast Diffie-Hellman key exchange, and is also
described in ‘RFC 7748’.  The group generator is defined by x = 9 (there
are actually two points with x = 9, differing by the sign of the
y-coordinate, but that doesn't matter for the curve25519 operations
which work with the x-coordinate only).

   The curve25519 functions are defined as operations on octet strings,
representing 255-bit scalars or x-coordinates, in little-endian byte
order.  The most significant input bit, i.e, the most significant bit of
the last octet, is always ignored.

   For scalars, in addition, the least significant three bits are
ignored, and treated as zero, and the second most significant bit is
ignored too, and treated as one.  Then the scalar input string always
represents 8 times a number in the range 2^251 <= s < 2^252.

   Of all the possible input strings, only about half correspond to
x-coordinates of points on curve25519, i.e., a value x for which the the
curve equation can be solved for y.  The other half correspond to points
on a related "twist curve".  The function ‘curve25519_mul’ uses a
Montgomery ladder for the scalar multiplication, as suggested in the
curve25519 literature, and required by ‘RFC 7748’.  The output is
therefore well defined for _all_ possible inputs, no matter if the input
string represents a valid point on the curve or not.

   Note that the curve25519 implementation in earlier versions of Nettle
deviates slightly from ‘RFC 7748’, in that bit 255 of the x coordinate
of the point input to curve25519_mul was not ignored.  The
‘nette/curve25519.h’ defines a preprocessor symbol
‘NETTLE_CURVE25519_RFC7748’ to indicate conformance with the standard.

   Nettle defines Curve 25519 in ‘<nettle/curve25519.h>’.

 -- Constant: NETTLE_CURVE25519_RFC7748
     Defined to 1 in Nettle versions conforming to RFC 7748.  Undefined
     in earlier versions.

 -- Constant: CURVE25519_SIZE
     The size of the strings representing curve25519 points and scalars,
     32.

 -- Function: void curve25519_mul_g (uint8_t *Q, const uint8_t *N)
     Computes Q = N G, where G is the group generator and N is an
     integer.  The input argument N and the output argument Q use a
     little-endian representation of the scalar and the x-coordinate,
     respectively.  They are both of size ‘CURVE25519_SIZE’.

     This function is intended to be compatible with the function
     ‘crypto_scalar_mult_base’ in the NaCl library.

 -- Function: void curve25519_mul (uint8_t *Q, const uint8_t *N, const
          uint8_t *P)
     Computes Q = N P, where P is an input point and N is an integer.
     The input arguments N and P and the output argument Q use a
     little-endian representation of the scalar and the x-coordinates,
     respectively.  They are all of size ‘CURVE25519_SIZE’.

     This function is intended to be compatible with the function
     ‘crypto_scalar_mult’ in the NaCl library.

   Similarly, Nettle also implements Curve448, an elliptic curve of
Montgomery type, y^2 = x^3 + 156326 x^2 + x (mod p), with p = 2^448 -
2^224 - 1.  This particular curve was proposed by Mike Hamburg in 2015,
for fast Diffie-Hellman key exchange, and is also described in ‘RFC
7748’.

   Nettle defines Curve 448 in ‘<nettle/curve448.h>’.

 -- Constant: CURVE448_SIZE
     The octet length of the strings representing curve448 points and
     scalars, 56.

 -- Function: void curve448_mul_g (uint8_t *Q, const uint8_t *N)
     Computes Q = N G, where G is the group generator and N is an
     integer.  The input argument N and the output argument Q use a
     little-endian representation of the scalar and the x-coordinate,
     respectively.  They are both of size ‘CURVE448_SIZE’.

     This function is intended to be compatible with the function
     ‘crypto_scalar_mult_base’ in the NaCl library.

 -- Function: void curve448_mul (uint8_t *Q, const uint8_t *N, const
          uint8_t *P)
     Computes Q = N P, where P is an input point and N is an integer.
     The input arguments N and P and the output argument Q use a
     little-endian representation of the scalar and the x-coordinates,
     respectively.  They are all of size ‘CURVE448_SIZE’.

     This function is intended to be compatible with the function
     ‘crypto_scalar_mult’ in the NaCl library.

4.7.3.5 EdDSA
.............

EdDSA is a signature scheme proposed by D. J. Bernstein et al.  in 2011.
It is defined using a "Twisted Edwards curve", of the form -x^2 + y^2 =
1 + d x^2 y^2.  The specific signature scheme Ed25519 uses a curve which
is equivalent to curve25519: The two groups used differ only by a simple
change of coordinates, so that the discrete logarithm problem is of
equal difficulty in both groups.

   Unlike other signature schemes in Nettle, the input to the EdDSA sign
and verify functions is the possibly large message itself, not a hash
digest.  EdDSA is a variant of Schnorr signatures, where the message is
hashed together with other data during the signature process, providing
resilience to hash-collisions: A successful attack finding collisions in
the hash function does not automatically translate into an attack to
forge signatures.  EdDSA also avoids the use of a randomness source by
generating the needed signature nonce from a hash of the private key and
the message, which means that the message is actually hashed twice when
creating a signature.  If signing huge messages, it is possible to hash
the message first and pass the short message digest as input to the sign
and verify functions, however, the resilience to hash collision is then
lost.

 -- Constant: ED25519_KEY_SIZE
     The size of a private or public Ed25519 key, 32 octets.

 -- Constant: ED25519_SIGNATURE_SIZE
     The size of an Ed25519 signature, 64 octets.

 -- Function: void ed25519_sha512_public_key (uint8_t *PUB, const
          uint8_t *PRIV)
     Computes the public key corresponding to the given private key.
     Both input and output are of size ‘ED25519_KEY_SIZE’.

 -- Function: void ed25519_sha512_sign (const uint8_t *PUB, const
          uint8_t *PRIV, size_t LENGTH, const uint8_t *MSG, uint8_t
          *SIGNATURE)
     Signs a message using the provided key pair.

 -- Function: int ed25519_sha512_verify (const uint8_t *PUB, size_t
          LENGTH, const uint8_t *MSG, const uint8_t *SIGNATURE)
     Verifies a message using the provided public key.  Returns 1 if the
     signature is valid, otherwise 0.

   Nettle also provides Ed448, an EdDSA signature scheme based on an
Edwards curve equivalent to curve448.

 -- Constant: ED448_KEY_SIZE
     The size of a private or public Ed448 key, 57 octets.

 -- Constant: ED448_SIGNATURE_SIZE
     The size of an Ed448 signature, 114 octets.

 -- Function: void ed448_shake256_public_key (uint8_t *PUB, const
          uint8_t *PRIV)
     Computes the public key corresponding to the given private key.
     Both input and output are of size ‘ED448_KEY_SIZE’.

 -- Function: void ed448_shake256_sign (const uint8_t *PUB, const
          uint8_t *PRIV, size_t LENGTH, const uint8_t *MSG, uint8_t
          *SIGNATURE)
     Signs a message using the provided key pair.

 -- Function: int ed448_shake256_verify (const uint8_t *PUB, size_t
          LENGTH, const uint8_t *MSG, const uint8_t *SIGNATURE)
     Verifies a message using the provided public key.  Returns 1 if the
     signature is valid, otherwise 0.


File: nettle.info,  Node: SLH-DSA,  Prev: Elliptic curves,  Up: Public-key algorithms

4.7.4 SLH-DSA
-------------

SLH-DSA stands for Stateless hash-based digital signature algorithm.  As
the name suggests, its security is based on a cryptographic hash
function.  It is intended to be secure against an attacker with a large
working quantum computer, often referred to as a "post-quantum"
cryptographic algorithm.  This is in contrast to "classical" public key
algorithms based on the difficulty of the discrete logarithm problem or
the factoring problem, because those problems can be solved efficiently
if or when the attacker has a large scale quantum computer at their
disposal.

   The SLH-DSA algorithm was standardized by NIST in 2024, as
‘FIPS-205’, based on an algorithm proposal called SPHINCS+.  Public and
private keys are small, while signatures are rather large, 7856 octets
for the variant with smallest signatures.

   The main idea is that the private key is used as the seed for a
pseudorandom generation of a large number of secret values.  Each secret
value is hashed, and the hashes are combined pairwise into a Merkle
tree.  The hash at the root of the Merkle tree is one piece of the
public key.  The holder of the private key can then prove knowledge of
the private key by revealing one of the secret values, together with a
Merkle tree inclusion proof that proves that the value is included in
the public hash at the root of the tree.  This idea is turned into a
practical signature scheme by combining several variants of hash-based
signatures and Merkle trees.  The selection of secret values to reveal
as part of an SLH-DSA signature depends on both the message and a
deterministically generated nonce (also referred to as the message
"randomizer").

   Verifying an SLH-DSA signature boils down to verifying a number of
Merkle inclusion proofs, which is pretty fast; performance is in the
same ballpark as verifying elliptic curve signatures.  Signing, on the
other hand, needs to produce all those inclusion proofs, which requires
traversal of all leaves of the corresponding Merkle trees, and this is
several orders of magnitude slower than signing using elliptic curves or
RSA.

   Nettle currently implements the four SLH-DSA variants designed for
"128-bit security": There's the choice of either SHA256 (in the SHA2
family) or SHAKE256 (in the SHA3 family) as the underlying hash
function.  For either hash function, there's a "small" variant with
smaller signature size and slower signing (but faster verify operation,
since verify time depends directly on the signature size), and a "fast"
variant with faster signing time, larger signatures (and a slower verify
operation).

   Both the private and public keys are of the same size, and each
consists of two halves.  It's somewhat peculiar that the public key is
not derived deterministically from the private key, instead, the first
half of the public key is a random seed value that should be generated
independently of the private key, while the second half is the Merkle
tree root hash that depends both on the private key and this public
seed.

   Nettle defines SLH-DSA in ‘nettle/slh-dsa.h’.

 -- Constant: SLH_DSA_128_KEY_SIZE
     Size in octets of public and private keys, 32, for SLH-DSA with
     128-bit security level.
 -- Constant: SLH_DSA_128_SEED_SIZE
     Size in octets of the "seed" half of a private or public key, 16.
 -- Constant: SLH_DSA_128S_SIGNATURE_SIZE
     Signature size in octets for SLH-DSA with 128-bit security and the
     "small" variant, 7856.
 -- Constant: SLH_DSA_128F_SIGNATURE_SIZE
     Signature size in octets for SLH-DSA with 128-bit security and the
     "fast" variant, 17088.

 -- Function: void slh_dsa_shake_128s_generate_keypair (uint8_t *PUB,
          uint8_t *KEY, void *RANDOM_CTX, nettle_random_func *RANDOM)
 -- Function: void slh_dsa_shake_128f_generate_keypair (uint8_t *PUB,
          uint8_t *KEY, void *RANDOM_CTX, nettle_random_func *RANDOM)
 -- Function: void slh_dsa_sha2_128s_generate_keypair (uint8_t *PUB,
          uint8_t *KEY, void *RANDOM_CTX, nettle_random_func *RANDOM)
 -- Function: void slh_dsa_sha2_128f_generate_keypair (uint8_t *PUB,
          uint8_t *KEY, void *RANDOM_CTX, nettle_random_func *RANDOM)
     Generate a new keypair, public key stored at PUB, private key
     stored at KEY, both of size ‘SLH_DSA_128_KEY_SIZE’.  RANDOM_CTX and
     RANDOM is a randomness generator.  ‘random(random_ctx, length,
     dst)’ should generate ‘length’ random octets and store them at
     ‘dst’.

 -- Function: void slh_dsa_shake_128s_root (const uint8_t *PUBLIC_SEED,
          const uint8_t *PRIVATE_SEED, uint8_t *ROOT)
 -- Function: void slh_dsa_shake_128f_root (const uint8_t *PUBLIC_SEED,
          const uint8_t *PRIVATE_SEED, uint8_t *ROOT)
 -- Function: void slh_dsa_sha2_128s_root (const uint8_t *PUBLIC_SEED,
          const uint8_t *PRIVATE_SEED, uint8_t *ROOT)
 -- Function: void slh_dsa_sha2_128f_root (const uint8_t *PUBLIC_SEED,
          const uint8_t *PRIVATE_SEED, uint8_t *ROOT)
     Perform the deterministic part of key generation.  PUBLIC_SEED and
     PRIVATE_SEED are the first halves of respective key.  ROOT, the
     output of this function, is the second half of the public key,
     i.e., typically called with ROOT = PUBLIC_SEED +
     ‘SLH_DSA_128_SEED_SIZE’.

 -- Function: void slh_dsa_shake_128s_sign (const uint8_t *PUB, const
          uint8_t *PRIV, size_t LENGTH, const uint8_t *MSG, uint8_t
          *SIGNATURE)
 -- Function: void slh_dsa_shake_128f_sign (const uint8_t *PUB, const
          uint8_t *PRIV, size_t LENGTH, const uint8_t *MSG, uint8_t
          *SIGNATURE)
 -- Function: void slh_dsa_sha2_128s_sign (const uint8_t *PUB, const
          uint8_t *PRIV, size_t LENGTH, const uint8_t *MSG, uint8_t
          *SIGNATURE)
 -- Function: void slh_dsa_sha2_128f_sign (const uint8_t *PUB, const
          uint8_t *PRIV, size_t LENGTH, const uint8_t *MSG, uint8_t
          *SIGNATURE)
     Signs a message using the provided key pair.  The size of the
     resulting signature is ‘SLH_DSA_128S_SIGNATURE_SIZE’ or
     ‘SLH_DSA_128F_SIGNATURE_SIZE’ for respective functions.

 -- Function: int slh_dsa_shake_128s_verify (const uint8_t *PUB, size_t
          LENGTH, const uint8_t *MSG, const uint8_t *SIGNATURE)
 -- Function: int slh_dsa_shake_128f_verify (const uint8_t *PUB, size_t
          LENGTH, const uint8_t *MSG, const uint8_t *SIGNATURE)
 -- Function: int slh_dsa_sha2_128s_verify (const uint8_t *PUB, size_t
          LENGTH, const uint8_t *MSG, const uint8_t *SIGNATURE)
 -- Function: int slh_dsa_sha2_128f_verify (const uint8_t *PUB, size_t
          LENGTH, const uint8_t *MSG, const uint8_t *SIGNATURE)
     Verifies a message using the provided public key.  Returns 1 if the
     signature is valid, otherwise 0.


File: nettle.info,  Node: Randomness,  Next: ASCII encoding,  Prev: Public-key algorithms,  Up: Reference

4.8 Randomness
==============

A crucial ingredient in many cryptographic contexts is randomness: Let
‘p’ be a random prime, choose a random initialization vector ‘iv’, a
random key ‘k’ and a random exponent ‘e’, etc.  In the theories, it is
assumed that you have plenty of randomness around.  If this assumption
is not true in practice, systems that are otherwise perfectly secure,
can be broken.  Randomness has often turned out to be the weakest link
in the chain.

   Building a good randomness source is subtle, in particular if your
program may run inside several layers of virtualization.  Today, most
operating system provides a good randomness source, e.g., ‘/dev/random’
and the ‘getrandom’ syscall on GNU/Linux.  Please use that, possibly in
combination with a KDF!  If for some reason that is not possible and you
_have_ to roll your own, the rest of this section provides some advice.

   In non-cryptographic applications, such as games as well as
scientific simulation, a good randomness generator usually means a
generator that has good statistical properties, and is seeded by some
simple function of things like the current time, process id, and host
name.

   However, such a generator is inadequate for cryptography, for at
least two reasons:

   • It's too easy for an attacker to guess the initial seed.  Even if
     it will take some 2^32 tries before he guesses right, that's far
     too easy.  For example, if the process id is 16 bits, the
     resolution of "current time" is one second, and the attacker knows
     what day the generator was seeded, there are only about 2^32
     possibilities to try if all possible values for the process id and
     time-of-day are tried.

   • The generator output reveals too much.  By observing only a small
     segment of the generator's output, its internal state can be
     recovered, and from there, all previous output and all future
     output can be computed by the attacker.

   A randomness generator that is used for cryptographic purposes must
have better properties.  Let's first look at the seeding, as the issues
here are mostly independent of the rest of the generator.  The initial
state of the generator (its seed) must be unguessable by the attacker.
So what's unguessable?  It depends on what the attacker already knows.
The concept used in information theory to reason about such things is
called "entropy", or "conditional entropy" (not to be confused with the
thermodynamic concept with the same name).  A reasonable requirement is
that the seed contains a conditional entropy of at least some 80-100
bits.  This property can be explained as follows: Allow the attacker to
ask ‘n’ yes-no-questions, of his own choice, about the seed.  If the
attacker, using this question-and-answer session, as well as any other
information he knows about the seeding process, still can't guess the
seed correctly, then the conditional entropy is more than ‘n’ bits.

   Let's look at an example.  Say information about timing of received
network packets is used in the seeding process.  If there is some random
network traffic going on, this will contribute some bits of entropy or
"unguessability" to the seed.  However, if the attacker can listen in to
the local network, or if all but a small number of the packets were
transmitted by machines that the attacker can monitor, this additional
information makes the seed easier for the attacker to figure out.  Even
if the information is exactly the same, the conditional entropy, or
unguessability, is smaller for an attacker that knows some of it already
before the hypothetical question-and-answer session.

   Seeding of good generators is usually based on several sources.  The
key point here is that the amount of unguessability that each source
contributes, depends on who the attacker is.  Some sources that have
been used are:

High resolution timing of i/o activities
     Such as completed blocks from spinning hard disks, network packets,
     etc.  Getting access to such information is quite system dependent,
     and not all systems include suitable hardware.  If available, it's
     one of the better randomness source one can find in a digital,
     mostly predictable, computer.

User activity
     Timing and contents of user interaction events is another popular
     source that is available for interactive programs (even if I
     suspect that it is sometimes used in order to make the user feel
     good, not because the quality of the input is needed or used
     properly).  Obviously, not available when a machine is unattended.
     Also beware of networks: User interaction that happens across a
     long serial cable, TELNET session, or even SSH session may be
     visible to an attacker, in full or partially.

Audio input
     Any room, or even a microphone input that's left unconnected, is a
     source of some random background noise, which can be fed into the
     seeding process.

Specialized hardware
     Hardware devices with the sole purpose of generating random data
     have been designed.  They range from radioactive samples with an
     attached Geiger counter, to amplification of the inherent noise in
     electronic components such as diodes and resistors, to
     low-frequency sampling of chaotic systems.  Hashing successive
     images of a Lava lamp is a spectacular example of the latter type.

Secret information
     Secret information, such as user passwords or keys, or private
     files stored on disk, can provide some unguessability.  A problem
     is that if the information is revealed at a later time, the
     unguessability vanishes.  Another problem is that this kind of
     information tends to be fairly constant, so if you rely on it and
     seed your generator regularly, you risk constructing almost similar
     seeds or even constructing the same seed more than once.

   For all practical sources, it's difficult but important to provide a
reliable lower bound on the amount of unguessability that it provides.
Two important points are to make sure that the attacker can't observe
your sources (so if you like the Lava lamp idea, remember that you have
to get your own lamp, and not put it by a window or anywhere else where
strangers can see it), and that hardware failures are detected.  What if
the bulb in the Lava lamp, which you keep locked into a cupboard
following the above advice, breaks after a few months?

   So let's assume that we have been able to find an unguessable seed,
which contains at least 80 bits of conditional entropy, relative to all
attackers that we care about (typically, we must at the very least
assume that no attacker has root privileges on our machine).

   How do we generate output from this seed, and how much can we get?
Some generators (notably older versions of the Linux ‘/dev/random’
generator) tries to estimate available entropy and restrict the amount
of output.  The goal was that if you read 512 bits from ‘/dev/random’,
you should get 512 "truly random" bits.  This is a property that is
useful in some specialized circumstances, for instance when generating
key material for a one time pad, or when working with unconditional
blinding, but in most cases, it doesn't matter much.  For most
application, there's no limit on the amount of useful "random" data that
we can generate from a small seed; what matters is that the seed is
unguessable and that the generator has good cryptographic properties.

   At the heart of all generators lies its internal state.  Future
output is determined by the internal state alone.  Let's call it the
generator's key.  The key is initialized from the unguessable seed.
Important properties of a generator are:

“Key-hiding”
     An attacker observing the output should not be able to recover the
     generator's key.

“Independence of outputs”
     Observing some of the output should not help the attacker to guess
     previous or future output.

“Forward secrecy”
     Even if an attacker compromises the generator's key, he should not
     be able to guess the generator output _before_ the key compromise.

“Recovery from key compromise”
     If an attacker compromises the generator's key, he can compute
     _all_ future output.  This is inevitable if the generator is seeded
     only once, at startup.  However, the generator can provide a
     reseeding mechanism, to achieve recovery from key compromise.  More
     precisely: If the attacker compromises the key at a particular time
     ‘t_1’, there is another later time ‘t_2’, such that if the attacker
     observes all output generated between ‘t_1’ and ‘t_2’, he still
     can't guess what output is generated after ‘t_2’.

   Nettle includes one randomness generator that is believed to have all
the above properties, and two simpler ones.

   ChaCha (*note ChaCha::), like any stream cipher, can be used as a
randomness generator.  Its output should be of reasonable quality.
There's no single natural way to reseed it, but if you need reseeding,
you should be using Yarrow instead.  Historically ARCFOUR (*note
Arcfour::) has been used as a randomness generator, however it is known
to be distinguishable from random data and the output leaks information
about the key.

   The "lagged Fibonacci" generator in ‘<nettle/knuth-lfib.h>’ is a fast
generator with good statistical properties, but is *not* for
cryptographic use, and therefore not documented here.  It is included
mostly because the Nettle test suite needs to generate some test data
from a small seed.

   The recommended generator to use is Yarrow, described below.

4.8.1 Yarrow
------------

Yarrow is a family of pseudo-randomness generators, designed for
cryptographic use, by John Kelsey, Bruce Schneier and Niels Ferguson.
Yarrow-160 is described in a paper at
<https://www.schneier.com/academic/yarrow/>, and it uses SHA1 and
triple-DES, and has a 160-bit internal state.  Nettle implements
Yarrow-256, which is similar, but uses SHA256 and AES to get an internal
state of 256 bits.

   Yarrow was an almost finished project, the paper mentioned above is
the closest thing to a specification for it, but some smaller details
are left out.  There is no official reference implementation or test
cases.  This section includes an overview of Yarrow, but for the details
of Yarrow-256, as implemented by Nettle, you have to consult the source
code.  Maybe a complete specification can be written later.

   Yarrow can use many sources (at least two are needed for proper
reseeding), and two randomness "pools", referred to as the "slow pool"
and the "fast pool".  Input from the sources is fed alternatingly into
the two pools.  When one of the sources has contributed 100 bits of
entropy to the fast pool, a "fast reseed" happens and the fast pool is
mixed into the internal state.  When at least two of the sources have
contributed at least 160 bits each to the slow pool, a "slow reseed"
takes place.  The contents of both pools are mixed into the internal
state.  These procedures should ensure that the generator will
eventually recover after a key compromise.

   The output is generated by using AES to encrypt a counter, using the
generator's current key.  After each request for output, another 256
bits are generated which replace the key.  This ensures forward secrecy.

   Yarrow can also use a “seed file” to save state across restarts.
Yarrow is seeded by either feeding it the contents of the previous seed
file, or feeding it input from its sources until a slow reseed happens.

   Nettle defines Yarrow-256 in ‘<nettle/yarrow.h>’.

 -- Context struct: struct yarrow256_ctx

 -- Context struct: struct yarrow_source
     Information about a single source.

 -- Constant: YARROW256_SEED_FILE_SIZE
     Recommended size of the Yarrow-256 seed file.

 -- Function: void yarrow256_init (struct yarrow256_ctx *CTX, unsigned
          NSOURCES, struct yarrow_source *SOURCES)
     Initializes the yarrow context, and its NSOURCES sources.  It's
     possible to call it with NSOURCES=0 and SOURCES=NULL, if you don't
     need the update features.

 -- Function: void yarrow256_seed (struct yarrow256_ctx *CTX, size_t
          LENGTH, uint8_t *SEED_FILE)
     Seeds Yarrow-256 from a previous seed file.  LENGTH should be at
     least ‘YARROW256_SEED_FILE_SIZE’, but it can be larger.

     The generator will trust you that the SEED_FILE data really is
     unguessable.  After calling this function, you _must_ overwrite the
     old seed file with newly generated data from ‘yarrow256_random’.
     If it's possible for several processes to read the seed file at
     about the same time, access must be coordinated using some locking
     mechanism.

 -- Function: int yarrow256_update (struct yarrow256_ctx *CTX, unsigned
          SOURCE, unsigned ENTROPY, size_t LENGTH, const uint8_t *DATA)
     Updates the generator with data from source SOURCE (an index that
     must be smaller than the number of sources).  ENTROPY is your
     estimated lower bound for the entropy in the data, measured in
     bits.  Calling update with zero ENTROPY is always safe, no matter
     if the data is random or not.

     Returns 1 if a reseed happened, in which case an application using
     a seed file may want to generate new seed data with
     ‘yarrow256_random’ and overwrite the seed file.  Otherwise, the
     function returns 0.

 -- Function: void yarrow256_random (struct yarrow256_ctx *CTX, size_t
          LENGTH, uint8_t *DST)
     Generates LENGTH octets of output.  The generator must be seeded
     before you call this function.

     If you don't need forward secrecy, e.g.  if you need non-secret
     randomness for initialization vectors or padding, you can gain some
     efficiency by buffering, calling this function for reasonably large
     blocks of data, say 100-1000 octets at a time.

 -- Function: int yarrow256_is_seeded (struct yarrow256_ctx *CTX)
     Returns 1 if the generator is seeded and ready to generate output,
     otherwise 0.

 -- Function: unsigned yarrow256_needed_sources (struct yarrow256_ctx
          *CTX)
     Returns the number of sources that must reach the threshold before
     a slow reseed will happen.  Useful primarily when the generator is
     unseeded.

 -- Function: void yarrow256_fast_reseed (struct yarrow256_ctx *CTX)
 -- Function: void yarrow256_slow_reseed (struct yarrow256_ctx *CTX)
     Causes a fast or slow reseed to take place immediately, regardless
     of the current entropy estimates of the two pools.  Use with care.

   Nettle includes an entropy estimator for one kind of input source:
User keyboard input.

 -- Context struct: struct yarrow_key_event_ctx
     Information about recent key events.

 -- Function: void yarrow_key_event_init (struct yarrow_key_event_ctx
          *CTX)
     Initializes the context.

 -- Function: unsigned yarrow_key_event_estimate (struct
          yarrow_key_event_ctx *CTX, unsigned KEY, unsigned TIME)
     KEY is the id of the key (ASCII value, hardware key code, X keysym,
     ..., it doesn't matter), and TIME is the timestamp of the event.
     The time must be given in units matching the resolution by which
     you read the clock.  If you read the clock with microsecond
     precision, TIME should be provided in units of microseconds.  But
     if you use ‘gettimeofday’ on a typical Unix system where the clock
     ticks 10 or so microseconds at a time, TIME should be given in
     units of 10 microseconds.

     Returns an entropy estimate, in bits, suitable for calling
     ‘yarrow256_update’.  Usually, 0, 1 or 2 bits.

4.8.2 DRBG-CTR
--------------

The Deterministic Random Bit Generator (DRBG) family is a complex family
of deterministic randomness generators published by NIST in SP 800-90A.

   We support what we believe is the reasonable parts of the CTR_DRBG
algorithm for AES256.  Re-seeding, personalization strings, derivation
functions and support for non-AES256 is not implemented.

   Re-seeding and personalization strings can be implemented by the
caller, if desired.  To implement re-seeding, use
‘drbg_ctr_aes256_update’.  Similarly, personalization strings can be
implemented with ‘memxor’.  If you need entropy derivation, we suggest
that you use Yarrow instead.

   The security bounds of DRBG-CTR are not intuitive, see "Security
Bounds for the NIST Codebook-based Deterministic Random Bit Generator"
by Matthew J. Campagna, from <https://eprint.iacr.org/2006/379.pdf>.

   Our suggested use-case for DRBG-CTR is to deterministically generate
known values from a seed when comparing against expected values for some
other algorithm.

   Nettle defines DRBG-CTR in ‘<nettle/drbg-ctr.h>’.

 -- Context struct: struct drbg_ctr_aes256_ctx

 -- Constant: DRBG_CTR_AES256_SEED_SIZE
     The size of the seeding material.

 -- Function: void drbg_ctr_aes256_init (struct drbg_ctr_aes256_ctx
          *CTX, uint8_t *SEED_MATERIAL)
     Initialize the DRBG-CTR-AES256 context using
     ‘DRBG_CTR_AES256_SEED_SIZE’ bytes of SEED_MATERIAL.

 -- Function: void drbg_ctr_aes256_random (struct drbg_ctr_aes256_ctx
          *CTX, size_t n, uint8_t *DST)
     Generates N octets of output into DST.  The generator must be
     initialized before you call this function.

 -- Function: void drbg_ctr_aes256_update (struct drbg_ctr_aes256_ctx
          *CTX, const uint8_t *PROVIDED_DATA)
     Updates the internal state of CTX with PROVIDED_DATA, which is
     either NULL or a pointer to data of ‘DRBG_CTR_AES256_SEED_SIZE’
     octets.  This function is used for re-seeding.


File: nettle.info,  Node: ASCII encoding,  Next: Miscellaneous functions,  Prev: Randomness,  Up: Reference

4.9 ASCII encoding
==================

Encryption will transform your data from text into binary format, and
that may be a problem if, for example, you want to send the data as if
it was plain text in an email, or store it along with descriptive text
in a file.  You may then use an encoding from binary to text: each
binary byte is translated into a number of bytes of plain text.

   A base-N encoding of data is one representation of data that only
uses N different symbols (instead of the 256 possible values of a byte).

   The base64 encoding will always use alphanumeric (upper and lower
case) characters and the '+', '/' and '=' symbols to represent the data.
Four output characters are generated for each three bytes of input.  In
case the length of the input is not a multiple of three, padding
characters are added at the end.  There's also a "URL safe" variant,
which is useful for encoding binary data into URLs and filenames.  See
‘RFC 4648’.

   The base16 encoding, also known as "hexadecimal", uses the decimal
digits and the letters from A to F. Two hexadecimal digits are generated
for each input byte.

   Nettle supports both base64 and base16 encoding and decoding.

   Encoding and decoding uses a context struct to maintain its state
(with the exception of base16 encoding, which doesn't need any).  To
encode or decode the data, first initialize the context, then call the
update function as many times as necessary, and complete the operation
by calling the final function.

   The following functions can be used to perform base64 encoding and
decoding.  They are defined in ‘<nettle/base64.h>’.

 -- Context struct: struct base64_encode_ctx

 -- Function: void base64_encode_init (struct base64_encode_ctx *CTX)
 -- Function: void base64url_encode_init (struct base64_encode_ctx *CTX)
     Initializes a base64 context.  This is necessary before starting an
     encoding session.  ‘base64_encode_init’ selects the standard base64
     alphabet, while ‘base64url_encode_init’ selects the URL safe
     alphabet.

 -- Function: size_t base64_encode_single (struct base64_encode_ctx
          *CTX, uint8_t *DST, uint8_t SRC)
     Encodes a single byte.  Returns amount of output (always 1 or 2).

 -- Macro: BASE64_ENCODE_LENGTH (LENGTH)
     The maximum number of output bytes when passing LENGTH input bytes
     to ‘base64_encode_update’.

 -- Function: size_t base64_encode_update (struct base64_encode_ctx
          *CTX, uint8_t *DST, size_t LENGTH, const uint8_t *SRC)
     After CTX is initialized, this function may be called to encode
     LENGTH bytes from SRC.  The result will be placed in DST, and the
     return value will be the number of bytes generated.  Note that DST
     must be at least of size BASE64_ENCODE_LENGTH(LENGTH).

 -- Constant: BASE64_ENCODE_FINAL_LENGTH
     The maximum amount of output from ‘base64_encode_final’.

 -- Function: size_t base64_encode_final (struct base64_encode_ctx *CTX,
          uint8_t *DST)
     After calling base64_encode_update one or more times, this function
     should be called to generate the final output bytes, including any
     needed paddding.  The return value is the number of output bytes
     generated.

 -- Context struct: struct base64_decode_ctx

 -- Function: void base64_decode_init (struct base64_decode_ctx *CTX)
 -- Function: void base64url_decode_init (struct base64_decode_ctx *CTX)
     Initializes a base64 decoding context.  This is necessary before
     starting a decoding session.  ‘base64_decode_init’ selects the
     standard base64 alphabet, while ‘base64url_decode_init’ selects the
     URL safe alphabet.

 -- Function: int base64_decode_single (struct base64_decode_ctx *CTX,
          uint8_t *DST, uint8_t SRC)
     Decodes a single byte (SRC) and stores the result in DST.  Returns
     amount of output (0 or 1), or -1 on errors.

 -- Macro: BASE64_DECODE_LENGTH (LENGTH)
     The maximum number of output bytes when passing LENGTH input bytes
     to ‘base64_decode_update’.

 -- Function: void base64_decode_update (struct base64_decode_ctx *CTX,
          size_t *DST_LENGTH, uint8_t *DST, size_t SRC_LENGTH, const
          uint8_t *SRC)
     After CTX is initialized, this function may be called to decode
     SRC_LENGTH bytes from SRC.  The buffer pointed to by DST must be of
     size *DST_LENGTH, and the amount of data actually generated is
     returned in *DST_LENGTH.  Fails if DST_LENGTH is too small; using a
     buffer of size BASE64_DECODE_LENGTH(SRC_LENGTH) is always
     sufficient.  Returns 1 on success and 0 on error.

 -- Function: int base64_decode_final (struct base64_decode_ctx *CTX)
     Check that final padding is correct.  Returns 1 on success, and 0
     on error.

   Similarly to the base64 functions, the following functions perform
base16 encoding, and are defined in ‘<nettle/base16.h>’.  Note that
there is no encoding context necessary for doing base16 encoding.

 -- Function: void base16_encode_single (uint8_t *DST, uint8_t SRC)
     Encodes a single byte.  Always stores two digits in DST[0] and
     DST[1].

 -- Macro: BASE16_ENCODE_LENGTH (LENGTH)
     The number of output bytes when passing LENGTH input bytes to
     ‘base16_encode_update’.

 -- Function: void base16_encode_update (uint8_t *DST, size_t LENGTH,
          const uint8_t *SRC)
     Always stores BASE16_ENCODE_LENGTH(LENGTH) digits in DST.

 -- Context struct: struct base16_decode_ctx

 -- Function: void base16_decode_init (struct base16_decode_ctx *CTX)
     Initializes a base16 decoding context.  This is necessary before
     starting a decoding session.

 -- Function: int base16_decode_single (struct base16_decode_ctx *CTX,
          uint8_t *DST, uint8_t SRC)
     Decodes a single byte from SRC into DST.  Returns amount of output
     (0 or 1), or -1 on errors.

 -- Macro: BASE16_DECODE_LENGTH (LENGTH)
     The maximum number of output bytes when passing LENGTH input bytes
     to ‘base16_decode_update’.

 -- Function: int base16_decode_update (struct base16_decode_ctx *CTX,
          size_t *DST_LENGTH, uint8_t *DST, size_t SRC_LENGTH, const
          uint8_t *SRC)
     After CTX is initialized, this function may be called to decode
     SRC_LENGTH bytes from SRC.  The buffer pointed to by DST must be of
     size *DST_LENGTH, and the amount of data actually generated is
     returned in *DST_LENGTH.  Fails if DST_LENGTH is too small; using a
     buffer of size BASE16_DECODE_LENGTH(SRC_LENGTH) is always
     sufficient.  Returns 1 on success and 0 on error.

 -- Function: int base16_decode_final (struct base16_decode_ctx *CTX)
     Checks that the end of data is correct (i.e., an even number of
     hexadecimal digits have been seen).  Returns 1 on success, and 0 on
     error.


File: nettle.info,  Node: Miscellaneous functions,  Prev: ASCII encoding,  Up: Reference

4.10 Miscellaneous functions
============================

 -- Function: void * memxor (void *DST, const void *SRC, size_t N)
     XORs the source area on top of the destination area.  The interface
     doesn't follow the Nettle conventions, because it is intended to be
     similar to the ANSI-C ‘memcpy’ function.

 -- Function: void * memxor3 (void *DST, const void *A, const void *B,
          size_t N)
     Like ‘memxor’, but takes two source areas and separate destination
     area.

 -- Function: int memeql_sec (const void *A, const void *B, size_t N)
     Side-channel silent comparison of the N bytes at A and B.  I.e.,
     instructions executed and memory accesses are identical no matter
     where the areas differ, *note Side-channel silence::.  Return
     non-zero if the areas are equal, and zero if they differ.

   These functions are declared in ‘<nettle/memops.h>’.  For
compatibility with earlier versions of Nettle, ‘memxor’ and ‘memxor3’
are also declared in ‘<nettle/memxor.h>’.


File: nettle.info,  Node: Nettle soup,  Next: Installation,  Prev: Reference,  Up: Top

5 Traditional Nettle Soup
*************************

For the serious nettle hacker, here is a recipe for nettle soup.  4
servings.

     1 liter fresh nettles (urtica dioica)
     2 tablespoons butter
     3 tablespoons flour
     1 liter stock (meat or vegetable)
     1/2 teaspoon salt
     a tad white pepper
     some cream or milk

   Gather 1 liter fresh nettles.  Use gloves!  Small, tender shoots are
preferable but the tops of larger nettles can also be used.

   Rinse the nettles very well.  Boil them for 10 minutes in lightly
salted water.  Strain the nettles and save the water.  Hack the nettles.
Melt the butter and mix in the flour.  Dilute with stock and the
nettle-water you saved earlier.  Add the hacked nettles.  If you wish
you can add some milk or cream at this stage.  Bring to a boil and let
boil for a few minutes.  Season with salt and pepper.

   Serve with boiled egg-halves.


File: nettle.info,  Node: Installation,  Next: Index,  Prev: Nettle soup,  Up: Top

6 Installation
**************

Nettle uses ‘autoconf’, and the generated Makefile requires GNU make.
To build Nettle, unpack the source and run

     ./configure
     make
     make check
     make install

to install it under the default prefix, ‘/usr/local’.  By default, both
static and shared libraries are built and installed.

   To get a list of configure options, use ‘./configure --help’.  Some
of the more interesting are:

‘--prefix’
     Change install location.

‘--disable-fat’
     Disable run-time detection of available processor features.
     Additional configure options can be used to select which features
     to require.

‘--enable-mini-gmp’
     Use the smaller and slower "mini-gmp" implementation of the bignum
     functions needed for public-key cryptography, instead of the real
     GNU GMP library.  This option is intended primarily for smaller
     embedded systems.  Note that builds using mini-gmp are *not* binary
     compatible with regular builds of Nettle, and more likely to leak
     side-channel information.

‘--disable-shared’
     Omit building the shared libraries.


File: nettle.info,  Node: Index,  Prev: Installation,  Up: Top

Function and Concept Index
**************************

[index]
* Menu:

* 3DES:                                  DES3.                (line   6)
* ABI compatibility:                     Compatibility.       (line   6)
* AEAD:                                  Authenticated encryption.
                                                              (line   6)
* AES:                                   AES.                 (line   6)
* aes128_decrypt:                        AES.                 (line  71)
* aes128_encrypt:                        AES.                 (line  60)
* aes128_invert_key:                     AES.                 (line  45)
* aes128_set_decrypt_key:                AES.                 (line  33)
* aes128_set_encrypt_key:                AES.                 (line  31)
* aes192_decrypt:                        AES.                 (line  73)
* aes192_encrypt:                        AES.                 (line  62)
* aes192_invert_key:                     AES.                 (line  47)
* aes192_set_decrypt_key:                AES.                 (line  37)
* aes192_set_encrypt_key:                AES.                 (line  35)
* aes256_decrypt:                        AES.                 (line  75)
* aes256_encrypt:                        AES.                 (line  64)
* aes256_invert_key:                     AES.                 (line  49)
* aes256_set_decrypt_key:                AES.                 (line  41)
* aes256_set_encrypt_key:                AES.                 (line  39)
* API compatibility:                     Compatibility.       (line   6)
* Arcfour:                               Arcfour.             (line   6)
* arcfour_crypt:                         Arcfour.             (line  59)
* arcfour_set_key:                       Arcfour.             (line  54)
* Arctwo:                                Arctwo.              (line   6)
* arctwo_decrypt:                        Arctwo.              (line  60)
* arctwo_encrypt:                        Arctwo.              (line  53)
* arctwo_set_key:                        Arctwo.              (line  37)
* arctwo_set_key_ekb:                    Arctwo.              (line  35)
* arctwo_set_key_gutmann:                Arctwo.              (line  39)
* Authenticated encryption:              Authenticated encryption.
                                                              (line   6)
* balloon:                               Key derivation functions.
                                                              (line 181)
* Balloon password-hashing algorithm:    Key derivation functions.
                                                              (line 150)
* balloon_itch:                          Key derivation functions.
                                                              (line 194)
* balloon_sha1:                          Key derivation functions.
                                                              (line 208)
* balloon_sha256:                        Key derivation functions.
                                                              (line 216)
* balloon_sha384:                        Key derivation functions.
                                                              (line 224)
* balloon_sha512:                        Key derivation functions.
                                                              (line 232)
* base16_decode_final:                   ASCII encoding.      (line 145)
* base16_decode_init:                    ASCII encoding.      (line 122)
* BASE16_DECODE_LENGTH:                  ASCII encoding.      (line 131)
* base16_decode_single:                  ASCII encoding.      (line 126)
* base16_decode_update:                  ASCII encoding.      (line 135)
* BASE16_ENCODE_LENGTH:                  ASCII encoding.      (line 112)
* base16_encode_single:                  ASCII encoding.      (line 108)
* base16_encode_update:                  ASCII encoding.      (line 116)
* base64_decode_final:                   ASCII encoding.      (line 100)
* base64_decode_init:                    ASCII encoding.      (line  74)
* BASE64_DECODE_LENGTH:                  ASCII encoding.      (line  86)
* base64_decode_single:                  ASCII encoding.      (line  81)
* base64_decode_update:                  ASCII encoding.      (line  90)
* base64_encode_final:                   ASCII encoding.      (line  65)
* base64_encode_init:                    ASCII encoding.      (line  40)
* BASE64_ENCODE_LENGTH:                  ASCII encoding.      (line  51)
* base64_encode_single:                  ASCII encoding.      (line  47)
* base64_encode_update:                  ASCII encoding.      (line  55)
* base64url_decode_init:                 ASCII encoding.      (line  75)
* base64url_encode_init:                 ASCII encoding.      (line  41)
* Binary compatibility:                  Compatibility.       (line   6)
* Block Cipher:                          Cipher functions.    (line  12)
* Blowfish:                              Blowfish.            (line   6)
* blowfish_bcrypt_hash:                  Blowfish.            (line  45)
* blowfish_bcrypt_verify:                Blowfish.            (line  85)
* blowfish_decrypt:                      Blowfish.            (line  41)
* blowfish_encrypt:                      Blowfish.            (line  34)
* blowfish_set_key:                      Blowfish.            (line  24)
* Camellia:                              Camellia.            (line   6)
* camellia_crypt:                        Camellia.            (line  86)
* camellia_invert_key:                   Camellia.            (line  72)
* camellia_set_decrypt_key:              Camellia.            (line  62)
* camellia_set_encrypt_key:              Camellia.            (line  60)
* camellia128_crypt:                     Camellia.            (line  80)
* camellia128_invert_key:                Camellia.            (line  66)
* camellia128_set_decrypt_key:           Camellia.            (line  50)
* camellia128_set_encrypt_key:           Camellia.            (line  48)
* camellia192_crypt:                     Camellia.            (line  82)
* camellia192_invert_key:                Camellia.            (line  68)
* camellia192_set_decrypt_key:           Camellia.            (line  54)
* camellia192_set_encrypt_key:           Camellia.            (line  52)
* camellia256_crypt:                     Camellia.            (line  84)
* camellia256_invert_key:                Camellia.            (line  70)
* camellia256_set_decrypt_key:           Camellia.            (line  58)
* camellia256_set_encrypt_key:           Camellia.            (line  56)
* CAST:                                  CAST128.             (line   6)
* cast128_decrypt:                       CAST128.             (line  41)
* cast128_encrypt:                       CAST128.             (line  34)
* cast128_set_key:                       CAST128.             (line  29)
* cast5_set_key:                         CAST128.             (line  45)
* CBC Mode:                              CBC.                 (line   6)
* cbc_aes128_encrypt:                    CBC.                 (line 103)
* cbc_aes192_encrypt:                    CBC.                 (line 105)
* cbc_aes256_encrypt:                    CBC.                 (line 107)
* CBC_CTX:                               CBC.                 (line  55)
* cbc_decrypt:                           CBC.                 (line  35)
* CBC_DECRYPT:                           CBC.                 (line  76)
* cbc_encrypt:                           CBC.                 (line  32)
* CBC_ENCRYPT:                           CBC.                 (line  75)
* CBC_SET_IV:                            CBC.                 (line  70)
* CCM Mode:                              CCM.                 (line   6)
* ccm_aes128_decrypt:                    CCM.                 (line 216)
* ccm_aes128_decrypt_message:            CCM.                 (line 248)
* ccm_aes128_digest:                     CCM.                 (line 225)
* ccm_aes128_encrypt:                    CCM.                 (line 210)
* ccm_aes128_encrypt_message:            CCM.                 (line 236)
* ccm_aes128_set_key:                    CCM.                 (line 179)
* ccm_aes128_set_nonce:                  CCM.                 (line 189)
* ccm_aes128_update:                     CCM.                 (line 201)
* ccm_aes192_decrypt:                    CCM.                 (line 218)
* ccm_aes192_decrypt_message:            CCM.                 (line 252)
* ccm_aes192_digest:                     CCM.                 (line 227)
* ccm_aes192_encrypt:                    CCM.                 (line 212)
* ccm_aes192_encrypt_message:            CCM.                 (line 240)
* ccm_aes192_set_key:                    CCM.                 (line 181)
* ccm_aes192_set_nonce:                  CCM.                 (line 192)
* ccm_aes192_update:                     CCM.                 (line 203)
* ccm_aes256_decrypt:                    CCM.                 (line 220)
* ccm_aes256_decrypt_message:            CCM.                 (line 256)
* ccm_aes256_digest:                     CCM.                 (line 229)
* ccm_aes256_encrypt:                    CCM.                 (line 214)
* ccm_aes256_encrypt_message:            CCM.                 (line 244)
* ccm_aes256_set_key:                    CCM.                 (line 183)
* ccm_aes256_set_nonce:                  CCM.                 (line 195)
* ccm_aes256_update:                     CCM.                 (line 205)
* ccm_decrypt:                           CCM.                 (line 100)
* ccm_decrypt_message:                   CCM.                 (line 147)
* ccm_digest:                            CCM.                 (line 108)
* ccm_encrypt:                           CCM.                 (line  97)
* ccm_encrypt_message:                   CCM.                 (line 139)
* CCM_MAX_MSG_SIZE:                      CCM.                 (line  81)
* ccm_set_nonce:                         CCM.                 (line  85)
* ccm_update:                            CCM.                 (line  91)
* CFB Modes:                             CFB and CFB8.        (line   6)
* CFB_CTX:                               CFB and CFB8.        (line  86)
* cfb_decrypt:                           CFB and CFB8.        (line  55)
* CFB_DECRYPT:                           CFB and CFB8.        (line 105)
* cfb_encrypt:                           CFB and CFB8.        (line  52)
* CFB_ENCRYPT:                           CFB and CFB8.        (line  98)
* CFB_SET_IV(CTX,:                       CFB and CFB8.        (line  93)
* CFB8 Mode:                             CFB and CFB8.        (line   6)
* CFB8_CTX:                              CFB and CFB8.        (line 112)
* cfb8_decrypt:                          CFB and CFB8.        (line  73)
* CFB8_DECRYPT:                          CFB and CFB8.        (line 131)
* cfb8_encrypt:                          CFB and CFB8.        (line  70)
* CFB8_ENCRYPT:                          CFB and CFB8.        (line 124)
* CFB8_SET_IV:                           CFB and CFB8.        (line 119)
* ChaCha:                                ChaCha.              (line   6)
* chacha_crypt:                          ChaCha.              (line  44)
* chacha_crypt32:                        ChaCha.              (line  76)
* chacha_poly1305_decrypt:               ChaCha-Poly1305.     (line  63)
* chacha_poly1305_digest:                ChaCha-Poly1305.     (line  69)
* chacha_poly1305_encrypt:               ChaCha-Poly1305.     (line  61)
* chacha_poly1305_set_key:               ChaCha-Poly1305.     (line  48)
* chacha_poly1305_set_nonce:             ChaCha-Poly1305.     (line  53)
* chacha_poly1305_update:                ChaCha-Poly1305.     (line  57)
* chacha_set_counter:                    ChaCha.              (line  36)
* chacha_set_counter32:                  ChaCha.              (line  70)
* chacha_set_key:                        ChaCha.              (line  24)
* chacha_set_nonce:                      ChaCha.              (line  30)
* chacha_set_nonce96:                    ChaCha.              (line  65)
* Cipher:                                Cipher functions.    (line   6)
* Cipher Block Chaining:                 CBC.                 (line   6)
* Cipher Feedback 8-bit Mode:            CFB and CFB8.        (line   6)
* Cipher Feedback Mode:                  CFB and CFB8.        (line   6)
* CMAC:                                  CMAC.                (line   6)
* cmac_aes128_digest:                    CMAC.                (line  33)
* cmac_aes128_set_key:                   CMAC.                (line  25)
* cmac_aes128_update:                    CMAC.                (line  29)
* cmac_aes256_digest:                    CMAC.                (line  47)
* cmac_aes256_set_key:                   CMAC.                (line  39)
* cmac_aes256_update:                    CMAC.                (line  43)
* cmac_des3_digest:                      CMAC.                (line  66)
* cmac_des3_set_key:                     CMAC.                (line  58)
* cmac_des3_update:                      CMAC.                (line  62)
* CMAC-128:                              CMAC.                (line   6)
* CMAC-64:                               CMAC.                (line   6)
* Collision-resistant:                   Hash functions.      (line  18)
* Conditional entropy:                   Randomness.          (line  58)
* Counter Mode:                          CTR.                 (line   6)
* Counter with CBC-MAC Mode:             CCM.                 (line   6)
* CTR Mode:                              CTR.                 (line   6)
* ctr_crypt:                             CTR.                 (line  33)
* CTR_CRYPT:                             CTR.                 (line  60)
* CTR_CTX:                               CTR.                 (line  48)
* CTR_SET_COUNTER:                       CTR.                 (line  55)
* Curve 25519:                           Curve 25519 and Curve 448.
                                                              (line   6)
* Curve 448:                             Curve 25519 and Curve 448.
                                                              (line   6)
* curve25519_mul:                        Curve 25519 and Curve 448.
                                                              (line  60)
* curve25519_mul_g:                      Curve 25519 and Curve 448.
                                                              (line  51)
* curve448_mul:                          Curve 25519 and Curve 448.
                                                              (line  91)
* curve448_mul_g:                        Curve 25519 and Curve 448.
                                                              (line  82)
* DES:                                   DES.                 (line   6)
* des_check_parity:                      DES.                 (line  47)
* des_decrypt:                           DES.                 (line  43)
* des_encrypt:                           DES.                 (line  36)
* des_fix_parity:                        DES.                 (line  51)
* des_set_key:                           DES.                 (line  29)
* DES3:                                  DES3.                (line   6)
* des3_decrypt:                          DES3.                (line  65)
* des3_encrypt:                          DES3.                (line  58)
* des3_set_key:                          DES3.                (line  47)
* Digital signatures:                    Public-key algorithms.
                                                              (line   6)
* drbg_ctr_aes256_init:                  Randomness.          (line 343)
* drbg_ctr_aes256_random:                Randomness.          (line 348)
* drbg_ctr_aes256_update:                Randomness.          (line 353)
* dsa_generate_keypair:                  DSA.                 (line 199)
* dsa_generate_params:                   DSA.                 (line 131)
* dsa_params:                            DSA.                 (line 122)
* dsa_params_clear:                      DSA.                 (line 128)
* dsa_params_init:                       DSA.                 (line 125)
* dsa_sign:                              DSA.                 (line 178)
* dsa_signature:                         DSA.                 (line 165)
* dsa_signature_clear:                   DSA.                 (line 169)
* dsa_signature_init:                    DSA.                 (line 168)
* dsa_verify:                            DSA.                 (line 190)
* eax_aes128_decrypt:                    EAX.                 (line 134)
* eax_aes128_digest:                     EAX.                 (line 140)
* eax_aes128_encrypt:                    EAX.                 (line 132)
* eax_aes128_set_key:                    EAX.                 (line 118)
* eax_aes128_set_nonce:                  EAX.                 (line 122)
* eax_aes128_update:                     EAX.                 (line 126)
* EAX_CTX:                               EAX.                 (line  79)
* eax_decrypt:                           EAX.                 (line  60)
* EAX_DECRYPT:                           EAX.                 (line 103)
* eax_digest:                            EAX.                 (line  68)
* EAX_DIGEST:                            EAX.                 (line 106)
* eax_encrypt:                           EAX.                 (line  57)
* EAX_ENCRYPT:                           EAX.                 (line 102)
* eax_set_key:                           EAX.                 (line  36)
* EAX_SET_KEY:                           EAX.                 (line  92)
* eax_set_nonce:                         EAX.                 (line  42)
* EAX_SET_NONCE:                         EAX.                 (line  96)
* eax_update:                            EAX.                 (line  48)
* EAX_UPDATE:                            EAX.                 (line  99)
* ecc_point_clear:                       ECDSA.               (line  36)
* ecc_point_get:                         ECDSA.               (line  47)
* ecc_point_init:                        ECDSA.               (line  30)
* ecc_point_set:                         ECDSA.               (line  39)
* ecc_scalar_clear:                      ECDSA.               (line  62)
* ecc_scalar_get:                        ECDSA.               (line  69)
* ecc_scalar_init:                       ECDSA.               (line  57)
* ecc_scalar_set:                        ECDSA.               (line  65)
* ecdsa_generate_keypair:                ECDSA.               (line  93)
* ecdsa_sign:                            ECDSA.               (line  75)
* ecdsa_verify:                          ECDSA.               (line  84)
* ed25519_sha512_public_key:             Curve 25519 and Curve 448.
                                                              (line 131)
* ed25519_sha512_sign:                   Curve 25519 and Curve 448.
                                                              (line 136)
* ed25519_sha512_verify:                 Curve 25519 and Curve 448.
                                                              (line 141)
* ed448_shake256_public_key:             Curve 25519 and Curve 448.
                                                              (line 155)
* ed448_shake256_sign:                   Curve 25519 and Curve 448.
                                                              (line 160)
* ed448_shake256_verify:                 Curve 25519 and Curve 448.
                                                              (line 165)
* eddsa:                                 Curve 25519 and Curve 448.
                                                              (line 104)
* Entropy:                               Randomness.          (line  58)
* Galois Counter Mode:                   GCM.                 (line   6)
* GCM:                                   GCM.                 (line   6)
* gcm_aes128_decrypt:                    GCM.                 (line 172)
* gcm_aes128_digest:                     GCM.                 (line 182)
* gcm_aes128_encrypt:                    GCM.                 (line 166)
* gcm_aes128_set_iv:                     GCM.                 (line 147)
* gcm_aes128_set_key:                    GCM.                 (line 139)
* gcm_aes128_update:                     GCM.                 (line 155)
* gcm_aes192_decrypt:                    GCM.                 (line 174)
* gcm_aes192_digest:                     GCM.                 (line 184)
* gcm_aes192_encrypt:                    GCM.                 (line 168)
* gcm_aes192_set_iv:                     GCM.                 (line 149)
* gcm_aes192_set_key:                    GCM.                 (line 141)
* gcm_aes192_update:                     GCM.                 (line 157)
* gcm_aes256_decrypt:                    GCM.                 (line 176)
* gcm_aes256_digest:                     GCM.                 (line 186)
* gcm_aes256_encrypt:                    GCM.                 (line 170)
* gcm_aes256_set_iv:                     GCM.                 (line 151)
* gcm_aes256_set_key:                    GCM.                 (line 143)
* gcm_aes256_update:                     GCM.                 (line 159)
* gcm_camellia_digest:                   GCM.                 (line 240)
* gcm_camellia128_decrypt:               GCM.                 (line 226)
* gcm_camellia128_digest:                GCM.                 (line 234)
* gcm_camellia128_encrypt:               GCM.                 (line 222)
* gcm_camellia128_set_iv:                GCM.                 (line 207)
* gcm_camellia128_set_key:               GCM.                 (line 201)
* gcm_camellia128_update:                GCM.                 (line 213)
* gcm_camellia192_digest:                GCM.                 (line 236)
* gcm_camellia256_decrypt:               GCM.                 (line 228)
* gcm_camellia256_digest:                GCM.                 (line 238)
* gcm_camellia256_encrypt:               GCM.                 (line 224)
* gcm_camellia256_set_iv:                GCM.                 (line 209)
* gcm_camellia256_set_key:               GCM.                 (line 203)
* gcm_camellia256_update:                GCM.                 (line 215)
* GCM_CTX:                               GCM.                 (line  93)
* gcm_decrypt:                           GCM.                 (line  65)
* GCM_DECRYPT:                           GCM.                 (line 122)
* gcm_digest:                            GCM.                 (line  73)
* GCM_DIGEST:                            GCM.                 (line 123)
* gcm_encrypt:                           GCM.                 (line  62)
* GCM_ENCRYPT:                           GCM.                 (line 121)
* gcm_set_iv:                            GCM.                 (line  50)
* GCM_SET_IV:                            GCM.                 (line 113)
* gcm_set_key:                           GCM.                 (line  44)
* GCM_SET_KEY:                           GCM.                 (line 108)
* gcm_sm4_decrypt:                       GCM.                 (line 271)
* gcm_sm4_digest:                        GCM.                 (line 277)
* gcm_sm4_encrypt:                       GCM.                 (line 269)
* gcm_sm4_set_iv:                        GCM.                 (line 258)
* gcm_sm4_set_key:                       GCM.                 (line 254)
* gcm_sm4_update:                        GCM.                 (line 262)
* gcm_update:                            GCM.                 (line  55)
* GCM_UPDATE:                            GCM.                 (line 117)
* GOST DSA:                              GOSTDSA.             (line   6)
* GOST hash:                             Legacy hash functions.
                                                              (line 192)
* gostdsa_sign:                          GOSTDSA.             (line  30)
* gostdsa_verify:                        GOSTDSA.             (line  39)
* gostdsa_vko:                           GOSTDSA.             (line  68)
* gosthash94_digest:                     Legacy hash functions.
                                                              (line 217)
* gosthash94_init:                       Legacy hash functions.
                                                              (line 210)
* gosthash94_update:                     Legacy hash functions.
                                                              (line 213)
* gosthash94cp_digest:                   Legacy hash functions.
                                                              (line 240)
* gosthash94cp_init:                     Legacy hash functions.
                                                              (line 233)
* gosthash94cp_update:                   Legacy hash functions.
                                                              (line 236)
* Hash function:                         Hash functions.      (line   6)
* HKDF:                                  Key derivation functions.
                                                              (line  16)
* hkdf_expand:                           Key derivation functions.
                                                              (line  42)
* hkdf_extract:                          Key derivation functions.
                                                              (line  29)
* HMAC:                                  HMAC.                (line   6)
* hmac_md5_digest:                       HMAC.                (line  37)
* hmac_md5_set_key:                      HMAC.                (line  29)
* hmac_md5_update:                       HMAC.                (line  33)
* hmac_ripemd160_digest:                 HMAC.                (line  57)
* hmac_ripemd160_set_key:                HMAC.                (line  49)
* hmac_ripemd160_update:                 HMAC.                (line  53)
* hmac_sha1_digest:                      HMAC.                (line  77)
* hmac_sha1_set_key:                     HMAC.                (line  69)
* hmac_sha1_update:                      HMAC.                (line  73)
* hmac_sha256_digest:                    HMAC.                (line  97)
* hmac_sha256_set_key:                   HMAC.                (line  89)
* hmac_sha256_update:                    HMAC.                (line  93)
* hmac_sha512_digest:                    HMAC.                (line 117)
* hmac_sha512_set_key:                   HMAC.                (line 109)
* hmac_sha512_update:                    HMAC.                (line 113)
* hmac_sm3_digest:                       HMAC.                (line 137)
* hmac_sm3_set_key:                      HMAC.                (line 129)
* hmac_sm3_update:                       HMAC.                (line 133)
* KDF:                                   Key derivation functions.
                                                              (line  58)
* Key Derivation Function:               Key derivation functions.
                                                              (line   6)
* Keyed Hash Function:                   Keyed hash functions.
                                                              (line   6)
* MAC:                                   Keyed hash functions.
                                                              (line   6)
* md2_digest:                            Legacy hash functions.
                                                              (line  82)
* md2_init:                              Legacy hash functions.
                                                              (line  75)
* md2_update:                            Legacy hash functions.
                                                              (line  78)
* md4_digest:                            Legacy hash functions.
                                                              (line 113)
* md4_init:                              Legacy hash functions.
                                                              (line 106)
* md4_update:                            Legacy hash functions.
                                                              (line 109)
* md5_compress:                          Legacy hash functions.
                                                              (line  46)
* md5_digest:                            Legacy hash functions.
                                                              (line  39)
* md5_init:                              Legacy hash functions.
                                                              (line  32)
* md5_update:                            Legacy hash functions.
                                                              (line  35)
* memeql_sec:                            Miscellaneous functions.
                                                              (line  16)
* memxor:                                Miscellaneous functions.
                                                              (line   6)
* memxor3:                               Miscellaneous functions.
                                                              (line  11)
* Message Authentication Code:           Keyed hash functions.
                                                              (line   6)
* nettle_aead:                           nettle_aead abstraction.
                                                              (line   6)
* nettle_aeads:                          nettle_aead abstraction.
                                                              (line  33)
* nettle_cipher:                         nettle_cipher abstraction.
                                                              (line   6)
* nettle_ciphers:                        nettle_cipher abstraction.
                                                              (line  53)
* nettle_get_aeads:                      nettle_aead abstraction.
                                                              (line  28)
* nettle_get_ciphers:                    nettle_cipher abstraction.
                                                              (line  48)
* nettle_get_gost_gc256b:                GOSTDSA.             (line  51)
* nettle_get_gost_gc512a:                GOSTDSA.             (line  57)
* nettle_get_hashes:                     nettle_hash abstraction.
                                                              (line  35)
* nettle_hash:                           nettle_hash abstraction.
                                                              (line   6)
* nettle_hashes:                         nettle_hash abstraction.
                                                              (line  40)
* OCB:                                   OCB.                 (line   6)
* OCB mode:                              OCB.                 (line   6)
* ocb_aes128_decrypt:                    OCB.                 (line 151)
* ocb_aes128_decrypt_message:            OCB.                 (line 176)
* ocb_aes128_digest:                     OCB.                 (line 159)
* ocb_aes128_encrypt:                    OCB.                 (line 145)
* ocb_aes128_encrypt_message:            OCB.                 (line 167)
* ocb_aes128_set_decrypt_key:            OCB.                 (line 121)
* ocb_aes128_set_encrypt_key:            OCB.                 (line 117)
* ocb_aes128_set_nonce:                  OCB.                 (line 129)
* ocb_aes128_update:                     OCB.                 (line 138)
* ocb_decrypt:                           OCB.                 (line  64)
* ocb_decrypt_message:                   OCB.                 (line  94)
* ocb_digest:                            OCB.                 (line  75)
* ocb_encrypt:                           OCB.                 (line  56)
* ocb_encrypt_message:                   OCB.                 (line  84)
* ocb_set_key:                           OCB.                 (line  34)
* ocb_set_nonce:                         OCB.                 (line  40)
* ocb_update:                            OCB.                 (line  49)
* Offset Code Book:                      OCB.                 (line   6)
* One-way:                               Hash functions.      (line  14)
* Password Based Key Derivation Function: Key derivation functions.
                                                              (line  58)
* PBKDF:                                 Key derivation functions.
                                                              (line  58)
* pbkdf2:                                Key derivation functions.
                                                              (line  68)
* PBKDF2:                                Key derivation functions.
                                                              (line  84)
* pbkdf2_hmac_sha1:                      Key derivation functions.
                                                              (line 103)
* pbkdf2_hmac_sha256:                    Key derivation functions.
                                                              (line 114)
* pbkdf2_hmac_sha384:                    Key derivation functions.
                                                              (line 126)
* pbkdf2_hmac_sha512:                    Key derivation functions.
                                                              (line 138)
* PKCS #5:                               Key derivation functions.
                                                              (line  58)
* poly1305_aes_digest:                   Poly1305.            (line  56)
* poly1305_aes_set_key:                  Poly1305.            (line  43)
* poly1305_aes_set_nonce:                Poly1305.            (line  47)
* poly1305_aes_update:                   Poly1305.            (line  52)
* post-quantum:                          SLH-DSA.             (line   6)
* Public-key cryptography:               Public-key algorithms.
                                                              (line   6)
* Randomness:                            Randomness.          (line   6)
* RC2:                                   Arctwo.              (line   6)
* RC4:                                   Arcfour.             (line   6)
* ripemd160_digest:                      Legacy hash functions.
                                                              (line 144)
* ripemd160_init:                        Legacy hash functions.
                                                              (line 137)
* ripemd160_update:                      Legacy hash functions.
                                                              (line 140)
* rsa_compute_root:                      RSA.                 (line 412)
* rsa_compute_root_tr:                   RSA.                 (line 406)
* rsa_decrypt:                           RSA.                 (line 335)
* rsa_decrypt_tr:                        RSA.                 (line 344)
* rsa_encrypt:                           RSA.                 (line 328)
* rsa_generate_keypair:                  RSA.                 (line 418)
* rsa_md5_sign:                          RSA.                 (line 203)
* rsa_md5_sign_digest:                   RSA.                 (line 218)
* rsa_md5_sign_digest_tr:                RSA.                 (line 171)
* rsa_md5_sign_tr:                       RSA.                 (line 146)
* rsa_md5_verify:                        RSA.                 (line 244)
* rsa_md5_verify_digest:                 RSA.                 (line 256)
* rsa_oaep_sha256_decrypt:               RSA.                 (line 382)
* rsa_oaep_sha256_encrypt:               RSA.                 (line 359)
* rsa_oaep_sha384_decrypt:               RSA.                 (line 387)
* rsa_oaep_sha384_encrypt:               RSA.                 (line 363)
* rsa_oaep_sha512_decrypt:               RSA.                 (line 392)
* rsa_oaep_sha512_encrypt:               RSA.                 (line 367)
* rsa_pkcs1_sign:                        RSA.                 (line 234)
* rsa_pkcs1_sign_tr:                     RSA.                 (line 194)
* rsa_pkcs1_verify:                      RSA.                 (line 269)
* rsa_private_key:                       RSA.                 (line  86)
* rsa_private_key_clear:                 RSA.                 (line 104)
* rsa_private_key_init:                  RSA.                 (line  97)
* rsa_private_key_prepare:               RSA.                 (line 117)
* rsa_pss_sha256_sign_digest_tr:         RSA.                 (line 291)
* rsa_pss_sha256_verify_digest:          RSA.                 (line 313)
* rsa_pss_sha384_sign_digest_tr:         RSA.                 (line 295)
* rsa_pss_sha384_verify_digest:          RSA.                 (line 316)
* rsa_pss_sha512_sign_digest_tr:         RSA.                 (line 299)
* rsa_pss_sha512_verify_digest:          RSA.                 (line 319)
* rsa_public_key:                        RSA.                 (line  82)
* rsa_public_key_clear:                  RSA.                 (line 103)
* rsa_public_key_init:                   RSA.                 (line  96)
* rsa_public_key_prepare:                RSA.                 (line 116)
* rsa_sha1_sign:                         RSA.                 (line 205)
* rsa_sha1_sign_digest:                  RSA.                 (line 220)
* rsa_sha1_sign_digest_tr:               RSA.                 (line 175)
* rsa_sha1_sign_tr:                      RSA.                 (line 150)
* rsa_sha1_verify:                       RSA.                 (line 246)
* rsa_sha1_verify_digest:                RSA.                 (line 258)
* rsa_sha256_sign:                       RSA.                 (line 207)
* rsa_sha256_sign_digest:                RSA.                 (line 222)
* rsa_sha256_sign_digest_tr:             RSA.                 (line 179)
* rsa_sha256_sign_tr:                    RSA.                 (line 154)
* rsa_sha256_verify:                     RSA.                 (line 248)
* rsa_sha256_verify_digest:              RSA.                 (line 260)
* rsa_sha512_sign:                       RSA.                 (line 209)
* rsa_sha512_sign_digest:                RSA.                 (line 224)
* rsa_sha512_sign_digest_tr:             RSA.                 (line 183)
* rsa_sha512_sign_tr:                    RSA.                 (line 158)
* rsa_sha512_verify:                     RSA.                 (line 250)
* rsa_sha512_verify_digest:              RSA.                 (line 262)
* Salsa20:                               Salsa20.             (line   6)
* salsa20_128_set_key:                   Salsa20.             (line  49)
* salsa20_256_set_key:                   Salsa20.             (line  51)
* salsa20_crypt:                         Salsa20.             (line  69)
* salsa20_set_key:                       Salsa20.             (line  53)
* salsa20_set_nonce:                     Salsa20.             (line  63)
* salsa20r12_crypt:                      Salsa20.             (line  84)
* Serpent:                               Serpent.             (line   6)
* serpent_decrypt:                       Serpent.             (line  38)
* serpent_encrypt:                       Serpent.             (line  31)
* serpent_set_key:                       Serpent.             (line  26)
* sha1_compress:                         Legacy hash functions.
                                                              (line 182)
* sha1_digest:                           Legacy hash functions.
                                                              (line 175)
* sha1_init:                             Legacy hash functions.
                                                              (line 168)
* sha1_update:                           Legacy hash functions.
                                                              (line 171)
* sha224_digest:                         Recommended hash functions.
                                                              (line  71)
* sha224_init:                           Recommended hash functions.
                                                              (line  64)
* sha224_update:                         Recommended hash functions.
                                                              (line  67)
* sha256_compress:                       Recommended hash functions.
                                                              (line  40)
* sha256_digest:                         Recommended hash functions.
                                                              (line  32)
* sha256_init:                           Recommended hash functions.
                                                              (line  25)
* sha256_update:                         Recommended hash functions.
                                                              (line  28)
* SHA3:                                  Recommended hash functions.
                                                              (line 178)
* sha3_128_shake:                        Recommended hash functions.
                                                              (line 330)
* sha3_128_shake_output:                 Recommended hash functions.
                                                              (line 337)
* sha3_128_update:                       Recommended hash functions.
                                                              (line 326)
* sha3_224_digest:                       Recommended hash functions.
                                                              (line 230)
* sha3_224_update:                       Recommended hash functions.
                                                              (line 226)
* sha3_256_digest:                       Recommended hash functions.
                                                              (line 253)
* sha3_256_shake:                        Recommended hash functions.
                                                              (line 347)
* sha3_256_shake_output:                 Recommended hash functions.
                                                              (line 354)
* sha3_256_update:                       Recommended hash functions.
                                                              (line 249)
* sha3_384_digest:                       Recommended hash functions.
                                                              (line 276)
* sha3_384_update:                       Recommended hash functions.
                                                              (line 272)
* sha3_512_digest:                       Recommended hash functions.
                                                              (line 299)
* sha3_512_update:                       Recommended hash functions.
                                                              (line 295)
* sha3_init:                             Recommended hash functions.
                                                              (line 194)
* sha384_digest:                         Recommended hash functions.
                                                              (line 167)
* sha384_init:                           Recommended hash functions.
                                                              (line 151)
* sha384_update:                         Recommended hash functions.
                                                              (line 158)
* sha512_224_digest:                     Recommended hash functions.
                                                              (line 163)
* sha512_224_init:                       Recommended hash functions.
                                                              (line 149)
* sha512_224_update:                     Recommended hash functions.
                                                              (line 154)
* sha512_256_digest:                     Recommended hash functions.
                                                              (line 165)
* sha512_256_init:                       Recommended hash functions.
                                                              (line 150)
* sha512_256_update:                     Recommended hash functions.
                                                              (line 156)
* sha512_compress:                       Recommended hash functions.
                                                              (line 112)
* sha512_digest:                         Recommended hash functions.
                                                              (line 104)
* sha512_init:                           Recommended hash functions.
                                                              (line  97)
* sha512_update:                         Recommended hash functions.
                                                              (line 100)
* SHAKE:                                 Recommended hash functions.
                                                              (line 309)
* Side-channel attack:                   Side-channel silence.
                                                              (line   6)
* SIV mode:                              SIV-CMAC.            (line   6)
* siv_cmac_aes128_decrypt_message:       SIV-CMAC.            (line  83)
* siv_cmac_aes128_encrypt_message:       SIV-CMAC.            (line  70)
* siv_cmac_aes128_set_key:               SIV-CMAC.            (line  62)
* siv_cmac_aes256_decrypt_message:       SIV-CMAC.            (line  87)
* siv_cmac_aes256_encrypt_message:       SIV-CMAC.            (line  74)
* siv_cmac_aes256_set_key:               SIV-CMAC.            (line  64)
* siv_gcm_aes128_decrypt_message:        SIV-GCM.             (line  87)
* siv_gcm_aes128_encrypt_message:        SIV-GCM.             (line  74)
* siv_gcm_aes256_decrypt_message:        SIV-GCM.             (line  91)
* siv_gcm_aes256_encrypt_message:        SIV-GCM.             (line  78)
* siv_gcm_decrypt_message:               SIV-GCM.             (line  41)
* siv_gcm_encrypt_message:               SIV-GCM.             (line  32)
* SIV-CMAC mode:                         SIV-CMAC.            (line   6)
* slh_dsa_sha2_128f_generate_keypair:    SLH-DSA.             (line  80)
* slh_dsa_sha2_128f_root:                SLH-DSA.             (line  94)
* slh_dsa_sha2_128f_sign:                SLH-DSA.             (line 111)
* slh_dsa_sha2_128f_verify:              SLH-DSA.             (line 124)
* slh_dsa_sha2_128s_generate_keypair:    SLH-DSA.             (line  78)
* slh_dsa_sha2_128s_root:                SLH-DSA.             (line  92)
* slh_dsa_sha2_128s_sign:                SLH-DSA.             (line 108)
* slh_dsa_sha2_128s_verify:              SLH-DSA.             (line 122)
* slh_dsa_shake_128f_generate_keypair:   SLH-DSA.             (line  76)
* slh_dsa_shake_128f_root:               SLH-DSA.             (line  90)
* slh_dsa_shake_128f_sign:               SLH-DSA.             (line 105)
* slh_dsa_shake_128f_verify:             SLH-DSA.             (line 120)
* slh_dsa_shake_128s_generate_keypair:   SLH-DSA.             (line  74)
* slh_dsa_shake_128s_root:               SLH-DSA.             (line  88)
* slh_dsa_shake_128s_sign:               SLH-DSA.             (line 102)
* slh_dsa_shake_128s_verify:             SLH-DSA.             (line 118)
* SLH-DSA:                               SLH-DSA.             (line   6)
* sm3_digest:                            Miscellaneous hash functions.
                                                              (line 103)
* sm3_init:                              Miscellaneous hash functions.
                                                              (line  96)
* sm3_update:                            Miscellaneous hash functions.
                                                              (line  99)
* SM4:                                   SM4.                 (line   6)
* sm4_crypt:                             SM4.                 (line  27)
* sm4_set_decrypt_key:                   SM4.                 (line  23)
* sm4_set_encrypt_key:                   SM4.                 (line  19)
* SPHINCS+:                              SLH-DSA.             (line   6)
* Stream Cipher:                         Cipher functions.    (line  12)
* streebog256_digest:                    Miscellaneous hash functions.
                                                              (line  60)
* streebog256_init:                      Miscellaneous hash functions.
                                                              (line  53)
* streebog256_update:                    Miscellaneous hash functions.
                                                              (line  56)
* streebog512_digest:                    Miscellaneous hash functions.
                                                              (line  29)
* streebog512_init:                      Miscellaneous hash functions.
                                                              (line  22)
* streebog512_update:                    Miscellaneous hash functions.
                                                              (line  25)
* struct aes128_ctx:                     AES.                 (line  17)
* struct aes192_ctx:                     AES.                 (line  18)
* struct aes256_ctx:                     AES.                 (line  19)
* struct arcfour_ctx:                    Arcfour.             (line  43)
* struct arctwo_ctx:                     Arctwo.              (line  23)
* struct base16_decode_ctx:              ASCII encoding.      (line 120)
* struct base64_decode_ctx:              ASCII encoding.      (line  72)
* struct base64_encode_ctx:              ASCII encoding.      (line  38)
* struct blowfish_ctx:                   Blowfish.            (line  10)
* struct camellia_ctx:                   Camellia.            (line  33)
* struct camellia128_ctx:                Camellia.            (line  27)
* struct camellia192_ctx:                Camellia.            (line  28)
* struct camellia256_ctx:                Camellia.            (line  29)
* struct cast128_ctx:                    CAST128.             (line  14)
* struct ccm_aes128_ctx:                 CCM.                 (line 167)
* struct ccm_aes192_ctx:                 CCM.                 (line 171)
* struct ccm_aes256_ctx:                 CCM.                 (line 175)
* struct ccm_ctx:                        CCM.                 (line  64)
* struct chacha_ctx:                     ChaCha.              (line  10)
* struct chacha_poly1305_ctx:            ChaCha-Poly1305.     (line  46)
* struct cmac_aes128_ctx:                CMAC.                (line  19)
* struct cmac_aes256_ctx:                CMAC.                (line  20)
* struct cmac_des3_ctx:                  CMAC.                (line  53)
* struct des_ctx:                        DES.                 (line  21)
* struct des3_ctx:                       DES3.                (line  39)
* struct drbg_ctr_aes256_ctx:            Randomness.          (line 338)
* struct eax_aes128_ctx:                 EAX.                 (line 115)
* struct eax_ctx:                        EAX.                 (line  27)
* struct eax_key:                        EAX.                 (line  23)
* struct ecc_point:                      ECDSA.               (line  26)
* struct ecc_scalar:                     ECDSA.               (line  52)
* struct gcm_aes128_ctx:                 GCM.                 (line 134)
* struct gcm_aes192_ctx:                 GCM.                 (line 135)
* struct gcm_aes256_ctx:                 GCM.                 (line 136)
* struct gcm_camellia128_ctx:            GCM.                 (line 197)
* struct gcm_camellia256_ctx:            GCM.                 (line 198)
* struct gcm_ctx:                        GCM.                 (line  32)
* struct gcm_key:                        GCM.                 (line  29)
* struct gcm_sm4_ctx:                    GCM.                 (line 251)
* struct gosthash94_ctx:                 Legacy hash functions.
                                                              (line 202)
* struct gosthash94cp_ctx:               Legacy hash functions.
                                                              (line 225)
* struct hmac_md5_ctx:                   HMAC.                (line  27)
* struct hmac_ripemd160_ctx:             HMAC.                (line  47)
* struct hmac_sha1_ctx:                  HMAC.                (line  67)
* struct hmac_sha256_ctx:                HMAC.                (line  87)
* struct hmac_sha512_ctx:                HMAC.                (line 107)
* struct hmac_sm3_ctx:                   HMAC.                (line 127)
* struct md2_ctx:                        Legacy hash functions.
                                                              (line  67)
* struct md4_ctx:                        Legacy hash functions.
                                                              (line  98)
* struct md5_ctx:                        Legacy hash functions.
                                                              (line  23)
* struct nettle_aead:                    nettle_aead abstraction.
                                                              (line   9)
* struct nettle_cipher:                  nettle_cipher abstraction.
                                                              (line  11)
* struct nettle_hash:                    nettle_hash abstraction.
                                                              (line  10)
* struct ocb_aes128_encrypt_key:         OCB.                 (line 112)
* struct ocb_ctx:                        OCB.                 (line  22)
* struct ocb_key:                        OCB.                 (line  18)
* struct poly1305_aes_ctx:               Poly1305.            (line  40)
* struct ripemd160_ctx:                  Legacy hash functions.
                                                              (line 129)
* struct salsa20_ctx:                    Salsa20.             (line  34)
* struct serpent_ctx:                    Serpent.             (line  12)
* struct sha1_ctx:                       Legacy hash functions.
                                                              (line 159)
* struct sha224_ctx:                     Recommended hash functions.
                                                              (line  55)
* struct sha256_ctx:                     Recommended hash functions.
                                                              (line  16)
* struct sha3_ctx:                       Recommended hash functions.
                                                              (line 190)
* struct sha384_ctx:                     Recommended hash functions.
                                                              (line 131)
* struct sha512_224_ctx:                 Recommended hash functions.
                                                              (line 129)
* struct sha512_256_ctx:                 Recommended hash functions.
                                                              (line 130)
* struct sha512_ctx:                     Recommended hash functions.
                                                              (line  88)
* struct siv_cmac_aes128_ctx:            SIV-CMAC.            (line  54)
* struct siv_cmac_aes256_ctx:            SIV-CMAC.            (line  58)
* struct sm3_ctx:                        Miscellaneous hash functions.
                                                              (line  87)
* struct sm4_ctx:                        SM4.                 (line  11)
* struct streebog256_ctx:                Miscellaneous hash functions.
                                                              (line  44)
* struct streebog512_ctx:                Miscellaneous hash functions.
                                                              (line  13)
* struct twofish_ctx:                    Twofish.             (line   9)
* struct umac128_ctx:                    UMAC.                (line  50)
* struct umac32_ctx:                     UMAC.                (line  47)
* struct umac64_ctx:                     UMAC.                (line  48)
* struct umac96_ctx:                     UMAC.                (line  49)
* struct xts_aes128_key:                 XTS.                 (line 112)
* struct xts_aes256_key:                 XTS.                 (line 115)
* struct yarrow_key_event_ctx:           Randomness.          (line 291)
* struct yarrow_source:                  Randomness.          (line 226)
* struct yarrow256_ctx:                  Randomness.          (line 224)
* Triple-DES:                            DES3.                (line   6)
* Twofish:                               Twofish.             (line   6)
* twofish_decrypt:                       Twofish.             (line  35)
* twofish_encrypt:                       Twofish.             (line  28)
* twofish_set_key:                       Twofish.             (line  23)
* UMAC:                                  UMAC.                (line   6)
* umac128_digest:                        UMAC.                (line 113)
* umac128_set_key:                       UMAC.                (line  76)
* umac128_set_nonce:                     UMAC.                (line  87)
* umac128_update:                        UMAC.                (line 102)
* umac32_digest:                         UMAC.                (line 107)
* umac32_set_key:                        UMAC.                (line  70)
* umac32_set_nonce:                      UMAC.                (line  81)
* umac32_update:                         UMAC.                (line  96)
* umac64_digest:                         UMAC.                (line 109)
* umac64_set_key:                        UMAC.                (line  72)
* umac64_set_nonce:                      UMAC.                (line  83)
* umac64_update:                         UMAC.                (line  98)
* umac96_digest:                         UMAC.                (line 111)
* umac96_set_key:                        UMAC.                (line  74)
* umac96_set_nonce:                      UMAC.                (line  85)
* umac96_update:                         UMAC.                (line 100)
* XEX-based tweaked-codebook mode with ciphertext stealing: XTS.
                                                              (line   6)
* XTS Mode:                              XTS.                 (line   6)
* xts_aes128_decrypt_message:            XTS.                 (line 138)
* xts_aes128_encrypt_message:            XTS.                 (line 132)
* xts_aes128_set_decrypt_key:            XTS.                 (line 122)
* xts_aes128_set_encrypt_key:            XTS.                 (line 118)
* xts_aes256_decrypt_message:            XTS.                 (line 141)
* xts_aes256_encrypt_message:            XTS.                 (line 135)
* xts_aes256_set_decrypt_key:            XTS.                 (line 124)
* xts_aes256_set_encrypt_key:            XTS.                 (line 120)
* xts_decrypt_message:                   XTS.                 (line  83)
* xts_encrypt_message:                   XTS.                 (line  80)
* yarrow_key_event_estimate:             Randomness.          (line 298)
* yarrow_key_event_init:                 Randomness.          (line 294)
* yarrow256_fast_reseed:                 Randomness.          (line 283)
* yarrow256_init:                        Randomness.          (line 232)
* yarrow256_is_seeded:                   Randomness.          (line 273)
* yarrow256_needed_sources:              Randomness.          (line 277)
* yarrow256_random:                      Randomness.          (line 263)
* yarrow256_seed:                        Randomness.          (line 238)
* yarrow256_slow_reseed:                 Randomness.          (line 284)
* yarrow256_update:                      Randomness.          (line 250)



Tag Table:
Node: Top545
Node: Introduction3111
Node: Copyright4684
Node: Using Nettle5512
Node: Example5906
Node: Conventions7197
Node: Linking9360
Node: Compatibility10880
Node: Reference14491
Node: Hash functions14913
Node: Recommended hash functions16355
Node: Miscellaneous hash functions29892
Node: Legacy hash functions33766
Ref: GOSTHASH94CP40627
Node: nettle_hash abstraction42817
Node: Cipher functions45084
Node: AES49163
Node: Arcfour52678
Node: Arctwo55162
Node: Blowfish57853
Node: Camellia62486
Node: CAST12867052
Node: ChaCha68991
Node: DES72087
Node: DES374494
Node: Salsa2077579
Node: Serpent81620
Node: SM483130
Node: Twofish84417
Node: nettle_cipher abstraction85719
Node: Cipher modes88248
Node: CBC89430
Node: CTR94359
Node: CFB and CFB896977
Node: XTS102747
Node: Authenticated encryption109122
Node: EAX112514
Node: GCM118360
Node: CCM130979
Node: ChaCha-Poly1305144140
Node: OCB147496
Node: SIV-CMAC156835
Node: SIV-GCM161552
Node: nettle_aead abstraction166467
Node: Keyed hash functions168142
Node: HMAC169785
Node: UMAC174749
Node: CMAC180395
Node: Poly1305183304
Node: Key derivation functions185892
Node: Public-key algorithms197564
Node: RSA201285
Node: RSA-Footnotes224803
Ref: RSA-Footnote-1224856
Node: DSA225034
Node: Elliptic curves235226
Node: Side-channel silence236634
Node: ECDSA238077
Node: GOSTDSA242883
Node: Curve 25519 and Curve 448246879
Node: SLH-DSA254784
Node: Randomness261660
Node: ASCII encoding279485
Node: Miscellaneous functions286406
Node: Nettle soup287532
Node: Installation288529
Node: Index289758

End Tag Table


Local Variables:
coding: utf-8
End:
